project 62 - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TimE · 05-11-2010, 10:53 PM

Hey Scott, ya gotta big hole in the floor.

J/K

Looks good. You're getting there with it!! Get crackin' so we can go for a ride in July!!

**scotts62** · 05-11-2010, 11:05 PM

i wish but you never know.

When you coming in July?

TimE · 05-11-2010, 11:13 PM

Plan on getting there the evening of the 3rd and staying until around the 10th or 11th. Hope to hook up with you guys at some point while we're there.

**scotts62** · 05-11-2010, 11:33 PM

Cool man give us a haller.

JohnC · 05-12-2010, 09:36 AM

Looks good Scott.

Look forward to seeing ya again Tim.

dougminton · 05-13-2010, 02:08 PM

Cant believe I just found this thread DOH

**scotts62** · 05-13-2010, 02:11 PM

Quote:

Originally Posted by dougminton

Cant believe I just found this thread DOH

Well about time

**scotts62** · 05-13-2010, 02:20 PM

Going out there tonight to finish primering the cab and some odd and end things, my grinder went out so guess ill have to pick one up this weekend.

JohnC · 05-13-2010, 03:20 PM

So since you are primering then it raining on it shouldn't be a problem.

**scotts62** · 05-13-2010, 03:42 PM

The frame isnt done and is bare metal from front to back

dougminton · 05-13-2010, 03:52 PM

Rattle can party friday night you say? I'M IN

**scotts62** · 05-13-2010, 04:00 PM

Quote:

Originally Posted by dougminton

Rattle can party friday night you say? I'M IN

JohnC · 05-13-2010, 05:37 PM

Quote:

Originally Posted by dougminton

Rattle can party friday night you say? I'M IN

There ya go. That's the spirit. I'll grab some really good colors to use.

**scotts62** · 05-22-2010, 09:25 PM

Got the drive shaft for it but i have to do some things to the frame before i can put it in

JohnC · 05-23-2010, 11:52 AM

Progress is progress

**scotts62** · 05-23-2010, 12:09 PM

Think i may have figured out how im going to mount the air tanks but i have to get the drive shaft in and figure out what hits or wont hit.

Here is my highly qualified drawing

Red is where im thinking the air tanks may fit.. just hope i dont sling the drive shaft

JohnC · 05-23-2010, 12:18 PM

If you sling a driveshaft as low as you are anyway. The air tanks won't be the only problem.

Strodder · 05-23-2010, 02:37 PM

Quote:

Originally Posted by scotts62

Think i may have figured out how im going to mount the air tanks but i have to get the drive shaft in and figure out what hits or wont hit.

Here is my highly qualified drawing

Red is where im thinking the air tanks may fit.. just hope i dont sling the drive shaft

Hey Scott. I have a lot of reading to do to catch up with your build. I just saw it today and subscribed. If your worried about if the drive shaft breaks use one of these. You might sleep better

BTW nice work.

http://www.cachassisworks.com/c-151-...and-ovals.aspx

**scotts62** · 05-23-2010, 05:08 PM

Hey thanks Dennis!!

Yeah i was going to figure out something like that just in case.

*BGRAFX* · 06-03-2010, 11:18 PM

Nice build you've got some talent

**scotts62** · 06-03-2010, 11:26 PM

Hey thank you sir, its a slow work in progress at the moment.

*BGRAFX* · 06-03-2010, 11:31 PM

Of course its slow progress when your building a bad crewcab and gotta work on every other okie board members rides too.

**scotts62** · 06-03-2010, 11:43 PM

yeah Joe came over tonight and stole some more parts to finish his

protrash64 · 06-04-2010, 06:17 PM

Are those clear air tanks made of the same stuff as Wonderwomans' jet?

**scotts62** · 06-04-2010, 06:19 PM

Quote:

Originally Posted by protrash64

Are those clear air tanks made of the same stuff as Wonderwomans' jet?

Oh yeah only better

05-11-2010, 10:53 PM	#676
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: project 62 Hey Scott, ya gotta big hole in the floor. J/K Looks good. You're getting there with it!! Get crackin' so we can go for a ride in July!! __________________ Just hopin' I live long enough to finish something!!! Last edited by TimE; 05-11-2010 at 10:53 PM. Reason: punctuation.,,/.,

05-11-2010, 11:05 PM	#677
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 i wish but you never know. When you coming in July? __________________ Scott 93 crew cab build Project 62

05-11-2010, 11:13 PM	#678
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: project 62 Plan on getting there the evening of the 3rd and staying until around the 10th or 11th. Hope to hook up with you guys at some point while we're there. __________________ Just hopin' I live long enough to finish something!!!

05-11-2010, 11:33 PM	#679
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Cool man give us a haller. __________________ Scott 93 crew cab build Project 62

05-12-2010, 09:36 AM	#680
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 Looks good Scott. Look forward to seeing ya again Tim.

05-13-2010, 02:08 PM	#681
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: project 62 Cant believe I just found this thread DOH __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

05-13-2010, 02:20 PM	#683
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Going out there tonight to finish primering the cab and some odd and end things, my grinder went out so guess ill have to pick one up this weekend. __________________ Scott 93 crew cab build Project 62

05-13-2010, 03:20 PM	#684
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 So since you are primering then it raining on it shouldn't be a problem.

05-13-2010, 03:42 PM	#685
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 The frame isnt done and is bare metal from front to back __________________ Scott 93 crew cab build Project 62

05-13-2010, 03:52 PM	#686
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: project 62 Rattle can party friday night you say? I'M IN __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

05-22-2010, 09:25 PM	#689
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Got the drive shaft for it but i have to do some things to the frame before i can put it in __________________ Scott 93 crew cab build Project 62

05-23-2010, 11:52 AM	#690
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 Progress is progress

05-23-2010, 12:09 PM	#691
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Think i may have figured out how im going to mount the air tanks but i have to get the drive shaft in and figure out what hits or wont hit. Here is my highly qualified drawing Red is where im thinking the air tanks may fit.. just hope i dont sling the drive shaft __________________ Scott 93 crew cab build Project 62

05-23-2010, 12:18 PM	#692
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: project 62 If you sling a driveshaft as low as you are anyway. The air tanks won't be the only problem.

05-23-2010, 05:08 PM	#694
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Hey thanks Dennis!! Yeah i was going to figure out something like that just in case. __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

06-03-2010, 11:18 PM	#695
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: project 62 Nice build you've got some talent

06-03-2010, 11:26 PM	#696
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Hey thank you sir, its a slow work in progress at the moment. __________________ Scott 93 crew cab build Project 62

06-03-2010, 11:31 PM	#697
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: project 62 Of course its slow progress when your building a bad crewcab and gotta work on every other okie board members rides too.

06-03-2010, 11:43 PM	#698
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 yeah Joe came over tonight and stole some more parts to finish his __________________ Scott 93 crew cab build Project 62

06-04-2010, 06:17 PM	#699
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: project 62 Are those clear air tanks made of the same stuff as Wonderwomans' jet? __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.