What did you do to your truck today? - Page 220 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CdM · 06-01-2012, 11:49 AM

Quote:

Originally Posted by Chad215

Welded one of the several holes I keep finding in my firewall...

there are def. a few of them that are not needed!!1

scot 6 feet eleven · 06-01-2012, 01:38 PM

sprayed some paint

chevy_mike · 06-01-2012, 05:50 PM

Quote:

Originally Posted by suzq044

got entirely frustrated with it, to the point he's very close to selling PJ.

We got news in Thursday that one of our heads were cracked.We spent Friday and today looking for a replacement; to no avail, because 400sbc's are apparently a pain in the [bleep] to find.. We don't have the money to buy new ones, so.. we're kind of screwed right now, with this truck.

Honestly, 400's are more of a PITA then they are worth. If I was in your shoes, I would seriously look at swapping it out for a 350 which can be had much easier and cheaper.

When I bought my Panel, I was told it was a "400" but after running the numbers, it was a 305. I was much happier as though not a powerhouse, they have less issues than 400's.

Good luck with yours. I still haven't gotten mine on the road yet...

markeb01 · 06-01-2012, 08:56 PM

Washed the truck for a car show this weekend, got to take a picture of a B17 flying by, the wide windshield trim was delivered today, and the full floor vinyl floor mat will be here next week! It was a good day!

62 Barnfind · 06-01-2012, 10:20 PM

Sans, sand, sand , sand, cuss, sand, cuss, sand and still no primer!

65Gregg · 06-01-2012, 11:19 PM

Told my son to wash mine so he could take it to a local car show while I'm in Nashville at a BMX race with my daughter.
Posted via Mobile Device

dantimdad · 06-01-2012, 11:52 PM

I welded up the new bottom piece for the core support.

It turned out great! Tomorrow I am grinding the welds smooth and painting it.

It will be good to FINALLY have at least one part done!

Steven

doobiebro · 06-02-2012, 02:03 AM

Quote:

Originally Posted by markeb01

Washed the truck for a car show this weekend, got to take a picture of a B17 flying by, the wide windshield trim was delivered today, and the full floor vinyl floor mat will be here next week! It was a good day!

makeb01 let us know how the full floor vinyl floor mat comes out??

markeb01 · 06-02-2012, 02:37 AM

Quote:

Originally Posted by doobiebro

makeb01 let us know how the full floor vinyl floor mat comes out??

10-4. A bunch of us have been asking about this mat for a year or more, but apparently no one on the forum has installed the entire mat yet to provide photos. I'll get some good clear shots whether it fits great or turns out to be a disappointment.

a37lesalle · 06-02-2012, 08:04 AM

finally figured ir out

a37lesalle · 06-02-2012, 08:08 AM

Sorry, no explination. Bottom pic is pretty much how she looked when started. Top pic, I stripped out the interior and painted it. Previouse owner had a hole cut in dash so I cleaned it up and installed stereo. Grand Daughter cant wait to hear some tunes.

markeb01 · 06-02-2012, 11:37 AM

Classic kid priority - nothing more important than making sure the radio works! Great photo.

CdM · 06-02-2012, 02:21 PM

Quote:

Originally Posted by 62 Barnfind

Sans, sand, sand , sand, cuss, sand, cuss, sand and still no primer!

Im right there with ya, just in a different state

67C10serch · 06-02-2012, 04:26 PM

Changed the oil on my 65.

Sillyoldman · 06-02-2012, 04:46 PM

Quote:

Originally Posted by Raked 64

Installed the 406 small block and 350 auto trans for the second time. (had a smoking issue the first go around)
So I dressed up a few things while I had it out

New Edelbrock Powdercoated intake and a aluminum oil pan.

Nom nom nom

1enick72 · 06-02-2012, 06:05 PM

Replaced my heater core that had sprung a leak. Sanded up and painted the housing while I had it out.

wagonslayer · 06-02-2012, 09:18 PM

Painted the wheels red.

Str8-6-68 · 06-02-2012, 09:27 PM

on my daily driver i painted the valve cover hammered texture black but didnt like it so stripped it down and painted it a hammered texture charcoal grey to match my twin pipes. I also chopped and tacked my project 68 frame.

62 Barnfind · 06-03-2012, 02:08 PM

1st coat of primer on my truck.

Narxoleptic Customs · 06-03-2012, 04:25 PM

Finished the front bumper brackets and remount. Driving it for at least a steady hour today to test for the power tour on weds...
Posted via Mobile Device

Breadstick · 06-03-2012, 04:36 PM

Installed the middle seat belt so I can take my kids fishing. Too bad I'm work this weekend and they're in school next week. Maybe the week after.

Str8-6-68 · 06-03-2012, 05:09 PM

after the clear coat was all dry i installed my charcoal grey valve cover on my daily driver. now all the details match under the hood.

tincan1966 · 06-03-2012, 07:39 PM

On the '66 Burb:
Well, after alot of disCUSSion, found my mathmatical errors on my front crossmember. Luckily, the fix was simple and all is square again with the world!. Re-installed the upper and lower control arms, made new lower bag mounts and installed eng/trans. Hopefully will have the steering u-joints later this week and will have the column mounted, also.
Been away from this project for about a month while getting the shop truck to driver status. Will post pics later this week.

Sillyoldman · 06-03-2012, 07:56 PM

I ordered a new alt harness to replace the fire damaged one. I spent the day doing minor body work and got the cab interior primered.

robber grin · 06-03-2012, 08:03 PM

I got my 78 burb crossmember bolted in my 62 C10.

06-01-2012, 01:38 PM	#5477
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: What did you do to your truck today? sprayed some paint Attached Images __________________ 1960 chevy 4.6 police interceptor chassis under this bad boy with 24 inch lexani's

06-01-2012, 08:56 PM	#5479
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Washed the truck for a car show this weekend, got to take a picture of a B17 flying by, the wide windshield trim was delivered today, and the full floor vinyl floor mat will be here next week! It was a good day! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

06-01-2012, 10:20 PM	#5480
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: What did you do to your truck today? Sans, sand, sand , sand, cuss, sand, cuss, sand and still no primer! __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

06-01-2012, 11:19 PM	#5481
65Gregg Registered User Join Date: Jul 2006 Location: Willis, Texas Posts: 754	Re: What did you do to your truck today? Told my son to wash mine so he could take it to a local car show while I'm in Nashville at a BMX race with my daughter. Posted via Mobile Device __________________ 65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain

06-01-2012, 11:52 PM	#5482
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? I welded up the new bottom piece for the core support. It turned out great! Tomorrow I am grinding the welds smooth and painting it. It will be good to FINALLY have at least one part done! Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

06-02-2012, 08:04 AM	#5485
a37lesalle Registered User Join Date: Mar 2012 Location: Bakersfield calif Posts: 40	Re: What did you do to your truck today? finally figured ir out Attached Images

06-02-2012, 08:08 AM	#5486
a37lesalle Registered User Join Date: Mar 2012 Location: Bakersfield calif Posts: 40	Re: What did you do to your truck today? Sorry, no explination. Bottom pic is pretty much how she looked when started. Top pic, I stripped out the interior and painted it. Previouse owner had a hole cut in dash so I cleaned it up and installed stereo. Grand Daughter cant wait to hear some tunes.

06-02-2012, 11:37 AM	#5487
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Classic kid priority - nothing more important than making sure the radio works! Great photo. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

06-02-2012, 04:26 PM	#5489
67C10serch Registered User Join Date: May 2012 Location: Murphy North Carolina Posts: 22	Re: What did you do to your truck today? Changed the oil on my 65.

06-02-2012, 06:05 PM	#5491
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: What did you do to your truck today? Replaced my heater core that had sprung a leak. Sanded up and painted the housing while I had it out.

06-02-2012, 09:18 PM	#5492
wagonslayer Registered User Join Date: May 2012 Location: Poulsbo WA Posts: 57	Re: What did you do to your truck today? Painted the wheels red. Attached Images

06-02-2012, 09:27 PM	#5493
Str8-6-68 Registered User Join Date: Sep 2011 Location: B.C. Posts: 137	Re: What did you do to your truck today? on my daily driver i painted the valve cover hammered texture black but didnt like it so stripped it down and painted it a hammered texture charcoal grey to match my twin pipes. I also chopped and tacked my project 68 frame. __________________ 12ram3500 HS mm, FP 5" tbe, SB cai, 2.5" up, 35s on 20s. SOLD 02ram2500 twin turbo, built 47re, sticks & studs : SIKDZL -youtube. 68gmc1500 soon to be: shortbox, ppumped 24valve, s467.7, dap 300s, H2O/Air intecooled, meth controlled, 47re, 14bolt, 2wd.

06-03-2012, 02:08 PM	#5494
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: What did you do to your truck today? 1st coat of primer on my truck. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

06-03-2012, 04:25 PM	#5495
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: What did you do to your truck today? Finished the front bumper brackets and remount. Driving it for at least a steady hour today to test for the power tour on weds... Posted via Mobile Device

06-03-2012, 04:36 PM	#5496
Breadstick Registered User Join Date: Mar 2012 Location: Scott AFB, IL Posts: 210	Re: What did you do to your truck today? Installed the middle seat belt so I can take my kids fishing. Too bad I'm work this weekend and they're in school next week. Maybe the week after.



Register or Log In To remove these advertisements.

06-03-2012, 05:09 PM	#5497
Str8-6-68 Registered User Join Date: Sep 2011 Location: B.C. Posts: 137	Re: What did you do to your truck today? after the clear coat was all dry i installed my charcoal grey valve cover on my daily driver. now all the details match under the hood. __________________ 12ram3500 HS mm, FP 5" tbe, SB cai, 2.5" up, 35s on 20s. SOLD 02ram2500 twin turbo, built 47re, sticks & studs : SIKDZL -youtube. 68gmc1500 soon to be: shortbox, ppumped 24valve, s467.7, dap 300s, H2O/Air intecooled, meth controlled, 47re, 14bolt, 2wd.

06-03-2012, 07:39 PM	#5498
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today? On the '66 Burb: Well, after alot of disCUSSion, found my mathmatical errors on my front crossmember. Luckily, the fix was simple and all is square again with the world!. Re-installed the upper and lower control arms, made new lower bag mounts and installed eng/trans. Hopefully will have the steering u-joints later this week and will have the column mounted, also. Been away from this project for about a month while getting the shop truck to driver status. Will post pics later this week.

06-03-2012, 07:56 PM	#5499
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: What did you do to your truck today? I ordered a new alt harness to replace the fire damaged one. I spent the day doing minor body work and got the cab interior primered. Attached Images __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

06-03-2012, 08:03 PM	#5500
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? I got my 78 burb crossmember bolted in my 62 C10. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.