What did you do to your truck today? - Page 297 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCHRUMGMC · 04-13-2013, 07:14 PM

Same as always, waiting to get my Truck

Losing my Patience

jbgroby · 04-13-2013, 08:16 PM

My new favorite song is

Carly Simon - Anticipation (Original) 1971 HQ -...

SCHRUMGMC · 04-13-2013, 08:31 PM

Everyone's theme song when their Projects about DONE

Europe - The Final Countdown - YouTube

Trsmotrhed · 04-13-2013, 09:43 PM

Started off the day with a doughnut from voodoo doughnuts I brought back from Portland. Than finished stripping the paint off the bed to get ready for epoxy primer. Need to finish the other side tomorrow.

Posted via Mobile Device

SCHRUMGMC · 04-13-2013, 09:46 PM

The Doughnut doesn't look like Krispy Kreme ..How dare you !!

dantimdad · 04-13-2013, 10:12 PM

Do you mean finish the other side of the bed or the other side of the donut?

Steven

**PORKY** · 04-14-2013, 12:22 AM

We got the inside painted today. It was like painting inside your pocket.
Glad that part is done.

donthekawguy · 04-14-2013, 01:17 AM

Quote:

Originally Posted by Trsmotrhed

Started off the day with a doughnut from voodoo doughnuts I brought back from Portland. Than finished stripping the paint off the bed to get ready for epoxy primer. Need to finish the other side tomorrow.

Posted via Mobile Device

MMMMMMM Voodoo doughnuts! I love that place. My mom lives in Portland and she brings me some every time she comes up here. I love the bacon maple bars!

donthekawguy · 04-14-2013, 01:20 AM

I got what was left of the rear springs off without breaking any bolts! I tried once again to get the trailing arm bolts loose with no luck. Then it started to snow so I packed up and went inside.

LT1 Burb · 04-14-2013, 02:36 AM

Quote:

Originally Posted by Trsmotrhed

Started off the day with a doughnut from voodoo doughnuts I brought back from Portland. Than finished stripping the paint off the bed to get ready for epoxy primer. Need to finish the other side tomorrow.

Posted via Mobile Device

That bedside looks like new, very nice. I have yet to try one of those donuts.

SCHRUMGMC · 04-14-2013, 02:37 AM

That made me laugh Burb

Trsmotrhed · 04-14-2013, 03:09 AM

Quote:

Originally Posted by dantimdad

Do you mean finish the other side of the bed or the other side of the donut?

Steven

Both, those donuts are huge and good.

Posted via Mobile Device

MrBeast · 04-14-2013, 03:32 AM

72 Chevy Cummins Project Update - April 2013 -...

Dano0579 · 04-14-2013, 12:11 PM

Striped paint and rust from inside passenger door panel. Getting it ready for a little bit of primer.

akaupp · 04-14-2013, 02:03 PM

Yesterday I picked up a few parts for the truck, namely inner fenders, loaded doors, core support, hood hinges, and battery tray.

I also got the rear bumper ready to install

I painted the headlight bezels and push bar. I put them on to see how they would look.

Last, but not least, I installed my hat holder

SCHRUMGMC · 04-14-2013, 02:10 PM

Nice truck man

dantimdad · 04-14-2013, 02:46 PM

Started cutting up the SWB frame into a cab dolly. Took a rear cross member and welded it in the front of the frame just in front of the fire wall to stabilize it.

Ran out of cutting wheels.

Should have a rolling dolly one night this week.

Steven

SCHRUMGMC · 04-14-2013, 02:57 PM

Sounds like a plan man, post photos when you get done

tincan1966 · 04-14-2013, 06:30 PM

For the weekend on the '65 LWB Daily Driver:

Got power steering adapter bracket made and new PS box mounted up.
Made a power brake booster bracket and got booster painted and mounted.
Modified brake pedal by cutting the clutch pedal off and welding it to the brake pedal, after cutting the arm off 2" below the booster rod. This kicks the pedal pad about 2 1/2" to the driver's side so not so close to the gas pedal. Looks a little more proportional to me.
Was nice to finally work in the shop two days in a row. Hope to get to exhaust shop by weeks end.

Steering column is out, going to build one out of 3 parts columns

Blainethemono · 04-14-2013, 10:46 PM

I finally did the switch to an internally regulated altenator. Did the 1984 Trans Am 305 4bbl HO rebuild from O'Really?

So nice to see 14.15 volts across the battery again.....

Trsmotrhed · 04-14-2013, 10:50 PM

Quote:

Originally Posted by Blainethemono

I finally did the switch to an internally regulated altenator. Did the 1984 Trans Am 305 4bbl HO rebuild from O'Really?

So nice to see 14.15 volts across the battery again.....

Thats a great alternator to use. Same one I used when I did my setup.
Posted via Mobile Device

cb1965 · 04-14-2013, 10:51 PM

Tuned my carburetor and put a new fan shroud.. runs great now!!!

SCHRUMGMC · 04-14-2013, 10:53 PM

Planned more plans for it

gofastnut · 04-15-2013, 12:37 AM

Quote:

Originally Posted by Trsmotrhed

Started off the day with a doughnut from voodoo doughnuts I brought back from Portland.

Mmmmmmm, Voodoo donuts!! Man, those are good. I got to have six, er, I mean 1 or 2 when I was up there for a trade show last year.
They have an, um, "interesting" menu....

**Got the carb cleaned, rebuilt and back on today. Had just enough time to take it the 5 blocks to Mom & Dad's for a few before it got too dark to drive, I have no lights at the moment**

MrBeast · 04-15-2013, 12:38 AM

Quote:

Originally Posted by PORKY

We got the inside painted today. It was like painting inside your pocket.
Glad that part is done.

Love that color!

04-13-2013, 07:14 PM	#7401
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Same as always, waiting to get my Truck Losing my Patience __________________ 1971 GMC Sierra 1959 GMC 100

04-13-2013, 09:43 PM	#7404
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: What did you do to your truck today? Started off the day with a doughnut from voodoo doughnuts I brought back from Portland. Than finished stripping the paint off the bed to get ready for epoxy primer. Need to finish the other side tomorrow. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

04-13-2013, 09:46 PM	#7405
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? The Doughnut doesn't look like Krispy Kreme ..How dare you !! __________________ 1971 GMC Sierra 1959 GMC 100

04-13-2013, 10:12 PM	#7406
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Do you mean finish the other side of the bed or the other side of the donut? Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

04-14-2013, 12:22 AM	#7407
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: What did you do to your truck today? We got the inside painted today. It was like painting inside your pocket. Glad that part is done. Attached Images

04-14-2013, 01:20 AM	#7409
donthekawguy Registered User Join Date: Aug 2012 Location: Rathdrum ID Posts: 1,129	Re: What did you do to your truck today? I got what was left of the rear springs off without breaking any bolts! I tried once again to get the trailing arm bolts loose with no luck. Then it started to snow so I packed up and went inside. __________________ 66 shorty

04-14-2013, 02:37 AM	#7411
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? That made me laugh Burb __________________ 1971 GMC Sierra 1959 GMC 100

04-14-2013, 12:11 PM	#7414
Dano0579 Registered User Join Date: Feb 2013 Location: Eldridge, Alabama Posts: 105	Re: What did you do to your truck today? Striped paint and rust from inside passenger door panel. Getting it ready for a little bit of primer. Attached Images __________________ Current project (My Maria) 62 Chevrolet LWB stepside 235 inline 6 cylinder http://67-72chevytrucks.com/vboard/s...d.php?t=569873 Dano

04-14-2013, 02:03 PM	#7415
akaupp Registered User Join Date: Jan 2013 Location: West Point, UT Posts: 235	Re: What did you do to your truck today? Yesterday I picked up a few parts for the truck, namely inner fenders, loaded doors, core support, hood hinges, and battery tray. I also got the rear bumper ready to install I painted the headlight bezels and push bar. I put them on to see how they would look. Last, but not least, I installed my hat holder __________________ Aaron 1964 K10 1964 C10 1965 Suburban 2005 Yukon

04-14-2013, 02:10 PM	#7416
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Nice truck man __________________ 1971 GMC Sierra 1959 GMC 100

04-14-2013, 02:46 PM	#7417
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Started cutting up the SWB frame into a cab dolly. Took a rear cross member and welded it in the front of the frame just in front of the fire wall to stabilize it. Ran out of cutting wheels. Should have a rolling dolly one night this week. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

04-14-2013, 02:57 PM	#7418
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Sounds like a plan man, post photos when you get done __________________ 1971 GMC Sierra 1959 GMC 100

04-14-2013, 06:30 PM	#7419
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today? For the weekend on the '65 LWB Daily Driver: Got power steering adapter bracket made and new PS box mounted up. Made a power brake booster bracket and got booster painted and mounted. Modified brake pedal by cutting the clutch pedal off and welding it to the brake pedal, after cutting the arm off 2" below the booster rod. This kicks the pedal pad about 2 1/2" to the driver's side so not so close to the gas pedal. Looks a little more proportional to me. Was nice to finally work in the shop two days in a row. Hope to get to exhaust shop by weeks end. Steering column is out, going to build one out of 3 parts columns

04-14-2013, 10:46 PM	#7420
Blainethemono Registered User Join Date: Mar 2011 Location: Seattle, Wa. Posts: 14	Re: What did you do to your truck today? I finally did the switch to an internally regulated altenator. Did the 1984 Trans Am 305 4bbl HO rebuild from O'Really? So nice to see 14.15 volts across the battery again.....

04-14-2013, 10:51 PM	#7422
cb1965 Registered User Join Date: Mar 2010 Location: san jose, california Posts: 508	Re: What did you do to your truck today? Tuned my carburetor and put a new fan shroud.. runs great now!!! __________________ '66 chevy lwb c10 '65 chevy lwb c20



Register or Log In To remove these advertisements.

04-14-2013, 10:53 PM	#7423
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today? Planned more plans for it __________________ 1971 GMC Sierra 1959 GMC 100

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.