Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mt Man Chad · 04-24-2007, 03:28 PM

I would be interested in the setup also, if any more show up!

smbrouss70 · 04-24-2007, 03:37 PM

Me Too! Me Too!

**PICKMUP** · 04-24-2007, 10:37 PM

I'm still working on the special order...I may be able to get them shipped in air freight...I'll let you know.
Thanks again,
Frank

msgross · 04-24-2007, 11:29 PM

Thanks Frank..

**Canadian694x4** · 05-04-2007, 09:53 AM

Received Mine Today. Thanks Frank! Pleasure Doing Business, Left Ya Some Rep Too.

dan42 · 05-05-2007, 11:41 AM

Frank - do they work with A/C on the Passenger side? Do you have any more?

msgross · 05-05-2007, 06:20 PM

any updates Frank?

**PICKMUP** · 05-05-2007, 10:51 PM

They are coming---for sure! and should be pretty soon. I got an update this week that our order was being processed, but no firm date. I am guessing two weeks +.
Will they work with AC? Well they are the same GM ramhorn bolt pattern and our trucks did come with straight down rams (4x4 & 4spd), so take a good look at the pics and see if there are any problems.

dan42 · 05-06-2007, 01:50 AM

Thanks Frank. Do you know anything about the dependability of the mini starters? I'm wondering if they're similar in durability to the full size starters.

RACINJASON22 · 05-21-2007, 12:45 AM

bump

Mt Man Chad · 06-19-2007, 12:40 PM

TTT Update?

**PICKMUP** · 06-21-2007, 11:38 PM

I give up...again! There may not be any more of these, at this price, anyway.
The manufacturer says they can't do another production run at this price and the buyer for the distributor will not pay more...at this time.
Here is what we are doing to use the remaining RH manifolds that are still available.
Remove the 5/16 tube by punching it out or drilling both ends and then just tapping it for 1/8" pipe thread allen plug...Like they do on the air pump holes on all aftermarket ramhorns.
...OR you can weld up the holes. I still like to countersink the allen plugs about 1/4" so there is a bottom in the hole to weld to.
These manifolds are the same price as the other side. $130shipped w/gaskets & studs. I can supply 2.5 mandrel bent pipes for $50 pr (these will not have flanged ends--just pipes). See the first pic.
I won't have time to do any more of the fully prepped sets, so it is a "Do It Yourself" project from here on.
There are a few sets left, so post on here if you would like to order some of these.

**jaros44sr** · 06-22-2007, 06:16 AM

Frank, put me in line for a set. The 130 covers a set? RH and LH is the same? J.

**PICKMUP** · 06-22-2007, 11:24 AM

Yes, $130 is for a pair, w/gaskets & studs and shipping included.
You can PM me for PayPal/MC/VISA or other payments arrangements.

**jaros44sr** · 06-22-2007, 05:01 PM

Quote:

Originally Posted by PICKMUP

Yes, $130 is for a pair, w/gaskets & studs and shipping included.
You can PM me for PayPal/MC/VISA or other payments arrangements.

Let me clear my PM box and send something off. J.

**jaros44sr** · 06-22-2007, 05:48 PM

Thanks Frank, always a pleasure doing business with you. J.

eric72 · 06-22-2007, 11:06 PM

put me in line also.

Thanks

**jaros44sr** · 07-02-2007, 05:48 PM

Money is on the way, as soon as I get the addy... J.

HOTFUN · 07-02-2007, 11:46 PM

Frank. I will take a set. Please advise if you still have two with the holes and I will Paypal the money right away. Thanks, Mark

**PICKMUP** · 07-03-2007, 11:44 AM

Yes,
We do still have a few of the manifolds with the small heat tube holes...and they will ship out right away. We just got a few more sets of mandrell bent pipes in also...
Thanks, Frank

HOTFUN · 07-03-2007, 04:25 PM

Frank
Payment sent via Paypal. Thanks, Mark

Americanrider · 07-04-2007, 03:16 AM

Hey Frank, what is the price for local pickup of a pair of RH's?

**PICKMUP** · 07-04-2007, 03:21 PM

Same price shipped to you or shipped here to me...

**PICKMUP** · 07-12-2007, 11:38 AM

They are just about gone! There are only a couple sets left now and we still aren't getting any answers or encouragement on additional production runs or other manufacturers to make more in this price range.
You may be able to get some Dorman brand similar manifolds through some of the larger auto parts stores.
Again, don't send any $$$ until you post here and let me make sure we still have a set left.
Thanks...Boy we sold a ton of these!!!

**jaros44sr** · 07-12-2007, 06:48 PM

Just curious, did mine ship yet. Can't wait to hook 'em up. Thanks J.

04-24-2007, 03:28 PM	#51
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD I would be interested in the setup also, if any more show up! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-24-2007, 03:37 PM	#52
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Me Too! Me Too! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

04-24-2007, 10:37 PM	#53
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD I'm still working on the special order...I may be able to get them shipped in air freight...I'll let you know. Thanks again, Frank

04-24-2007, 11:29 PM	#54
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Thanks Frank.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

05-04-2007, 09:53 AM	#55
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Received Mine Today. Thanks Frank! Pleasure Doing Business, Left Ya Some Rep Too. __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

05-05-2007, 11:41 AM	#56
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Frank - do they work with A/C on the Passenger side? Do you have any more? __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

05-05-2007, 06:20 PM	#57
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD any updates Frank? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

05-05-2007, 10:51 PM	#58
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD They are coming---for sure! and should be pretty soon. I got an update this week that our order was being processed, but no firm date. I am guessing two weeks +. Will they work with AC? Well they are the same GM ramhorn bolt pattern and our trucks did come with straight down rams (4x4 & 4spd), so take a good look at the pics and see if there are any problems.

05-06-2007, 01:50 AM	#59
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Thanks Frank. Do you know anything about the dependability of the mini starters? I'm wondering if they're similar in durability to the full size starters. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

05-21-2007, 12:45 AM	#60
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD bump __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

06-19-2007, 12:40 PM	#61
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD TTT Update?

06-21-2007, 11:38 PM	#62
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD I give up...again! There may not be any more of these, at this price, anyway. The manufacturer says they can't do another production run at this price and the buyer for the distributor will not pay more...at this time. Here is what we are doing to use the remaining RH manifolds that are still available. Remove the 5/16 tube by punching it out or drilling both ends and then just tapping it for 1/8" pipe thread allen plug...Like they do on the air pump holes on all aftermarket ramhorns. ...OR you can weld up the holes. I still like to countersink the allen plugs about 1/4" so there is a bottom in the hole to weld to. These manifolds are the same price as the other side. $130shipped w/gaskets & studs. I can supply 2.5 mandrel bent pipes for $50 pr (these will not have flanged ends--just pipes). See the first pic. I won't have time to do any more of the fully prepped sets, so it is a "Do It Yourself" project from here on. There are a few sets left, so post on here if you would like to order some of these. Attached Images

06-22-2007, 06:16 AM	#63
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Frank, put me in line for a set. The 130 covers a set? RH and LH is the same? J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-22-2007, 11:24 AM	#64
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Yes, $130 is for a pair, w/gaskets & studs and shipping included. You can PM me for PayPal/MC/VISA or other payments arrangements.

06-22-2007, 05:48 PM	#66
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Thanks Frank, always a pleasure doing business with you. J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

06-22-2007, 11:06 PM	#67
eric72 Registered User Join Date: Dec 2003 Location: georgia Posts: 212	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD put me in line also. Thanks

07-02-2007, 05:48 PM	#68
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Money is on the way, as soon as I get the addy... J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-02-2007, 11:46 PM	#69
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Frank. I will take a set. Please advise if you still have two with the holes and I will Paypal the money right away. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

07-03-2007, 11:44 AM	#70
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Yes, We do still have a few of the manifolds with the small heat tube holes...and they will ship out right away. We just got a few more sets of mandrell bent pipes in also... Thanks, Frank

07-03-2007, 04:25 PM	#71
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Frank Payment sent via Paypal. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

07-04-2007, 03:16 AM	#72
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Hey Frank, what is the price for local pickup of a pair of RH's?

07-04-2007, 03:21 PM	#73
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Same price shipped to you or shipped here to me...

07-12-2007, 11:38 AM	#74
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD They are just about gone! There are only a couple sets left now and we still aren't getting any answers or encouragement on additional production runs or other manufacturers to make more in this price range. You may be able to get some Dorman brand similar manifolds through some of the larger auto parts stores. Again, don't send any $$$ until you post here and let me make sure we still have a set left. Thanks...Boy we sold a ton of these!!!

07-12-2007, 06:48 PM	#75
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Just curious, did mine ship yet. Can't wait to hook 'em up. Thanks J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.