How about some pics of 67-72 Trucks

[SunTzu]

Tetdoeuf,

Your truck is the most beautiful thing I have ever seen. period. Absolutely perfect.

[Tetdoeuf]

Your truck is the most beautiful thing I have ever seen. period. Absolutely perfect.

Thanks man! Not sure what to say to that..... I'll admit, the paint looks a lot nicer on pictures than from close.

[SynCytyCustoms]

Heres My 70 C10 LWB and My Barn Fresh 69 C30 Longhorn all original 23000 mile untouched

[72 CustomCamper]

I like the Longhorn,but you have to do something with the Ford hubcap. LOL


Chuck

[special-K]

Here`s my dolly queen `71 K/10...

[toomanytoyz]

Look's like a Good Builder, Man i sure do love them Stepper's.................

Rick

[djnutcase]

My grandpa owned this since 1969, I inherited it 9 years ago. It has a PTO winch and is stock except for the saddle tanks and wheels. 327, 4 speed, 4.57 gears (Eaton Rear).

More pics: http://www.squarewavz.com/68chev/

[sodak69c10]

here she is in its 1/4 restored glory:P

[haysonj]

Took it for its first tow did good but need to adjust trailer brakes wants to push truck on panic stops.

[88JRFAN]

LOVE YOUR TRUCK HAYSONJ. LIKE HOW IT MATCHES YOUR BOAT.

[haysonj]

Originally Posted by 88JRFAN

LOVE YOUR TRUCK HAYSONJ. LIKE HOW IT MATCHES YOUR BOAT.

Thanks its been two years in the making and I can finally see the end. Goes back to the paint shop on the 7th for pin strip and detail work then I can put the rest of the chrome on it. Built the the boat in 2003.

[wnc mountain]

I think this may be the first post of my truck since 2002. Not much has changed. Think I have added 2,000 miles and have done a ECE 2/4 drop. Just been gathering parts.

[griesel72]

Originally Posted by wnc mountain

I think this may be the first post of my truck since 2002. Not much has changed. Think I have added 2,000 miles and have done a ECE 2/4 drop. Just been gathering parts.

looks like your kids have nice rides too but i really like your truck

[smartcraig]

Just got it today so here is the link where i bought it , http://www.rustfreeclassics.com/Chev...CST_Orange.htm

[68chevy68]

[ecarrasco06]

My brother just picked this up New years.

[bestacy]

I Have A 1972 Gmc Sierra Grande Swb It Came From The Factory With Every Option Offered By Gm At That Time. I Have Just Completed A Total Restoration. Any Info Would Be Appreciated. Thanks Burt Stacy.

[My72ChevyC10]

Here's a couple of pictures of my 72 Chevy C10.

[slammed1]

I will join in,but still have a lot of work to be road worthy again. I bought it for 300.00 back in 1989-90 and its a 1972 SWB with wooden bed,AC cab,PS,PB,even had the factory chrome rear bumper and from what I could tell had a 350/th350 combo but no engine and tranny when it was purchased by me.

I started cleaning up the truck and getting it ready when I found a buildable 454,so during the clean up process I had some parts in the bed of my brothers truck and one nite he parked it on the street in frt of the house only to find some nice parts like my factory chrome rear bumper and more stolen. I ended up removing the 72 cab in exchange for a $50.00 71 pretty solid non ac cab with typical rusty rockers in better shape.The truck was true 72 until I backed up into it with my jeep and ruined a cherry 72 shell,so I found a 68 entire frt clip for 50.00 and used it on the truck. I ended up getting the 454 built with a 350 tranny and actually on the street when I moved to Tulsa in the mid 90's. After quite a few drag strip passes at the Midnite Drags in Tulsa I spun a rod bearing so the truck sat until around 1994 with a wounded engine.

Moved back to FortSmith and the truck was sitting idle until I built a 408 small block for my street 67 Impala and a 327 for my drag 68 Nova at the same time,after around 2 years of very playful street driving the impala with 4.10's and 3500 10" stall with the 408,I decided to place that engine in the truck with stock stall convertor and open 3.08 gears........talk about fun stepping on the gas at 40 mph and blazin the right rear.

After going through a divorce and selling my 68 Drag Race Nova,I heartedly held on to my truck and started doing some work while trying to keep my sanity. I ended up doing alot of body work,ordered a ECE drop kit and customized it to a 5-8 slam job,and stopped there as it sits in its present day status like the garage pictures show.

This is the truck after 408 installed with home brew drop

These 2 pictures were during the body work stages (notice door handles and cowl scoop)


This next bunch of pictures show its stage after body work partially done,no engine,and as it basically sits today waiting its turn in the garage again.

[Senator350]

here's my new toy.
started life as a C/20. went thru a monster truck phase (hence the clipped front fenders YUCK!) was frame-offed and came to rest as a K/10. it needs some body work... fer sure... but i couldn't pass up the epoxied frame and new wiring harness

currently has a 327 with fuelie heads and 10:1 compression, eddlbrock top end, warm cam, headers... turbo 350...

plans include a NV4500 manual tranny, high pinion 1 ton front, HD dana70 rear, highway gears, big-rig dualies and a flatbed


enuff talk eh?

[bhoeger70]

Here is mine 67lwb currently 2wd but will going on a 72fwd chassis with a 283 and turbo350 even has a posi rear. I might want to change the gears though has 3.07 and would go to 3.73.

[Legend56BC]

This is my 72 Chevy C10 streetstock truck 2007

[Ol'Rover]

Originally Posted by Legend56BC

This is my 72 Chevy C10 streetstock truck 2007

catchin sum tires there eh

yah nice truck!

[Legend56BC]

Found a better shot at the beginning on 2007,we race out of BC @ SunValley Speedway in Vernon and Agassiz out side of Vancouver,streetstock class 355/Auto 373 limited slip comes in @ 3390Lbs with me and a full tank in it.

[Cannon007]

Originally Posted by Legend56BC

Found a better shot at the beginning on 2007,we race out of BC @ SunValley Speedway in Vernon and Agassiz out side of Vancouver,streetstock class 355/Auto 373 limited slip comes in @ 3390Lbs with me and a full tank in it.

Thats Awesome! What did you have to do to get your truck in the 3200lb range?