Can you please post pics of your lowered '67-72?

[bryanw1968]

Early Classic springs front and rear. Went to front disc brakes w/stock spindles. The front springs were 2" drop and the back was 4".

Tires: front 245/60/15 back 295/50/15

[DJ72CHEVY]

66skylarkpost how do you like the 455? Is it warmed up any? I am putting one in my 72 also. Nice to see it fits ok.

[Bishops Trucks]

4 1/2" front and 5" back. Truck is in pieces now getting a frameoff and 4-way airbag system.

[66skylarkpost]

Originally Posted by DJ72CHEVY

66skylarkpost how do you like the 455? Is it warmed up any? I am putting one in my 72 also. Nice to see it fits ok.

hello , its all 8.5:1 stock except for the intake , oil pump kit , accell worked hei ,and a holley carb with around a 100,000 miles from a riviera . runs good . fun to drive ,yet it could use a rebuild . ive got buicks in the blood and where id rather have put in one of my earlier better headed motors , this one was just goin to be laying around if i didnt do something with it . it would be alot quiker with a 400 turbo , where the ratios are off and syncros of that truck 4speed are a pain . i put a number of pics of the build up over on v8buick.com in the wrenchin secrets http://www.v8buick.com/showthread.php?t=91232 you should be able to use your same id there that you use here

[pat]

4.5/5 drop
2.5" spindles and 2" springs up front, 3" springs and 2" block in the back.
245/50/17 front, 255/50/17 back
not the best picture...

[PunkRock247]

4/6 ECE Drop

Tires
255/60/15 Front
275/60/15 Rear

[71see10]

2 1/2 drop spindles
5" drop rear springs
Gives a more level look!!!
I love pictures!!

[68GMC454]

so if i go with a 4/6 drop,,will i need new front spindels...for now im just gonna cu the front coils,,plus after i change the rear leafs out for a older chevy rear set up...faster than a 4 link,,and fits my budget...so rear coils will get cut to more than likely..

[see ten]

It's 3.5 front and 6 in the back.

[prin]

[bodydropped68]

i have a 10/14 drop, air bags front/rear 4 link with a 2 1/2 stock floor bodydrop. 245/40/20 front 285/50/20 rear

[prostreet1967]

nice truck bodydroped68

[action]

I am pretty sure you can't cut the rear coils.
Jack

[1LoC10]

Originally Posted by bodydropped68

i have a 10/14 drop, air bags front/rear 4 link with a 2 1/2 stock floor bodydrop. 245/40/20 front 285/50/20 rear

any other shots of your truck.. how close is that 285/50 to the top of the bed? awesome looking truck by the way

[powell72]

4/6, 245/60's, 275/60's, 6.5'' and 8'' rallys, the usual.

[bodydropped68]

thanks alot prostreet1967.

[bodydropped68]

with the truck laid out the tyre would touch the lip of the bed rail,so when i raised the bed floor i cut the lip so the stock widend and shortend wheel tubs sit flush with the bottom of the bad rail,so now it clears the tyre buy a 1/2 inch.thanks for the interest 1loc10

[bskylerj]

2" drop spindles and bagged with 20" wheels

[Kenneth_CS87]

Originally Posted by bodydropped68

i have a 10/14 drop, air bags front/rear 4 link with a 2 1/2 stock floor bodydrop. 245/40/20 front 285/50/20 rear

Have any rear pics of your rear air ride setup?

[socal67chevy]

here's mine with a CPP 4/6 drop

[steveo10]

heres my bedless beast
if anyone has a solid pass. side bedside around indiana let me know.
sorry for the huge pic

[RamThis]

Holy cow some of you guys have awesome rigs!! Makes me wanna get my 68 Stepside loaded up and start doing bodywork!!!! Great pics!!!

[1lowdiesel]

[1LoC10]

loving the KMC Venoms done up in all black, that looks great...... heres my old truckfrom 6 years ago, I love those wheels

[sixty8c10]

Alot of nice trucks here can't wait for mine to join in here, I can give an in progress link though:
http://67-72chevytrucks.com/vboard/s...d.php?t=188766