4D'S "63" GMC Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LIVE RUST · 09-30-2008, 07:49 PM

Looks great! Flat black

4dranch · 10-01-2008, 09:15 AM

Thanks, Live Rust

**ChiefRocka** · 10-01-2008, 10:01 AM

SEM trim black is what alot of folks are using as well....I plan to body work and repaint mine some day too.

Currently I'm rock'n the OSH Primer Black !!

4dranch · 10-01-2008, 10:09 AM

OSH is a brand name? I did find and buy some flat black manifold paint last night. will work on getting them smoothed up and painted. Where's the best place to get the flat black paint at for the body?
and best for the lowest $$$$.
Thanks, David

scot 6 feet eleven · 10-01-2008, 11:38 AM

Id call john deer dealer

scot 6 feet eleven · 10-01-2008, 11:43 AM

Epoxy primer works good too thats what i have , but the more u wipe it and wash it you will get shiny spots, we used dupont hot rod black on our 49 shop truck but was spendy stuff

4dranch · 10-01-2008, 12:14 PM

This may sound a little stupid but is there a semi shiney flat back??

scot 6 feet eleven · 10-01-2008, 12:20 PM

I think guys add a little clear in the final coat of flat balck and that keeps it from fading, but keep in mind i know enough about body work to be dangerous

GMC65Guy · 10-01-2008, 04:08 PM

The key is to use reg. black and a flat clear to give it that flat black look with good protection

4dranch · 10-02-2008, 07:01 AM

Thanks 6'11" and 65GUY,
I didn't even know there was such a thing as flat clear. learn something new every day.

4dranch · 10-07-2008, 11:41 AM

Finally got the radiator hoses in. And got everything back together.
Now back to filling in some holes and some body work. I have some friends coming over this week and we may get her lowered a little. Check out the guard cat in the last picture.

283 Man · 10-07-2008, 11:54 AM

Looking great

!!

scot 6 feet eleven · 10-07-2008, 11:55 AM

excellent , all this hard work will pay off when your done!!!

4dranch · 10-07-2008, 12:20 PM

Thanks 283 man and 6'11"

Yeah, I can't wait 6'11" but it's a slow process...

**Corts60** · 10-07-2008, 10:33 PM

Quote:

Originally Posted by 4dranch

Made some progress last night on getting the engine compartment finished. I took "Corts60" suggestion on the breather and worked with it. I think it turned out fine, very clean look. Thanks for the suggestion Cort. here are some pictures.

That looks awesome man! Glad I could help...It's almost like a living negative photo...

4dranch · 10-08-2008, 08:59 AM

Yeah, I know what you mean. Thanks Cort.

4dranch · 10-16-2008, 01:16 PM

Got to do some work on the passenger side last night.. turned out okay..

Joey~AP · 10-16-2008, 04:33 PM

Lookin good!

4dranch · 10-16-2008, 04:38 PM

Thanks, Joey

Alan's Classic · 10-16-2008, 06:44 PM

It feels good to make some progress doesn't it? Thanks for the updates and it's looking good.

4dranch · 10-17-2008, 09:48 AM

Thanks, Alan
Really does feel good,,,it's a great stress reliever.

4dranch · 10-22-2008, 07:25 AM

This past weekend I wanted to try my luck at lowering the truck a little. I hope I am not the only one this happens to, but as soon as I start on something I find something else that needs fixin. I started on the rear leaf springs and noticed that the "U" bolts were all but wore through. I looked at all the local parts stores and no one carried the size I needed. But I did find some supper nice folks at a local company, Custom Springs who made me some new ones and only charge 9 bucks a peice. link to there web site http://www.custom-springs.com/

4dranch · 10-22-2008, 07:33 AM

Took these pictures last night when I finished with the front. Pictures are with cell phone my camera batteries were dead. It's lowered old school, short on $$$$ at the moment. but turned out cool,, If I do say so myself.

I went down about 3-4 inches in the front and back. Will get some better pictures posted soon.

283 Man · 10-22-2008, 08:39 AM

Looks cool David, love the stance

**ChiefRocka** · 10-22-2008, 09:06 AM

Look'n good man !!

The stance does look nice...Keep it up, your doing a good job.

09-30-2008, 07:49 PM	#51
LIVE RUST 1966 Chevy/GMC Mongrel K10 Join Date: Sep 2007 Location: Western MA Posts: 160	Re: 4D'S "63" GMC Build Looks great! Flat black

10-01-2008, 09:15 AM	#52
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks, Live Rust __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-01-2008, 10:01 AM	#53
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 4D'S "63" GMC Build SEM trim black is what alot of folks are using as well....I plan to body work and repaint mine some day too. Currently I'm rock'n the OSH Primer Black !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-01-2008, 10:09 AM	#54
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build OSH is a brand name? I did find and buy some flat black manifold paint last night. will work on getting them smoothed up and painted. Where's the best place to get the flat black paint at for the body? and best for the lowest $$$$. Thanks, David __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-01-2008, 11:38 AM	#55
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: 4D'S "63" GMC Build Id call john deer dealer

10-01-2008, 11:43 AM	#56
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: 4D'S "63" GMC Build Epoxy primer works good too thats what i have , but the more u wipe it and wash it you will get shiny spots, we used dupont hot rod black on our 49 shop truck but was spendy stuff

10-01-2008, 12:14 PM	#57
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build This may sound a little stupid but is there a semi shiney flat back?? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-01-2008, 12:20 PM	#58
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: 4D'S "63" GMC Build I think guys add a little clear in the final coat of flat balck and that keeps it from fading, but keep in mind i know enough about body work to be dangerous

10-01-2008, 04:08 PM	#59
GMC65Guy Registered User Join Date: Jun 2008 Location: Stillwater,Oklahoma Posts: 130	Re: 4D'S "63" GMC Build The key is to use reg. black and a flat clear to give it that flat black look with good protection

10-02-2008, 07:01 AM	#60
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks 6'11" and 65GUY, I didn't even know there was such a thing as flat clear. learn something new every day. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-07-2008, 11:41 AM	#61
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Finally got the radiator hoses in. And got everything back together. Now back to filling in some holes and some body work. I have some friends coming over this week and we may get her lowered a little. Check out the guard cat in the last picture. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-07-2008, 11:54 AM	#62
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: 4D'S "63" GMC Build Looking great!!

10-07-2008, 11:55 AM	#63
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: 4D'S "63" GMC Build excellent , all this hard work will pay off when your done!!!

10-07-2008, 12:20 PM	#64
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks 283 man and 6'11" Yeah, I can't wait 6'11" but it's a slow process... __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q Last edited by 4dranch; 10-07-2008 at 12:21 PM.

10-08-2008, 08:59 AM	#66
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Yeah, I know what you mean. Thanks Cort. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q



Register or Log In To remove these advertisements.

10-16-2008, 01:16 PM	#67
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Got to do some work on the passenger side last night.. turned out okay.. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-16-2008, 04:33 PM	#68
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: 4D'S "63" GMC Build Lookin good! __________________ Build in progress for son's first truck.

10-16-2008, 04:38 PM	#69
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks, Joey __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-16-2008, 06:44 PM	#70
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 4D'S "63" GMC Build It feels good to make some progress doesn't it? Thanks for the updates and it's looking good. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

10-17-2008, 09:48 AM	#71
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks, Alan Really does feel good,,,it's a great stress reliever. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-22-2008, 07:25 AM	#72
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build This past weekend I wanted to try my luck at lowering the truck a little. I hope I am not the only one this happens to, but as soon as I start on something I find something else that needs fixin. I started on the rear leaf springs and noticed that the "U" bolts were all but wore through. I looked at all the local parts stores and no one carried the size I needed. But I did find some supper nice folks at a local company, Custom Springs who made me some new ones and only charge 9 bucks a peice. link to there web site http://www.custom-springs.com/ Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-22-2008, 07:33 AM	#73
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Took these pictures last night when I finished with the front. Pictures are with cell phone my camera batteries were dead. It's lowered old school, short on $$$$ at the moment. but turned out cool,, If I do say so myself. I went down about 3-4 inches in the front and back. Will get some better pictures posted soon. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

10-22-2008, 08:39 AM	#74
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: 4D'S "63" GMC Build Looks cool David, love the stance

10-22-2008, 09:06 AM	#75
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 4D'S "63" GMC Build Look'n good man !! The stance does look nice...Keep it up, your doing a good job. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.