MY build thread... - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neto · 04-22-2009, 07:35 PM

"if I only had more money" You forgot time. LOL. Hey your truck is coming along nice.

shortbed70 · 04-22-2009, 07:49 PM

Thanks for the kind words to keep me encouraged. I now see why people that get into this stuff without a plan loose intrest because it get EXPENSIVE quickly. I mean I still have to buy rage filler,2K euro primer, long blocks,two front fenders,paint\clear. And then put it back togather...Anybody interested LOL

shortbed70 · 04-22-2009, 09:05 PM

Heres my made panels by hammering flat metal on the floor and now they fit just like the factory door patch would. They arent done yet I still have to clean them up and get the dimples out of them.

shortbed70 · 04-26-2009, 09:56 AM

Got some done yesterday. Bare metal epoxy primed and man eastwood stuff is thin like spraying water. Heres a few pics.

Alan's Classic · 04-26-2009, 10:38 PM

Progress is lookin' great!!

shortbed70 · 04-29-2009, 10:11 PM

Well I managed to make on heck of a mess in my shop tonight by stripping all the primer and bondo off my hood with 50 grit then 80 grit.... pics tomarrow before and after epoxy... Someone want to help clean up????????

neto · 04-29-2009, 11:26 PM

Wish I could help but I have my own mess to clean up. I primered my cab today and hope to start sanding tomorrow.

shortbed70 · 04-30-2009, 08:17 PM

Well heres the hood epoxied and ready to be worked. Enjoy.

Alan's Classic · 04-30-2009, 11:24 PM

Quote:

Originally Posted by shortbed70

Well I managed to make on heck of a mess in my shop tonight by stripping all the primer and bondo off my hood with 50 grit then 80 grit.... pics tomarrow before and after epoxy... Someone want to help clean up????????

I should have offered to clean up for ya, if you'd come sand my cab.

joe231 · 04-30-2009, 11:46 PM

nice progress....looks like your running in high gear now

shortbed70 · 05-01-2009, 07:04 PM

I'm starting to get supplies so I can move forward. Hey alan I would love to help if you were closer... Now I need a stud gun and some filler and off to the races. I'm trying to get this thing in primer by july to take to a show as in progress...Wish me luck and thanks for the kind words guys.

joe231 · 05-01-2009, 10:34 PM

good luck

Alan's Classic · 05-01-2009, 10:49 PM

Quote:

Originally Posted by joe231

good luck

x2

shortbed70 · 05-05-2009, 08:15 PM

Got some motor bling but no progress till I get back from vacation.

joe231 · 05-05-2009, 08:27 PM

I like those!!!
where did you get them?

Alan's Classic · 05-05-2009, 09:29 PM

That looks awesome.

shortbed70 · 05-05-2009, 10:24 PM

Got them from a swap meet in lawrance saterday 5-2-09. They are all over ebay for around $75-85 but I got them for 84 with rubber vc gaskets. I looked at the chrome ones just like these but the finish was real weavy and looked cheap. Thanks guys.

shortbed70 · 05-24-2009, 03:11 PM

Just a teaser but I finally got to work on my truck again and welded in the door handle delete plates I made but I'm kind of broke after hawaii so it will be tough to get things done for a while I will have pics later tonight. Also did some polishing on my carb.

shortbed70 · 05-24-2009, 07:13 PM

Heres todays work not much but something.

Alan's Classic · 05-24-2009, 07:43 PM

Nice work!!

joe231 · 05-25-2009, 01:22 AM

looks nice..it would appear that you gots some metal skillz

shortbed70 · 05-25-2009, 12:42 PM

Thats what I do for a living although now I just weld because theres no work but before all my jobs were fab jobs like floor pans,rockers,cab patches,if it was rusted we had to make it. Thats was fun. Now its just SLOW. Thanks guysat this rate I might be done next year LOL.

shortbed70 · 05-27-2009, 10:07 PM

Well no progress other than grinding cause I've been workin on some side jobs for my buddies 74 drag truck like solid motor mounts and an aluminum overflow tank. Heres the tank but cant find the mount pics.

jgh64pkup · 05-27-2009, 10:09 PM

looks good keep up the good work

1964C10 · 05-27-2009, 10:15 PM

Did you weld up the joint on the hood? They look great! How difficult was that? I am thinking about doing that as well if it's not too dangerous (warpage)

04-22-2009, 07:35 PM	#51
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: MY build thread... "if I only had more money" You forgot time. LOL. Hey your truck is coming along nice.

04-22-2009, 07:49 PM	#52
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks for the kind words to keep me encouraged. I now see why people that get into this stuff without a plan loose intrest because it get EXPENSIVE quickly. I mean I still have to buy rage filler,2K euro primer, long blocks,two front fenders,paint\clear. And then put it back togather...Anybody interested LOL __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-22-2009, 09:05 PM	#53
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Heres my made panels by hammering flat metal on the floor and now they fit just like the factory door patch would. They arent done yet I still have to clean them up and get the dimples out of them. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-26-2009, 09:56 AM	#54
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Got some done yesterday. Bare metal epoxy primed and man eastwood stuff is thin like spraying water. Heres a few pics. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-26-2009, 10:38 PM	#55
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Progress is lookin' great!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-29-2009, 10:11 PM	#56
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well I managed to make on heck of a mess in my shop tonight by stripping all the primer and bondo off my hood with 50 grit then 80 grit.... pics tomarrow before and after epoxy... Someone want to help clean up???????? __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-29-2009, 11:26 PM	#57
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: MY build thread... Wish I could help but I have my own mess to clean up. I primered my cab today and hope to start sanding tomorrow.

04-30-2009, 08:17 PM	#58
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well heres the hood epoxied and ready to be worked. Enjoy. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-30-2009, 11:46 PM	#60
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: MY build thread... nice progress....looks like your running in high gear now __________________ *CHEVY ONLY*

05-01-2009, 07:04 PM	#61
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... I'm starting to get supplies so I can move forward. Hey alan I would love to help if you were closer... Now I need a stud gun and some filler and off to the races. I'm trying to get this thing in primer by july to take to a show as in progress...Wish me luck and thanks for the kind words guys. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-01-2009, 10:34 PM	#62
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: MY build thread... good luck __________________ *CHEVY ONLY*

05-05-2009, 08:15 PM	#64
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Got some motor bling but no progress till I get back from vacation. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-05-2009, 08:27 PM	#65
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: MY build thread... I like those!!! where did you get them? __________________ *CHEVY ONLY*

05-05-2009, 09:29 PM	#66
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... That looks awesome. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-05-2009, 10:24 PM	#67
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Got them from a swap meet in lawrance saterday 5-2-09. They are all over ebay for around $75-85 but I got them for 84 with rubber vc gaskets. I looked at the chrome ones just like these but the finish was real weavy and looked cheap. Thanks guys. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274



Register or Log In To remove these advertisements.

05-24-2009, 03:11 PM	#68
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Just a teaser but I finally got to work on my truck again and welded in the door handle delete plates I made but I'm kind of broke after hawaii so it will be tough to get things done for a while I will have pics later tonight. Also did some polishing on my carb. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 05-24-2009 at 03:12 PM.

05-24-2009, 07:13 PM	#69
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Heres todays work not much but something. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-24-2009, 07:43 PM	#70
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Nice work!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-25-2009, 01:22 AM	#71
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: MY build thread... looks nice..it would appear that you gots some metal skillz __________________ *CHEVY ONLY*

05-25-2009, 12:42 PM	#72
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thats what I do for a living although now I just weld because theres no work but before all my jobs were fab jobs like floor pans,rockers,cab patches,if it was rusted we had to make it. Thats was fun. Now its just SLOW. Thanks guysat this rate I might be done next year LOL. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-27-2009, 10:07 PM	#73
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well no progress other than grinding cause I've been workin on some side jobs for my buddies 74 drag truck like solid motor mounts and an aluminum overflow tank. Heres the tank but cant find the mount pics. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-27-2009, 10:09 PM	#74
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: MY build thread... looks good keep up the good work __________________ Gage 1967 C10 Shortbed Stepside

05-27-2009, 10:15 PM	#75
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: MY build thread... Did you weld up the joint on the hood? They look great! How difficult was that? I am thinking about doing that as well if it's not too dangerous (warpage) __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.