Parts Yard Meets Metal Dumpster

[-Greg72]

Originally Posted by vtblazer

Your (I believe) 3rd in line for a set of inners, wiring harness sounds doable.

When's the panel going to wanna head your way?

Soon!!! .... I need some electrical help in the new ManSpace. How's next weekend sound (Aug 4/5)???

[vtblazer]

Originally Posted by hgs_notes

I would like the black middle seat belt set and how much for those sport mirrors?

I'm also looking for a rebuildable 4 barrel carb, preferably a spreadbore. I'm not too particular on brand, as long as it is useable. Got any HEI distributors laying around? How about tranny coolers?

Mike

Sport mirrors. $30.00 shipped.

Found a 'couple' carbs for ya.
Have a favorite Q-jet number? Take your pick, have several of those.
From nasty looking to nice, all pretty complete though.
Shipping cost only for the nasty one, up to
$75.00 shipped for the nice one. (Q-jets)

One Holley 600cfm vac secondary. $50.00 shipped.
One Edelbrock. $60.00 shipped.
One old Carter. $40.00 shipped
One nice Carter 750cfm AFB Competition Series. $260.00 shipped.

No extra dizzy's but the pile is deep, so stay tuned.

No remote tranny coolers.

[vtblazer]

Originally Posted by TooMany2count

I'm about broke but I need a steering column for an automatic(68chevy) & I don't care if its a tilt or not, what kinda deal will you give w/shipping to 62206....joe

Only have one in the yard but popped my head into the garage attic and found three more.

$75.00 shipped sound reasonable?

[vtblazer]

Originally Posted by 1970bowtie

i need a good grille will take 69/70 71/72 shipped to 75754 thanks

Nothing great for the 69/70 but have a couple for 71/72.

You looking for "really nice" or just driver?

[vtblazer]

Originally Posted by Ridgeback

If you end up parting the suburban and the hubcaps are decent I would be interested. Thanks.

Sorry old pic.
Hub caps have been sold already.

[vtblazer]

Originally Posted by Tri-ProAutomotive

how much for the dash?

I also need a power steering pump and bracket...mine's "Zip-Tied" to the frame

The A/C dash?
How/where would you like it cut?
Complete or cut under the pad?

Believe there's a good bracket around. $20.00 shipped

[vtblazer]

Originally Posted by c-1072

got a good blazer windshield frame or any other parts of interest for a blazer my cousin is coming up for a visit he lives near ya .are you still lookin for a short bed ? i got a driver one here might give me an excuse to come see ya .Take it easy
Todd

No 'good' windshield frames.

Could use the short bed.

What ever happened to the front clip we were talking about awhile back?

[vtblazer]

Originally Posted by rlm316

Do you have another gear indicator for the '69-'72 non-tilt auto column. Thanks, Lane.

Yes - $30.00 shipped

[Chevyman63]

Is the Burb still for sale? I may be interested.

[vtblazer]

Originally Posted by Chevyman63

Is the Burb still for sale? I may be interested.

Yes sir, how can I help?

[Chevyman63]

Just mapquested the trip out there...wow, that's quite a drive! I could use most of the front clip for my Blazer and Jojotonka, as far as I know would be interested in the axles...sooooo. I hate to pull apart that beauty, but you gotta do what you gotta do. I'll bet we could pile a lot of extra parts in the back of that baby too for any members close to me who are looking for parts. Need to ponder this one.
I guess I'm saying put me in line. I'll let you know after I talk to Joe.
Thanks.

[hgs_notes]

Originally Posted by vtblazer

Sport mirrors. $30.00 shipped.

Found a 'couple' carbs for ya.
Have a favorite Q-jet number? Take your pick, have several of those.
From nasty looking to nice, all pretty complete though.
Shipping cost only for the nasty one, up to
$75.00 shipped for the nice one. (Q-jets)

One Holley 600cfm vac secondary. $50.00 shipped.
One Edelbrock. $60.00 shipped.
One old Carter. $40.00 shipped
One nice Carter 750cfm AFB Competition Series. $260.00 shipped.

No extra dizzy's but the pile is deep, so stay tuned.

No remote tranny coolers.

I'll take the mirrors and a carb. Here's what I'm looking for in a carb, complete with linkages, etc. nothing missing, choke assembly preferably electric, preferably manual secondaries and spreadbore mounting. Find me the cheapest thing you got that meets that and throw it in the box with those mirrors. Let me know how you want payment and it's done.

Mike

[vtblazer]

Originally Posted by Chevyman63

Just mapquested the trip out there...wow, that's quite a drive! I could use most of the front clip for my Blazer and Jojotonka, as far as I know would be interested in the axles...sooooo. I hate to pull apart that beauty, but you gotta do what you gotta do. I'll bet we could pile a lot of extra parts in the back of that baby too for any members close to me who are looking for parts. Need to ponder this one.
I guess I'm saying put me in line. I'll let you know after I talk to Joe.
Thanks.

It's a parts truck in all reality and the more parts that get used, the better.

How far does map quest tell ya?
I've done Traverse City in 12 hours before.

Always willing to help with the distance thing.
Maybe a board member lives half way where we could meet up and swap.

Your in the front row at this point, 2nd person to show/say "interested" so it's your call.

[vtblazer]

Originally Posted by hgs_notes

I'll take the mirrors and a carb. Here's what I'm looking for in a carb, complete with linkages, etc. nothing missing, choke assembly preferably electric, preferably manual secondaries and spreadbore mounting. Find me the cheapest thing you got that meets that and throw it in the box with those mirrors. Let me know how you want payment and it's done.

Mike

Okay, I'll 'fill the bill' and pm you with a total.
Thanks.

[02_GMC_97_FIII]

Will take the "TH-350 cover - $15.00 shipped". Am looking for a 67/68 front bumper so will pass on the bumper. Also would you happen to have a set of '72 longer style door latch controls?

Thanks-
Matt

[vtblazer]

Originally Posted by 02_GMC_97_FIII

Will take the "TH-350 cover - $15.00 shipped". Am looking for a 67/68 front bumper so will pass on the bumper. Also would you happen to have a set of '72 longer style door latch controls?

Thanks-
Matt

Okay,
Postal money order, will pm you my addy, thanks.

I'll have to check for the latches but chances are slim.

[Thealien]

Just want to make sure I am not forgotten, as I said I am in no rush.

[vtblazer]

Originally Posted by Thealien

I now only need passenger side A/C vent and controls if you have

Cut down doors are OK if they have no rust, my doors are rust free but PO welded up the window frame.

Jack stuff

I am going to carlisle next weekend but could come up to pick stuff up the next week or weekend after if you/I can reach an agreement.

Thanks, I am not in a rush
Mark

Nothing for good A/C controls and the truck with the A/C dash, doesn't have the A/C vents.

Anything more I could do for ya?

[Thealien]

The jack, handle, and lug wrench

And how much for a gas tank filler tube, the one soldered onto the gas tank?

[hgs_notes]

Originally Posted by vtblazer

Okay, I'll 'fill the bill' and pm you with a total.
Thanks.

I almost forgot, the black seat belts including middles. And blazer rear seat belts if you got'em.

[sandking]

Do you still have a complete '72 grill? If so, would you ship to Ca? Or, I have a nice '70 grill if someone wants to trade for their '72. Thanks, Joey

[scrapmetalart]

I need a 4 blade fan for a 6 cyl...

[72K5Blazer4x4]

Got an rear glass for a 72 blazer, have the frame but no glass. Also need door locks, visors and hardware, a shift knob for the 4X4 (per one with the postion markings). Interested in the burb if no other takers.

[1969k10stepside]

In attempt to put the 71 shortbed together...I need 71-72 4wd front outer bumper brackets,4wd auto tranny linkages,and maybe a front driveshaft for a np205 equipped 4wd..have any of these?

[vtblazer]

I have alot of the parts recently asked about.

Give me a day or two to regroup and answer all the replies please, thanks.