What did you do to your truck today! - Page 216 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kaycee · 11-22-2012, 04:08 PM

Finished the install of my 60/40 Tahoe seats

67Slider · 11-22-2012, 04:16 PM

Quote:

Originally Posted by kaycee

Finished the install of my 60/40 Tahoe seats

Let's see em'. I have some I've yet to install.

ChillWinstonC20 · 11-22-2012, 04:23 PM

Uneasyrider, looks like you've got the most important tools out and in use...

Jimbabwe · 11-22-2012, 10:58 PM

Technically this was yesterday, but you get the idea.

kaycee · 11-22-2012, 11:24 PM

I'll try and get some pics friday

ChillWinstonC20 · 11-22-2012, 11:34 PM

Went shopping yesterday. New wires, plugs and guides tomorrow.

UNEASYRIDER · 11-23-2012, 06:13 PM

Quote:

Originally Posted by ChillWinstonC20

Uneasyrider, looks like you've got the most important tools out and in use...

Yes Sir. A little liquid to get the job done!

VDOG · 11-23-2012, 07:38 PM

Quote:

Originally Posted by Jimbabwe

Technically this was yesterday, but you get the idea.

Like how this sits, is it static or an airbag drop?

Jimbabwe · 11-23-2012, 07:52 PM

Quote:

Originally Posted by VDOG

Like how this sits, is it static or an airbag drop?

Thank you. It's bagged, with Porterbuilt front and rear. Finishing it up now. Driveshaft, etc...

Jimbabwe · 11-23-2012, 07:56 PM

Quote:

Originally Posted by VDOG

Like how this sits, is it static or an airbag drop?

Sorry, I forgot. Here's my link with a little info if you were thinking of going that route with your stepper.

http://67-72chevytrucks.com/vboard/s...d.php?t=545435

midniteblues · 11-23-2012, 11:48 PM

got my cm prepped for running the exhaust through it. I gotta cut the tubes a lil' shorter before welding them in. I just might cut one in half and use the two halves.

Shyguy · 11-24-2012, 12:55 AM

My son drove my '67 swb steeper out to my house in the country today, first time on the road since we just finished building it.

Just one slight problem, it died and would not start about 3 blocks from my son's house.

We went back to my son's and got some supplies and tools. He checked for spark-ok, checked for fuel at carb, none. He finally isolated it to the tank as being why there was no fuel getting to the carb. He removed the pickup tube/sending unit and found that the sock had broken apart and plugged the pickup line.

Got the line all cleared out and away we went, it got home ok.

CMH77 · 11-24-2012, 01:04 AM

Today I yanked the old, dead I6 250 out of the engine bay. Tomorrow I hope I will be posting that the new, healthy I6 250 is put together from breather to oilpan and back in the truck.

**allchevy58** · 11-24-2012, 01:17 AM

Got dash back together, new ac vent hoses, new vacuum hoses on heater/ac control, new fan switch, new speaker, installed underdash lights and glovebox light purchased from forum member, new glovebox cardboard, installed blue leds in cluster, radio and heater/ac control unit. Installed new fan shroud also purchased from forum member.

Andy4639 · 11-24-2012, 03:15 AM

Well I got the SS steering wheel mounted and the new air horns work great with the new horn button.
I installed a set of the Chevy horns a few weeks back.
Can you hear me now! I think so.

*bk2life* · 11-24-2012, 04:28 AM

got more parts in the mail!! woohooo

kaycee · 11-24-2012, 01:19 PM

Heres the seats 60/40 split 99 Tahoe seats ,good junkyard find ($100)

69GWC · 11-24-2012, 01:34 PM

Wow $100 bucks :O man crazy good price and looks great.
Posted via Mobile Device

Mayo · 11-25-2012, 12:11 AM

Finally wired up the reverse lights to my LED lightbar
Posted via Mobile Device
Posted via Mobile Device

romeer1 · 11-25-2012, 12:42 AM

Painted my frame and re-installed brake booster.

VDOG · 11-25-2012, 01:00 AM

Quote:

Originally Posted by Jimbabwe

Sorry, I forgot. Here's my link with a little info if you were thinking of going that route with your stepper.

http://67-72chevytrucks.com/vboard/s...d.php?t=545435

Thanks for the link. I was going to pull a trailing arm setup from the wrecking yard, just did not know if I needed the complete rearend, or just the arms and u-bolts.

AustinScott · 11-25-2012, 02:57 AM

I found some good deals around Town on some truck parts.

Bought a new cowl hood....

Also ended up bringing home a new TV.....

Dano69c10 · 11-25-2012, 11:59 AM

Quote:

Originally Posted by VDOG

... I was going to pull a trailing arm setup from the wrecking yard, just did not know if I needed the complete rearend, or just the arms and u-bolts.

Hey Vince,
I have a rear axle, trailing arms, u-bolts, shock crossmember, shock mounts and anything else you need to convert from leafs to coils.
Dano

sumtercleaner · 11-25-2012, 04:05 PM

Quote:

Originally Posted by kaycee

Heres the seats 60/40 split 99 Tahoe seats ,good junkyard find ($100)

Many mods to make tahoe seats work? Any more leg room under sterring wheel?
Posted via Mobile Device

UNEASYRIDER · 11-25-2012, 09:43 PM

Used left over seat material for my sub box

11-22-2012, 04:08 PM	#5376
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,460	Re: What did you do to your truck today! Finished the install of my 60/40 Tahoe seats __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

11-22-2012, 04:23 PM	#5378
ChillWinstonC20 Registered User Join Date: Aug 2012 Location: Cbus, OH Posts: 48	Re: What did you do to your truck today! Uneasyrider, looks like you've got the most important tools out and in use...

11-22-2012, 10:58 PM	#5379
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: What did you do to your truck today! Technically this was yesterday, but you get the idea. Attached Images

11-22-2012, 11:24 PM	#5380
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,460	Re: What did you do to your truck today! I'll try and get some pics friday __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

11-22-2012, 11:34 PM	#5381
ChillWinstonC20 Registered User Join Date: Aug 2012 Location: Cbus, OH Posts: 48	Re: What did you do to your truck today! Went shopping yesterday. New wires, plugs and guides tomorrow.

11-23-2012, 11:48 PM	#5386
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: What did you do to your truck today! got my cm prepped for running the exhaust through it. I gotta cut the tubes a lil' shorter before welding them in. I just might cut one in half and use the two halves. Attached Images __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

11-24-2012, 12:55 AM	#5387
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: What did you do to your truck today! My son drove my '67 swb steeper out to my house in the country today, first time on the road since we just finished building it. Just one slight problem, it died and would not start about 3 blocks from my son's house. We went back to my son's and got some supplies and tools. He checked for spark-ok, checked for fuel at carb, none. He finally isolated it to the tank as being why there was no fuel getting to the carb. He removed the pickup tube/sending unit and found that the sock had broken apart and plugged the pickup line. Got the line all cleared out and away we went, it got home ok. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

11-24-2012, 01:04 AM	#5388
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: What did you do to your truck today! Today I yanked the old, dead I6 250 out of the engine bay. Tomorrow I hope I will be posting that the new, healthy I6 250 is put together from breather to oilpan and back in the truck. Last edited by CMH77; 11-24-2012 at 01:21 AM.

11-24-2012, 01:17 AM	#5389
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,441	Re: What did you do to your truck today! Got dash back together, new ac vent hoses, new vacuum hoses on heater/ac control, new fan switch, new speaker, installed underdash lights and glovebox light purchased from forum member, new glovebox cardboard, installed blue leds in cluster, radio and heater/ac control unit. Installed new fan shroud also purchased from forum member. __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

11-24-2012, 03:15 AM	#5390
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today! Well I got the SS steering wheel mounted and the new air horns work great with the new horn button. I installed a set of the Chevy horns a few weeks back. Can you hear me now! I think so. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-24-2012, 04:28 AM	#5391
bk2life Account Suspended Join Date: Oct 2012 Location: phx, az Posts: 868	Re: What did you do to your truck today! got more parts in the mail!! woohooo

11-24-2012, 01:19 PM	#5392
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,460	Re: What did you do to your truck today! Heres the seats 60/40 split 99 Tahoe seats ,good junkyard find ($100) Attached Images __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

11-24-2012, 01:34 PM	#5393
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: What did you do to your truck today! Wow $100 bucks :O man crazy good price and looks great. Posted via Mobile Device

11-25-2012, 12:11 AM	#5394
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: What did you do to your truck today! Finally wired up the reverse lights to my LED lightbar Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

11-25-2012, 12:42 AM	#5395
romeer1 Registered User Join Date: May 2011 Location: Georgia Posts: 72	Re: What did you do to your truck today! Painted my frame and re-installed brake booster. Attached Images __________________ Superman



Register or Log In To remove these advertisements.

11-25-2012, 02:57 AM	#5397
AustinScott Registered User Join Date: Dec 2007 Location: Southington CT Posts: 548	Re: What did you do to your truck today! I found some good deals around Town on some truck parts. Bought a new cowl hood.... Also ended up bringing home a new TV..... __________________ 68-SWB, 327, hooker headers, spintec mufflers, disk brake 3.5/5 drop, buddy buckets, 200-4R, 2200 stall, 3.73 12bolt Eaton Posi, My 68-SWB Photo Build Thread All my Google Albums

11-25-2012, 09:43 PM	#5400
UNEASYRIDER Registered User Join Date: Apr 2009 Location: PHOENIX,ARIZONA Posts: 91	Re: What did you do to your truck today! Used left over seat material for my sub box __________________ DON'T BUILD IT IF YOUR NOT GONA DRIVE IT!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.