And so it begins................ - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 03-24-2010, 11:41 AM

*highperf4x4* · 04-05-2010, 01:07 AM

I drove the truck all day Friday and it was cutting out on me. Acted like a fuel issue. I'll probably change the filters first since I installed a new fuel pump already last summer. I did run a compression test on it just to see what it had and 6 cylinders were about 120lbs but #5 was 110lbs and #4 was 100lbs. Not terribly bad but I am a little concerned about #4. The truck still runs pretty good though and doesn't smoke too bad yet so I'll probably keep driving it for a while and just do some body work.

JohnC · 04-05-2010, 08:31 AM

I saw you driving on West Main Friday. Didn't make the light to catch up to you though.

*highperf4x4* · 04-05-2010, 11:11 AM

Quote:

Originally Posted by JohnC

I saw you driving on West Main Friday. Didn't make the light to catch up to you though.

That is not an easy task anyway fella.

JohnC · 04-05-2010, 03:02 PM

Quote:

Originally Posted by highperf4x4

That is not an easy task anyway fella.

Whatever man. I'm not driving some ricer like you usually pick on.

Zoomin · 04-05-2010, 11:56 PM

Quote:

Originally Posted by highperf4x4

I drove the truck all day Friday and it was cutting out on me. Acted like a fuel issue. I'll probably change the filters first since I installed a new fuel pump already last summer. I did run a compression test on it just to see what it had and 6 cylinders were about 120lbs but #5 was 110lbs and #4 was 100lbs. Not terribly bad but I am a little concerned about #4. The truck still runs pretty good though and doesn't smoke too bad yet so I'll probably keep driving it for a while and just do some body work.

It's not like your engine hasn't been stress tested.

*highperf4x4* · 04-05-2010, 10:56 PM

yeah no doubt. I will have a 383 soon enough and you can test your TBSS on that one.

*highperf4x4* · 04-05-2010, 11:57 PM

I know, I sucked the headlights out of Neil's dodge and Blakes Ferd!!!!

*TheSebring* · 04-08-2010, 03:07 PM

Quote:

Originally Posted by JohnC

I saw you driving on West Main Friday. Didn't make the light to catch up to you though.

All it takes is one light, man. You can write it off after that.

Quote:

Originally Posted by highperf4x4

I know, I sucked the headlights out of Neil's dodge and Blakes Ferd!!!!

And you smoked Neil's Dodge. I didn't get into the race with you all. I just watched on. I went on by later to make my inline 6's self esteem go up a bit.

scotts62 · 04-08-2010, 06:08 PM

Do i have to get the wifes Avi and shut you guys up??

*highperf4x4* · 04-08-2010, 10:41 PM

Sounds like a challenge! How much power does her avalon have anyway?

*highperf4x4* · 04-11-2010, 12:45 PM

Well, I changed the inlet filter on the Q-jet and tried to adjust the points a little bit and the truck was still cutting out last night at the cruise so it must be something else. I'm thinking about dropping the Mallory HEI in there that used to be in the 4x4.

sourkraut · 04-11-2010, 08:50 PM

nice build travis sorry i missed it.

JohnC · 04-12-2010, 03:57 PM

Quote:

Originally Posted by sourkraut

nice build travis sorry i missed it.

He's just getting started. You got here just in time.

my67chevytruck · 04-12-2010, 04:48 PM

we all know Travis doesnt make progress

*TheSebring* · 04-12-2010, 08:24 PM

Lol, look at the 7 month primered hood

*highperf4x4* · 04-12-2010, 10:20 PM

Quote:

Originally Posted by sourkraut

nice build travis sorry i missed it.

Thanks brother. It is a slow go!

Quote:

Originally Posted by JohnC

He's just getting started. You got here just in time.

Quote:

Originally Posted by my67chevytruck

we all know Travis doesnt make progress

Quote:

Originally Posted by TheSebring

Lol, look at the 7 month primered hood

wait a minute............. bite me!

scotts62 · 04-13-2010, 07:56 AM

JohnC · 04-13-2010, 09:07 AM

*highperf4x4* · 04-18-2010, 12:24 AM

Here's some progress for you nay-sayers!!

Went out to Neils today and he and James and Steve helped me pull the trim, weld up some monster holes in the bed and even diagnose the my engine problem. James knocked the trim and clip situation and Neil welded up my bed and then whipped out his digital thermometer to find that the #6 cylinder was running about 100 degrees cooler than the rest so apparently the plug or wire is bad since the compression on that cylinder checked out fine last week.

*highperf4x4* · 04-18-2010, 12:26 AM

VA72C10 · 04-18-2010, 12:52 AM

Hey, that's what we call progress

scotts62 · 04-18-2010, 09:37 AM

sourkraut · 04-18-2010, 10:58 AM

looking good, are you going to keep the trim off?

scotts62 · 04-18-2010, 11:57 AM

Hey Travis where you at in any of those pics??

03-24-2010, 11:41 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: And so it begins................ __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2010, 01:07 AM	#2
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ I drove the truck all day Friday and it was cutting out on me. Acted like a fuel issue. I'll probably change the filters first since I installed a new fuel pump already last summer. I did run a compression test on it just to see what it had and 6 cylinders were about 120lbs but #5 was 110lbs and #4 was 100lbs. Not terribly bad but I am a little concerned about #4. The truck still runs pretty good though and doesn't smoke too bad yet so I'll probably keep driving it for a while and just do some body work.

04-05-2010, 08:31 AM	#3
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ I saw you driving on West Main Friday. Didn't make the light to catch up to you though.

04-05-2010, 10:56 PM	#7
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ yeah no doubt. I will have a 383 soon enough and you can test your TBSS on that one.

04-05-2010, 11:57 PM	#8
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ I know, I sucked the headlights out of Neil's dodge and Blakes Ferd!!!!

04-08-2010, 06:08 PM	#10
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Do i have to get the wifes Avi and shut you guys up?? __________________ Scott 93 crew cab build Project 62

04-08-2010, 10:41 PM	#11
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Sounds like a challenge! How much power does her avalon have anyway?

04-11-2010, 12:45 PM	#12
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Well, I changed the inlet filter on the Q-jet and tried to adjust the points a little bit and the truck was still cutting out last night at the cruise so it must be something else. I'm thinking about dropping the Mallory HEI in there that used to be in the 4x4.

04-11-2010, 08:50 PM	#13
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: And so it begins................ nice build travis sorry i missed it. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-12-2010, 04:48 PM	#15
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: And so it begins................ we all know Travis doesnt make progress __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-12-2010, 08:24 PM	#16
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ Lol, look at the 7 month primered hood

04-13-2010, 07:56 AM	#18
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ __________________ Scott 93 crew cab build Project 62

04-13-2010, 09:07 AM	#19
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................

04-18-2010, 12:24 AM	#20
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Here's some progress for you nay-sayers!! Went out to Neils today and he and James and Steve helped me pull the trim, weld up some monster holes in the bed and even diagnose the my engine problem. James knocked the trim and clip situation and Neil welded up my bed and then whipped out his digital thermometer to find that the #6 cylinder was running about 100 degrees cooler than the rest so apparently the plug or wire is bad since the compression on that cylinder checked out fine last week.

04-18-2010, 12:26 AM	#21
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................



Register or Log In To remove these advertisements.

04-18-2010, 12:52 AM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: And so it begins................ Hey, that's what we call progress __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-18-2010, 09:37 AM	#23
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ __________________ Scott 93 crew cab build Project 62

04-18-2010, 10:58 AM	#24
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: And so it begins................ looking good, are you going to keep the trim off? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-18-2010, 11:57 AM	#25
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Hey Travis where you at in any of those pics?? __________________ Scott 93 crew cab build Project 62

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.