Vintage air - huge sale! - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JJH Jimmy · 01-06-2021, 03:47 PM

Hey Matt, I am looking for a quote for a vintage air system for a 85 K20 non AC cab shipped to 49087.

Thank you!

**MCB Matt** · 01-06-2021, 03:54 PM

Quote:

Originally Posted by JJH Jimmy

Hey Matt, I am looking for a quote for a vintage air system for a 85 K20 non AC cab shipped to 49087.

Thank you!

PM on the way!
Thanks,
Kim
MCBparts

**C101972** · 01-26-2021, 06:59 AM

Hi , Can I get quote for my 1972 c10 factory air cab with a big block Chevy. I like the look of the factory controls but if you have them electronically controlled that would be awesome. Compressor mounted on passenger side but don’t need it. Thanks
Posted via Mobile Device

**MCB Matt** · 01-26-2021, 12:08 PM

Quote:

Originally Posted by C101972

Hi , Can I get quote for my 1972 c10 factory air cab with a big block Chevy. I like the look of the factory controls but if you have them electronically controlled that would be awesome. Compressor mounted on passenger side but don’t need it. Thanks
Posted via Mobile Device

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

**C101972** · 01-26-2021, 12:15 PM

Quote:

Originally Posted by MCB Matt

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

Hi again, What’s the part number of the kit? What are my other options for not using my controller and pricing of it.
Posted via Mobile Device

**BIG ORANGE** · 01-30-2021, 03:31 PM

I got a 71 non A/C truck, price on unit with vents along the bottom of dash and compressor on Pass, side. electric controls.
29720 zip
thanxs Donnie

01chevduramax · 02-06-2021, 11:59 AM

Can I get a quote, and lead time for a gen IV kit for my 1971 truck? I want to use the factory AC controls. I do not need a compressor or lines. It’s a factory AC truck with a shaved firewall.

**MCB Matt** · 02-08-2021, 01:03 PM

Quote:

Originally Posted by 01chevduramax

Can I get a quote, and lead time for a gen IV kit for my 1971 truck? I want to use the factory AC controls. I do not need a compressor or lines. It’s a factory AC truck with a shaved firewall.

PM has been sent.
Thanks
MCbparts

88Stanger · 02-13-2021, 11:18 AM

Just a note: I bought my full system from MCB Matt - Matt's Classic Bowties and they have some of the best customer relations!! Fast shipping, cheap prices... i fully recommend them!!

**MCB Matt** · 02-15-2021, 12:19 PM

Quote:

Originally Posted by 88Stanger

Just a note: I bought my full system from MCB Matt - Matt's Classic Bowties and they have some of the best customer relations!! Fast shipping, cheap prices... i fully recommend them!!

Thank you very much! We truly appreciate your support and kind words!

Thanks again!
Kim
MCBparts
925-828-5555

**Tmend** · 02-16-2021, 12:53 AM

Looking for a complete system for my 72 blazer. Right side mounted compressor and will also need control panel. Please quote me.

**MCB Matt** · 02-16-2021, 01:04 PM

Quote:

Originally Posted by Tmend

Looking for a complete system for my 72 blazer. Right side mounted compressor and will also need control panel. Please quote me.

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

weasel29gm · 02-17-2021, 07:28 PM

Need quote on 69 non air rh side to 25070 thanks for your time

**MCB Matt** · 02-17-2021, 07:55 PM

Quote:

Originally Posted by weasel29gm

Need quote on 69 non air rh side to 25070 thanks for your time

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

jonesky2 · 02-22-2021, 02:50 PM

Looking for a quote for my 72c10. Non factory air, using factory air controller. Would like the to see if you could also get the sanden sd7 model 7176 mini compressor

**MCB Matt** · 02-22-2021, 02:54 PM

Quote:

Originally Posted by jonesky2

Looking for a quote for my 72c10. Non factory air, using factory air controller. Would like the to see if you could also get the sanden sd7 model 7176 mini compressor

PM on the way.
Thanks
Kim
MCBparts

**Hawkynz** · 02-28-2021, 11:09 PM

Hello Matt,

Looking to use a Vintage Air in my 1970 GMC non factory air. Using an LS engine with the LS compressor on the passenger side. Looking for a quote please.
Thank you James

**MCB Matt** · 03-01-2021, 01:12 PM

Quote:

Originally Posted by Hawkynz

Hello Matt,

Looking to use a Vintage Air in my 1970 GMC non factory air. Using an LS engine with the LS compressor on the passenger side. Looking for a quote please.
Thank you James

PM on the way!
Thanks
Kim
MCbparts

**gpat@earthlink.net** · 03-03-2021, 11:24 PM

Hey Matt. Need a price on a system for a 72 Blazer. I have converted the dash to an AC dash with the round side vents and center vent. Quote with and with compressor. i do have the original compressor already fitted on engine. Switches to look like original . Firewall has been smoothed out . Thanks Pat.

**MCB Matt** · 03-04-2021, 12:50 PM

Quote:

Originally Posted by gpat@earthlink.net

Hey Matt. Need a price on a system for a 72 Blazer. I have converted the dash to an AC dash with the round side vents and center vent. Quote with and with compressor. i do have the original compressor already fitted on engine. Switches to look like original . Firewall has been smoothed out . Thanks Pat.

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

scf100 · 03-08-2021, 05:29 PM

Matt,

need a qoute on Vintage AC setup for a 1970 Chevy 2WD Blazer non AC cab......BBC and auto trans

Thanks,
Stuart

**MCB Matt** · 03-08-2021, 05:50 PM

Quote:

Originally Posted by scf100

Matt,

need a qoute on Vintage AC setup for a 1970 Chevy 2WD Blazer non AC cab......BBC and auto trans

Thanks,
Stuart

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

Peanut74 · 03-14-2021, 09:22 AM

Hi Matt,
I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is:
- '67 cab with factory A/C dash
- Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to
- I used an early serpentine system and it is setup for an R4 compressor
- Compressor is on the passenger side
- I do have the outer A/C vents but the center vent outer cover is broken.
- Would like to use the Surefit design with the electronic conversion of the factory control
- I will need the A/C hoses, and interior ducting for both and A/C and defrost

Thanks,
Bob

**MCB Matt** · 03-15-2021, 12:11 PM

Hello,
PM on the way.
Thanks
Kim
MCBparts
925-828-5555

Quote:

Originally Posted by Peanut74

Hi Matt,
I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is:
- '67 cab with factory A/C dash
- Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to
- I used an early serpentine system and it is setup for an R4 compressor
- Compressor is on the passenger side
- I do have the outer A/C vents but the center vent outer cover is broken.
- Would like to use the Surefit design with the electronic conversion of the factory control
- I will need the A/C hoses, and interior ducting for both and A/C and defrost

Thanks,
Bob

Moore87 · 03-16-2021, 02:11 PM

Can I get a price on a complete system for a 1971 GMC with factory air?

I will also need the R-4 conversion bracket for the compressor. Will also need a 6 rib serpentine pulley on the new compressor instead of the V belt pulley

01-06-2021, 03:47 PM	#676
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 928	Re: Vintage air - huge sale! Hey Matt, I am looking for a quote for a vintage air system for a 85 K20 non AC cab shipped to 49087. Thank you! __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

01-30-2021, 03:31 PM	#681
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Vintage air - huge sale! I got a 71 non A/C truck, price on unit with vents along the bottom of dash and compressor on Pass, side. electric controls. 29720 zip thanxs Donnie __________________ Things happen for a reason!

02-06-2021, 11:59 AM	#682
01chevduramax Registered User Join Date: Apr 2009 Location: Knappa, Oregon Posts: 114	Re: Vintage air - huge sale! Can I get a quote, and lead time for a gen IV kit for my 1971 truck? I want to use the factory AC controls. I do not need a compressor or lines. It’s a factory AC truck with a shaved firewall. __________________ '71 org/wht 3/4 ton 4x4

02-13-2021, 11:18 AM	#684
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: Vintage air - huge sale! Just a note: I bought my full system from MCB Matt - Matt's Classic Bowties and they have some of the best customer relations!! Fast shipping, cheap prices... i fully recommend them!! __________________ John 3:16 - Saved me... God Bless

02-16-2021, 12:53 AM	#686
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,305	Re: Vintage air - huge sale! Looking for a complete system for my 72 blazer. Right side mounted compressor and will also need control panel. Please quote me. __________________ Some progress is better then no progress

01-26-2021, 06:59 AM	#678
C101972 Senior Member Join Date: Jan 2021 Location: Saint Cloud, Minnesota Posts: 539	Hi , Can I get quote for my 1972 c10 factory air cab with a big block Chevy. I like the look of the factory controls but if you have them electronically controlled that would be awesome. Compressor mounted on passenger side but don’t need it. Thanks Posted via Mobile Device

02-17-2021, 07:28 PM	#688
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Re: Vintage air - huge sale! Need quote on 69 non air rh side to 25070 thanks for your time __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

02-22-2021, 02:50 PM	#690
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: Vintage air - huge sale! Looking for a quote for my 72c10. Non factory air, using factory air controller. Would like the to see if you could also get the sanden sd7 model 7176 mini compressor

02-28-2021, 11:09 PM	#692
Hawkynz Junior Member Join Date: Sep 2017 Location: Newton, AL Posts: 77	Re: Vintage air - huge sale! Hello Matt, Looking to use a Vintage Air in my 1970 GMC non factory air. Using an LS engine with the LS compressor on the passenger side. Looking for a quote please. Thank you James

03-03-2021, 11:24 PM	#694
gpat@earthlink.net Active Member Join Date: Jan 2011 Location: columbia, SC Posts: 156	Re: Vintage air - huge sale! Hey Matt. Need a price on a system for a 72 Blazer. I have converted the dash to an AC dash with the round side vents and center vent. Quote with and with compressor. i do have the original compressor already fitted on engine. Switches to look like original . Firewall has been smoothed out . Thanks Pat.

03-08-2021, 05:29 PM	#696
scf100 Registered User Join Date: Feb 2015 Location: Athens,Ga Posts: 217	Re: Vintage air - huge sale! Matt, need a qoute on Vintage AC setup for a 1970 Chevy 2WD Blazer non AC cab......BBC and auto trans Thanks, Stuart __________________ 1970 2WD Blazer 454 1972 C-10 Extended Cab 350 SBC

03-14-2021, 09:22 AM	#698
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Vintage air - huge sale! Hi Matt, I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is: - '67 cab with factory A/C dash - Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to - I used an early serpentine system and it is setup for an R4 compressor - Compressor is on the passenger side - I do have the outer A/C vents but the center vent outer cover is broken. - Would like to use the Surefit design with the electronic conversion of the factory control - I will need the A/C hoses, and interior ducting for both and A/C and defrost Thanks, Bob __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

03-16-2021, 02:11 PM	#700
Moore87 Registered User Join Date: Dec 2009 Location: Waco, TX Posts: 102	Re: Vintage air - huge sale! Can I get a price on a complete system for a 1971 GMC with factory air? I will also need the R-4 conversion bracket for the compressor. Will also need a 6 rib serpentine pulley on the new compressor instead of the V belt pulley

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.