What Did You Do With Your Truck Today ? - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1956chevtruck · 05-06-2012, 11:40 PM

Quote:

Originally Posted by 1956chevtruck

I think they look amazing! GOD JOB!
Byron

I meant GOOD JOB!

oldcouple · 05-09-2012, 12:32 PM

Got my new gas tank installed. Somehow it just looks wrong.

Amorget · 05-09-2012, 01:00 PM

All you need to finish off the look is a set of "Truck Balls".... just stay out of South Carolina (http://mynorthwest.com/123/673065/An...South-Carolina)

mknittle · 05-09-2012, 04:21 PM

Quote:

Originally Posted by Amorget

All you need to finish off the look is a set of "Truck Balls".... just stay out of South Carolina (http://mynorthwest.com/123/673065/An...South-Carolina)

And Dont' give it any more viagra!

Jesse49chevy · 05-09-2012, 05:30 PM

I want to do something similar to my 48, if you dont mind sharing the info, where did you buy and how much did you spend?
by the way, they look GREAT!!!!

lowdownstar · 05-09-2012, 05:53 PM

i painted my rear fender! This is my first time doing my own body work and paint.

Thanks Ray

mknittle · 05-09-2012, 07:20 PM

Mocked up my rear suspension today once the control arms are in where I want them I will mount the coil overs. That is if I don't decide to do a a trailing arm set up.

mknittle · 05-09-2012, 07:21 PM

Quote:

Originally Posted by lowdownstar

i painted my rear fender! This is my first time doing my own body work and paint.

Thanks Ray

Looks great Ray

mknittle · 05-09-2012, 07:24 PM

Quote:

Originally Posted by oldcouple

Got my new gas tank installed. Somehow it just looks wrong.

Are you going to use a spring ladded licence plate?

lowdownstar · 05-09-2012, 07:51 PM

Quote:

Originally Posted by mknittle

Looks great Ray

Thanks

mknittle · 05-09-2012, 08:26 PM

Quote:

Originally Posted by mknittle

Are you going to use a spring ladded licence plate?

OOPS loaded.

oldcouple · 05-09-2012, 10:34 PM

that look better? 72 nova rear plate bracket.

mknittle · 05-09-2012, 10:41 PM

Quote:

Originally Posted by oldcouple

that look better? 72 nova rear plate bracket.

looks good!

AZ59apacheguy · 05-12-2012, 11:43 AM

Quote:

Originally Posted by Rednek13x

Pulled these much needed parts off of the neighbors parts truck, saved me lots of money! Going to clean them up and get them working!

Don't forget to get remove from that loaner truck the adapter plate that mounts to the side wall of the inner cab. This adapter plate joins the blower fan ( via a wide rubber sleeve ) to fresh outside air:

oldcouple · 05-15-2012, 01:51 PM

Got my tailgate straps finished.

OrrieG · 05-15-2012, 04:02 PM

Nothing, but found this old Chevy grille (probably 29-31 based on what he had as a kid) in my Dad's storage container. Also brought back two boxes of old hub caps (some AD) and saw an old gas pump buried in the back.

**Dan in Pasadena** · 05-15-2012, 04:08 PM

Quote:

Originally Posted by lowdownstar

i painted my rear fender! This is my first time doing my own body work and paint.

Thanks Ray

Looks pretty damned good in the photo. Does it look that flawless in person? If so, you might just have a future as a painter, huh?

Is it satin or are you clear coating it?

lowdownstar · 05-15-2012, 04:58 PM

Quote:

Originally Posted by Dan in Pasadena

Looks pretty damned good in the photo. Does it look that flawless in person? If so, you might just have a future as a painter, huh?

Is it satin or are you clear coating it?

Thanks, and yes it looks even better in person! Even better now it's on the truck.lol
it's going to stay satin, i hope to do the rest of the truck and maybe some day down the road i'll put some color on her. Thanks for the job offer but it would cost me money to do body work for a living. lol Don't get me wrong i love how nice it came out but it took me ten times the amount of time to get it right... lol

Thanks Ray

mknittle · 05-15-2012, 08:57 PM

Quote:

Originally Posted by lowdownstar

Thanks, and yes it looks even better in person! Even better now it's on the truck.lol
it's going to stay satin, i hope to do the rest of the truck and maybe some day down the road i'll put some color on her. Thanks for the job offer but it would cost me money to do body work for a living. lol Don't get me wrong i love how nice it came out but it took me ten times the amount of time to get it right... lol

Thanks Ray

I like the satin black. you spend less time polishing and more time having fun with your truck.
looks great Ray!

mknittle · 05-15-2012, 08:59 PM

Iworked on cleaning up my frame where the suspension X-member goes. I would like to weld it in tomorrow. If the wind dies down that is.

KnucklebustinK · 05-15-2012, 09:04 PM

About to change the oil and use 20/ 50 to see if oil pressure comes up.. if not I have a new pump on standby. Waiting on the sun to go down, it was 105F outside

Rednek13x · 05-15-2012, 09:16 PM

Quote:

Originally Posted by AZ59apacheguy

Don't forget to get remove from that loaner truck the adapter plate that mounts to the side wall of the inner cab. This adapter plate joins the blower fan ( via a wide rubber sleeve ) to fresh outside air:

I should have that on my truck already as it has the blower fan assembly

_Ogre · 05-15-2012, 09:23 PM

drove mine

**G&R's57GMC** · 05-15-2012, 10:51 PM

Walked by mine

danheit · 05-16-2012, 06:51 AM

Ha! Finally had the transporter come get mine and take it to it's new owner. Now to start on my new 55 project......

05-09-2012, 12:32 PM	#702
oldcouple Registered User Join Date: Nov 2011 Location: Winlock Wa Posts: 584	Re: What Did You Do With Your Truck Today ? Got my new gas tank installed. Somehow it just looks wrong. Attached Images __________________ Retired and too busy to work.

05-09-2012, 01:00 PM	#703
Amorget Registered User Join Date: Feb 2012 Location: Camano Island, WA Posts: 166	Re: What Did You Do With Your Truck Today ? All you need to finish off the look is a set of "Truck Balls".... just stay out of South Carolina (http://mynorthwest.com/123/673065/An...South-Carolina)

05-09-2012, 05:30 PM	#705
Jesse49chevy Registered User Join Date: May 2012 Location: Houston Posts: 462	Re: What Did You Do With Your Truck Today ? I want to do something similar to my 48, if you dont mind sharing the info, where did you buy and how much did you spend? by the way, they look GREAT!!!! __________________ Semper Fi Check out my project: http://67-72chevytrucks.com/vboard/s...d.php?t=559086

05-09-2012, 05:53 PM	#706
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: What Did You Do With Your Truck Today ? i painted my rear fender! This is my first time doing my own body work and paint. Thanks Ray Attached Images

05-09-2012, 07:20 PM	#707
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? Mocked up my rear suspension today once the control arms are in where I want them I will mount the coil overs. That is if I don't decide to do a a trailing arm set up. Attached Images __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

05-09-2012, 10:34 PM	#712
oldcouple Registered User Join Date: Nov 2011 Location: Winlock Wa Posts: 584	Re: What Did You Do With Your Truck Today ? that look better? 72 nova rear plate bracket. Attached Images __________________ Retired and too busy to work.

05-15-2012, 01:51 PM	#715
oldcouple Registered User Join Date: Nov 2011 Location: Winlock Wa Posts: 584	Re: What Did You Do With Your Truck Today ? Got my tailgate straps finished. Attached Images __________________ Retired and too busy to work.

05-15-2012, 04:02 PM	#716
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What Did You Do With Your Truck Today ? Nothing, but found this old Chevy grille (probably 29-31 based on what he had as a kid) in my Dad's storage container. Also brought back two boxes of old hub caps (some AD) and saw an old gas pump buried in the back. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

05-15-2012, 08:59 PM	#720
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? Iworked on cleaning up my frame where the suspension X-member goes. I would like to weld it in tomorrow. If the wind dies down that is. __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

05-15-2012, 09:04 PM	#721
KnucklebustinK Registered User Join Date: May 2012 Location: Yuma, AZ Posts: 3	Re: What Did You Do With Your Truck Today ? About to change the oil and use 20/ 50 to see if oil pressure comes up.. if not I have a new pump on standby. Waiting on the sun to go down, it was 105F outside Attached Images

05-15-2012, 09:23 PM	#723
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: What Did You Do With Your Truck Today ? drove mine __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

05-15-2012, 10:51 PM	#724
G&R's57GMC Senior Member Join Date: Aug 2010 Location: Shasta Lake, CA. Posts: 1,624	Re: What Did You Do With Your Truck Today ? Walked by mine

05-16-2012, 06:51 AM	#725
danheit Registered User Join Date: Aug 2011 Location: Little River, SC Posts: 255	Re: What Did You Do With Your Truck Today ? Ha! Finally had the transporter come get mine and take it to it's new owner. Now to start on my new 55 project......

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.