parting 70 chevy truck now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69sixpackbee · 01-07-2008, 08:42 AM

Randy,
Do you have any medium (olive?) green defrost vents?
Thanx,
Bud

teeitup · 01-07-2008, 09:06 AM

Bernie, it will go out Mon
Bud, I don't think so, but I'll look
Thanks Randy

**88JRFAN** · 01-08-2008, 07:01 PM

Hey Randy, What Kind Of Shape Is The Bed Floor And The Rear Cross Member. Thanks Daren

teeitup · 01-09-2008, 03:30 AM

Daren, I'll have to clean it out and see, its got alot of trash in it, I'll try in the next couple evenings to get it cleaned out. Thanks Randy

**bigdon-70blazer** · 01-09-2008, 04:32 AM

How much for headlight bezels for the 70?

teeitup · 01-09-2008, 03:16 PM

bigdon, I need to look and see what I have out there. I will Tues after work. Thanks Randy

**88JRFAN** · 01-09-2008, 06:28 PM

Quote:

Originally Posted by teeitup

Daren, I'll have to clean it out and see, its got alot of trash in it, I'll try in the next couple evenings to get it cleaned out. Thanks Randy

SOUNDS GOOD, THANKS DAREN

**bigdon-70blazer** · 01-10-2008, 03:10 AM

Thanks!

teeitup · 01-10-2008, 01:30 PM

69 1/2 6 pack bee, sorry none out there
88jrfan, bed floor is toast
bigdon, I got one set out there $18 shipped
Thanks Randy

69sixpackbee · 01-10-2008, 02:00 PM

thanx for checking, Randy

**bigdon-70blazer** · 01-10-2008, 02:46 PM

I'll take them! You take pay pal right?

**88JRFAN** · 01-10-2008, 02:52 PM

No Problem, Thanks For Looking, Daren

teeitup · 01-10-2008, 03:14 PM

No problem guys wish I could of helped.
BigDon, I'll pm you info. Thanks Randy

*fbodywrench26* · 01-10-2008, 03:23 PM

Hello, I am looking for big block motor mounts, upper and lower with the frame plates, also step side fenders or a bed, fleet or step, steering column- auto, set of body mounts, descent shape engine harness for a big block, rear harnesses for a short bed, 5 lug rear axle shafts, and much more that I cant think of. I am asking because I am new and they wont let me post a thread, so if you have any of these parts or know someone, please pass along my info, thanks

teeitup · 01-10-2008, 06:55 PM

I have a AT steering column for $40 plus ship, I don't think I have any of the other stuff your looking for, sorry. Thanks Randy

*Shane* · 01-11-2008, 11:43 AM

Got the AC controller! Thanks Randy, I think this is EXACTLY what I needed!

Shane

**88JRFAN** · 01-13-2008, 04:51 PM

Hey Randy, Any Chance I Could Get The Cargo Light Hole And I Need The Center Of The Dash, With The Radio And Heater And Ac Hole. THANKS DAREN

teeitup · 01-13-2008, 06:33 PM

Daren, sorry I hauled what was left of this truck to scrap today. I'm going to look at 72 tomorrow, not sure what all it has on it. I'll let you know, Thanks Randy

**88JRFAN** · 01-14-2008, 08:14 AM

Sounds Good, I'm Going To Start Dismantling The Gmc Cab And Fix It. The Second Po Did Some Messed Up Thing's On The Cab. By The Way It Look Better In Pics Then In Person, Bed Is In Sad Shape. Thanks Daren

teeitup · 01-14-2008, 08:19 AM

Daren, I hauled in a 72 this morning. It has the cargo light on it, but no AC. I'll probably post pics later today of it, or I mean start a new thread about it. Thanks Randy

**88JRFAN** · 01-14-2008, 08:49 AM

SOUNDS LIKE A WINNER, CAN'T WAIT FOR PICS OF NEW PARTS TRUCK,

. I COULD PROBABLY MAKE IT WORK WITHOUT AC HOLE. I'LL GET BACK WITH YA WHEN YOU GET NEW THREAD STARTED. THANKS DAREN

Guy58 · 01-14-2008, 08:53 AM

teeitup,
Does this truck have the spare tire carrier under the bed? If so I'm looking for a complete set up. Thanks,
Guy

teeitup · 01-14-2008, 09:06 AM

Guy, sorry spare tire carrier on it. Its pretty original but not one of those. Thanks Randy

MacGyver76 · 01-14-2008, 11:23 AM

Does the 72 have a power steering box and pump?
Need a long bed..
and the front grill.. if you still have one for a 70.

teeitup · 01-14-2008, 11:51 AM

Macgyver76, it has PS pump and box for $75 plus shipping for the pair, and the truck is running so I know its good. I got a real good long bed for $500. I got the front clip off this 70 here for $200, its not perfect but its pretty good, or I wouldn't of took it off. I'm listing the 72 here in a bit, I got pics of it all. Thanks let me know, Randy

01-07-2008, 08:42 AM	#51
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Re: parting 70 chevy truck now Randy, Do you have any medium (olive?) green defrost vents? Thanx, Bud

01-07-2008, 09:06 AM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now Bernie, it will go out Mon Bud, I don't think so, but I'll look Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-08-2008, 07:01 PM	#53
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting 70 chevy truck now Hey Randy, What Kind Of Shape Is The Bed Floor And The Rear Cross Member. Thanks Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-09-2008, 03:30 AM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now Daren, I'll have to clean it out and see, its got alot of trash in it, I'll try in the next couple evenings to get it cleaned out. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-09-2008, 04:32 AM	#55
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: parting 70 chevy truck now How much for headlight bezels for the 70?

01-09-2008, 03:16 PM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now bigdon, I need to look and see what I have out there. I will Tues after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2008, 03:10 AM	#58
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: parting 70 chevy truck now Thanks!

01-10-2008, 01:30 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now 69 1/2 6 pack bee, sorry none out there 88jrfan, bed floor is toast bigdon, I got one set out there $18 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2008, 02:00 PM	#60
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Re: parting 70 chevy truck now thanx for checking, Randy

01-10-2008, 02:46 PM	#61
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: parting 70 chevy truck now I'll take them! You take pay pal right?

01-10-2008, 02:52 PM	#62
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting 70 chevy truck now No Problem, Thanks For Looking, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-10-2008, 03:14 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now No problem guys wish I could of helped. BigDon, I'll pm you info. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-10-2008, 03:23 PM	#64
fbodywrench26 Account Suspended Join Date: Dec 2007 Location: Eastpointe Michigan Posts: 124	Re: parting 70 chevy truck now Hello, I am looking for big block motor mounts, upper and lower with the frame plates, also step side fenders or a bed, fleet or step, steering column- auto, set of body mounts, descent shape engine harness for a big block, rear harnesses for a short bed, 5 lug rear axle shafts, and much more that I cant think of. I am asking because I am new and they wont let me post a thread, so if you have any of these parts or know someone, please pass along my info, thanks

01-10-2008, 06:55 PM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now I have a AT steering column for $40 plus ship, I don't think I have any of the other stuff your looking for, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-11-2008, 11:43 AM	#66
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: parting 70 chevy truck now Got the AC controller! Thanks Randy, I think this is EXACTLY what I needed! Shane



Register or Log In To remove these advertisements.

01-13-2008, 04:51 PM	#67
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting 70 chevy truck now Hey Randy, Any Chance I Could Get The Cargo Light Hole And I Need The Center Of The Dash, With The Radio And Heater And Ac Hole. THANKS DAREN __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-13-2008, 06:33 PM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now Daren, sorry I hauled what was left of this truck to scrap today. I'm going to look at 72 tomorrow, not sure what all it has on it. I'll let you know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2008, 08:14 AM	#69
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting 70 chevy truck now Sounds Good, I'm Going To Start Dismantling The Gmc Cab And Fix It. The Second Po Did Some Messed Up Thing's On The Cab. By The Way It Look Better In Pics Then In Person, Bed Is In Sad Shape. Thanks Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-14-2008, 08:19 AM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now Daren, I hauled in a 72 this morning. It has the cargo light on it, but no AC. I'll probably post pics later today of it, or I mean start a new thread about it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-14-2008 at 08:52 AM.

01-14-2008, 08:49 AM	#71
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: parting 70 chevy truck now SOUNDS LIKE A WINNER, CAN'T WAIT FOR PICS OF NEW PARTS TRUCK, . I COULD PROBABLY MAKE IT WORK WITHOUT AC HOLE. I'LL GET BACK WITH YA WHEN YOU GET NEW THREAD STARTED. THANKS DAREN __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-14-2008, 08:53 AM	#72
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: parting 70 chevy truck now teeitup, Does this truck have the spare tire carrier under the bed? If so I'm looking for a complete set up. Thanks, Guy

01-14-2008, 09:06 AM	#73
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now Guy, sorry spare tire carrier on it. Its pretty original but not one of those. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2008, 11:23 AM	#74
MacGyver76 Registered User Join Date: Jul 2007 Location: Oklahoma City Posts: 13	Re: parting 70 chevy truck now Does the 72 have a power steering box and pump? Need a long bed.. and the front grill.. if you still have one for a 70. __________________ 1970 C10 1/2 Ton 2WD Long Bed (Project Truck) 2002 Dodge Ram 1500 Quad Cab 4X4 (Wifes) Wanting to do a off the frame restoration.

01-14-2008, 11:51 AM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting 70 chevy truck now Macgyver76, it has PS pump and box for $75 plus shipping for the pair, and the truck is running so I know its good. I got a real good long bed for $500. I got the front clip off this 70 here for $200, its not perfect but its pretty good, or I wouldn't of took it off. I'm listing the 72 here in a bit, I got pics of it all. Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.