What did you do to your Blazer/Jimmy today? - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 02-10-2018, 12:56 PM

Now on to the GB insert...

Spf79 · 02-10-2018, 02:30 PM

Quote:

Originally Posted by lks dcvn

You are going to love the Red Head Steering Gear - have them on both of my projects now. The upgrade was well worth the $.

Glad to hear it! This was an upgrade I wanted to do since I started the project.

Spf79 · 02-10-2018, 02:32 PM

Quote:

Originally Posted by DeadheadNM

...

Looks great!

**SoCoC10** · 02-16-2018, 08:39 PM

Quote:

Originally Posted by DeadheadNM

...

Pete,

That cluster looks terrible! Send it to me and I'll get you a blue light special from LMC. 😉

**SoCoC10** · 02-16-2018, 08:52 PM

Medium Blue CST is getting some attention. Bucket seats upholstery removed to evaluate frames and foam.

stangtjk · 03-02-2018, 11:00 PM

Started fixing a previous door repair around the upper hinge, or what someone considered a repair anyway.... They scabbed a piece in from another truck and tried to weld up the rusty junk and blew hole through it everywhere... Looks like they were pretty persistent trying to keep filling in back in.

chevlady · 03-02-2018, 11:57 PM

Finished the engine swap in mine,put in a 350 in place of the 307.Runs good now.Took the pan off the 307 with the oil pan down on the engine stand.Found lots of metal shavings in the pan,3 wasted rods and the crankshaft is tore up.I may rebuild this one if I find a good 307 crankshaft.A friend of mine has a cousin that may have one.The Machine shop I deal with has 3 good 307 rods,told me $20.00 for them and said deal.

Walter White · 03-22-2018, 10:55 PM

bump

**7D2N** · 03-24-2018, 08:25 PM

Cleaning up some stuff.

socalfyrengineer · 03-24-2018, 10:22 PM

Started on my Patina........ Name: patina1a.jpg
Views: 889
Size: 76.7 KB

Name: patina2a.jpg
Views: 888
Size: 19.4 KB

bobshotrodblazer · 03-25-2018, 11:48 AM

Dropped off my 72 to a local old school body shop 2 weeks ago.83 k original miles in remarkable shape but a lot of dents. 1 owner blazer. PO used it for a work truck from new .I did all the rust repair and now the Shop is stripping down to bare metal.pulling dents and blocking it out. Going to be medium olive green. He said hopefully base clear paint in a couple weeks.

dirish · 03-25-2018, 01:18 PM

Looking Great Bob!!

**Tomo** · 03-26-2018, 07:24 AM

Quote:

Originally Posted by bobshotrodblazer

Dropped off my 72 to a local old school body shop 2 weeks ago.83 k original miles in remarkable shape but a lot of dents. 1 owner blazer. PO used it for a work truck from new .I did all the rust repair and now the Shop is stripping down to bare metal.pulling dents and blocking it out. Going to be medium olive green. He said hopefully base clear paint in a couple weeks.

Looks great Bob! Looking forward to seeing more photos.

mister.freeze · 03-26-2018, 04:00 PM

new Energy Suspension body mounts. So THAT'S how the doors are supposed to open and close!

**maldo** · 03-28-2018, 08:44 PM

this winter I put a 700R4 and put in new interior, I would like some feed back on both, how do you feel about changing the turbo 350 for a 700r4 and what do you think about interior. My blazer is a 2wd Highlander so I'm slowly trying to make it look stock, I know the color is not stock but will be when I'm done. I know there are people who have seen Highlander interiors first hand so your opinions will be greatly appreciated. Thank you in advance.

**DeadheadNM** · 03-28-2018, 09:26 PM

Quote:

Originally Posted by maldo

this winter I put a 700R4 and put in new interior, I would like some feed back on both, how do you feel about changing the turbo 350 for a 700r4 and what do you think about interior. My blazer is a 2wd Highlander so I'm slowly trying to make it look stock, I know the color is not stock but will be when I'm done. I know there are people who have seen Highlander interiors first hand so your opinions will be greatly appreciated. Thank you in advance.

Maldo, very nice highlander. If you get the chance please post up more photos to the plaid k5 thread here: http://67-72chevytrucks.com/vboard/s...d.php?t=635033

**DeadheadNM** · 03-28-2018, 09:49 PM

Replated then powder coated hatch hinges...

**maldo** · 03-28-2018, 09:58 PM

The hinges look great, vary nice job,

**maldo** · 03-28-2018, 09:59 PM

Deadheadnm will do asap. Thank you for your response.

dirish · 03-29-2018, 03:13 AM

Quote:

Originally Posted by maldo

this winter I put a 700R4 and put in new interior, I would like some feed back on both, how do you feel about changing the turbo 350 for a 700r4 and what do you think about interior. My blazer is a 2wd Highlander so I'm slowly trying to make it look stock, I know the color is not stock but will be when I'm done. I know there are people who have seen Highlander interiors first hand so your opinions will be greatly appreciated. Thank you in advance.

Beautiful! I am a fan of the green and parchment! Looks great!

**maldo** · 03-29-2018, 01:33 PM

Thanks dirish.

briank · 04-20-2018, 06:36 PM

Well....today I took off in my jimmy and the swing away spare carrier must not have beem fully latched and it certainly swung away....all the way around and dented the passenger bed side. Dent can probably be removed by a paintless dent removal guy but it cracked the paint.....doh!!

Chulisohombre · 04-20-2018, 06:41 PM

Quote:

Originally Posted by briank

Well....today I took off in my jimmy and the swing away spare carrier must not have beem fully latched and it certainly swung away....all the way around and dented the passenger bed side. Dent can probably be removed by a paintless dent removal guy but it cracked the paint.....doh!!

That sucks. Time for a touch up.
Posted via Mobile Device

**3757chevy** · 05-01-2018, 12:29 PM

Registered for a local car show. http://florencecoloradocarshow.com/ After I put on my summer tires and wheels.

Another 72 · 05-06-2018, 09:22 PM

Converted a passenger side truck door to a Blazer door - remarkably easy!

02-10-2018, 12:56 PM	#676
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: What did you do to your Blazer/Jimmy today? Now on to the GB insert... Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-16-2018, 08:52 PM	#680
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,343	Re: What did you do to your Blazer/Jimmy today? Medium Blue CST is getting some attention. Bucket seats upholstery removed to evaluate frames and foam. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

03-02-2018, 11:00 PM	#681
stangtjk Registered User Join Date: Nov 2016 Location: Newport News Posts: 249	Re: What did you do to your Blazer/Jimmy today? Started fixing a previous door repair around the upper hinge, or what someone considered a repair anyway.... They scabbed a piece in from another truck and tried to weld up the rusty junk and blew hole through it everywhere... Looks like they were pretty persistent trying to keep filling in back in. Attached Images

03-02-2018, 11:57 PM	#682
chevlady Registered User Join Date: Nov 2017 Location: Mi Posts: 98	Re: What did you do to your Blazer/Jimmy today? Finished the engine swap in mine,put in a 350 in place of the 307.Runs good now.Took the pan off the 307 with the oil pan down on the engine stand.Found lots of metal shavings in the pan,3 wasted rods and the crankshaft is tore up.I may rebuild this one if I find a good 307 crankshaft.A friend of mine has a cousin that may have one.The Machine shop I deal with has 3 good 307 rods,told me $20.00 for them and said deal.

03-22-2018, 10:55 PM	#683
Walter White Registered User Join Date: Oct 2015 Location: Charlotte, NC Posts: 113	Re: What did you do to your Blazer/Jimmy today? bump

03-24-2018, 08:25 PM	#684
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 722	Re: What did you do to your Blazer/Jimmy today? Cleaning up some stuff. Attached Images __________________ Just for the fun of it

03-24-2018, 10:22 PM	#685
socalfyrengineer Registered User Join Date: Feb 2017 Location: Riverside California Posts: 10	Re: What did you do to your Blazer/Jimmy today? Started on my Patina........

03-25-2018, 11:48 AM	#686
bobshotrodblazer BigBlockBobby Join Date: Mar 2004 Location: Lake Worth, Florida Posts: 740	Re: What did you do to your Blazer/Jimmy today? Dropped off my 72 to a local old school body shop 2 weeks ago.83 k original miles in remarkable shape but a lot of dents. 1 owner blazer. PO used it for a work truck from new .I did all the rust repair and now the Shop is stripping down to bare metal.pulling dents and blocking it out. Going to be medium olive green. He said hopefully base clear paint in a couple weeks. Attached Images __________________ Bob

03-25-2018, 01:18 PM	#687
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: What did you do to your Blazer/Jimmy today? Looking Great Bob!!

03-26-2018, 04:00 PM	#689
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	Re: What did you do to your Blazer/Jimmy today? new Energy Suspension body mounts. So THAT'S how the doors are supposed to open and close! __________________ '72 K5, known as 'the Fox.'

03-28-2018, 08:44 PM	#690
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 706	Re: What did you do to your Blazer/Jimmy today? this winter I put a 700R4 and put in new interior, I would like some feed back on both, how do you feel about changing the turbo 350 for a 700r4 and what do you think about interior. My blazer is a 2wd Highlander so I'm slowly trying to make it look stock, I know the color is not stock but will be when I'm done. I know there are people who have seen Highlander interiors first hand so your opinions will be greatly appreciated. Thank you in advance. Attached Images

03-28-2018, 09:49 PM	#692
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: What did you do to your Blazer/Jimmy today? Replated then powder coated hatch hinges... Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-28-2018, 09:58 PM	#693
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 706	Re: What did you do to your Blazer/Jimmy today? The hinges look great, vary nice job,

03-28-2018, 09:59 PM	#694
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 706	Re: What did you do to your Blazer/Jimmy today? Deadheadnm will do asap. Thank you for your response.

03-29-2018, 01:33 PM	#696
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 706	Re: What did you do to your Blazer/Jimmy today? Thanks dirish.



Register or Log In To remove these advertisements.

04-20-2018, 06:36 PM	#697
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: What did you do to your Blazer/Jimmy today? Well....today I took off in my jimmy and the swing away spare carrier must not have beem fully latched and it certainly swung away....all the way around and dented the passenger bed side. Dent can probably be removed by a paintless dent removal guy but it cracked the paint.....doh!!

05-01-2018, 12:29 PM	#699
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,074	Re: What did you do to your Blazer/Jimmy today? Registered for a local car show. http://florencecoloradocarshow.com/ After I put on my summer tires and wheels. Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

05-06-2018, 09:22 PM	#700
Another 72 Registered User Join Date: Apr 2016 Location: Woodbridge Virginia Posts: 81	Re: What did you do to your Blazer/Jimmy today? Converted a passenger side truck door to a Blazer door - remarkably easy! __________________ Rob "1967 Wanna Be" 1972 K5 Blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.