parting out 2/1972 blazers - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 08-01-2009, 11:37 PM

tubs

billsbowtie · 08-01-2009, 11:42 PM

va_tlc · 08-01-2009, 11:56 PM

do you have a passenger side ram horn manifold/ with angled back outlet, with good studs. shipped to 24477 thanks tony

**71blksuper4x4** · 08-02-2009, 01:10 AM

bill, this is the piece that bolts to the a/c housing that holds the cannister higher. That is the piece that I was hoping you might have. Thanks Trevor

portugee14 · 08-02-2009, 12:12 PM

BILL i bought some of the blazer stricker rear hatch hard wear and you for got to send me the second of the two small peices like the 7 and 8 in the other blazer stricker add.

billsbowtie · 08-02-2009, 11:04 PM

tony & trever i will check on those parts.
portugee14 pm me your address again. i found that 1 after i mailed those parts. and i will send it to you. bill

ClifBlazer · 08-03-2009, 03:52 AM

do you have the power brake booster brakets

billsbowtie · 08-03-2009, 12:18 PM

i have these booster brackets for $28.00 shipped to you.

ClifBlazer · 08-03-2009, 01:31 PM

I wasn't clear Im lookn for the ones the rod from booster goes inbetween and connects to fire wall with 4 bolts&nuts [but Ill need those too]how about ignition-key switch & door locks with keys?

OLEBEATER · 08-03-2009, 01:45 PM

I'll take those braces for the brake booster if clifblazer dosen't get them. They will fit a 71 pu???

billsbowtie · 08-03-2009, 11:08 PM

clifblazer i will add the piece far right in pic. with brake rod for $20.00 more.
olebeater i have another pair for same price but they are not cleaned up or painted.

billsbowtie · 08-03-2009, 11:20 PM

tony is this what you need it looks good with good studs $25.00 plus $15.00 shipping.

billsbowtie · 08-03-2009, 11:21 PM

trevor i looked up the wrong part. i will try again tues.

billsbowtie · 08-03-2009, 11:23 PM

someone was looking for 1 of these heater boxes maybe they will see this.

billsbowtie · 08-03-2009, 11:51 PM

minimes68 i have 4 or 5 heater boxes i posted a pic. of 2 of them $25.00 each plus $20.00 shipping.

billsbowtie · 08-03-2009, 11:54 PM

keith i mailed your part today.

OLEBEATER · 08-04-2009, 06:47 AM

Picture of braces please....................thanks

billsbowtie · 08-04-2009, 11:09 PM

here they are olebeater.
trevor i could not find anything to help you. sorry

**71blksuper4x4** · 08-05-2009, 12:42 AM

Thanks for looking. Trevor

hotrod0688 · 08-05-2009, 01:09 AM

looks like your doing pretty good with the trucks, better than i would have done haha. By the way the woman still hasnt let me come over to look in the garage I dont know what the deal is. -Chris

OLEBEATER · 08-05-2009, 06:26 AM

how much shipped to 22435.................

billsbowtie · 08-05-2009, 01:36 PM

oldbeater $26.00 shipped to you.

billsbowtie · 08-05-2009, 01:38 PM

chris could you pm me your # again.
did you get that 85ish truck . my friend is interested in it when you get what you need off of it. keep me updated on the other stuff. thanks bill

va_tlc · 08-05-2009, 07:22 PM

thanks bill and yes thats what dad needs ill let him take a look at ur picture and ill let you know if he wants it, again thanks tony

best view · 08-05-2009, 08:52 PM

bill looking for driver taillight unit complete with wire also grill surronnd and missing all wood moulding on driver side driver qualty is fine kenny

08-01-2009, 11:37 PM	#51
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers tubs __________________ i have 67/72 chevy truck parts f/s.

08-01-2009, 11:42 PM	#52
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers __________________ i have 67/72 chevy truck parts f/s.

08-01-2009, 11:56 PM	#53
va_tlc Registered User Join Date: Nov 2005 Location: VIRGINIA Posts: 905	Re: parting out 2/1972 blazers do you have a passenger side ram horn manifold/ with angled back outlet, with good studs. shipped to 24477 thanks tony __________________ 1969 rs 1966fastback 1969swbc/10 2006gt 1972swb4x4

08-02-2009, 01:10 AM	#54
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting out 2/1972 blazers bill, this is the piece that bolts to the a/c housing that holds the cannister higher. That is the piece that I was hoping you might have. Thanks Trevor Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-02-2009, 12:12 PM	#55
portugee14 Registered User Join Date: Nov 2007 Location: Hanford, Ca Posts: 29	Re: parting out 2/1972 blazers BILL i bought some of the blazer stricker rear hatch hard wear and you for got to send me the second of the two small peices like the 7 and 8 in the other blazer stricker add.

08-02-2009, 11:04 PM	#56
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers tony & trever i will check on those parts. portugee14 pm me your address again. i found that 1 after i mailed those parts. and i will send it to you. bill __________________ i have 67/72 chevy truck parts f/s.

08-03-2009, 03:52 AM	#57
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: parting out 2/1972 blazers do you have the power brake booster brakets

08-03-2009, 12:18 PM	#58
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers i have these booster brackets for $28.00 shipped to you. __________________ i have 67/72 chevy truck parts f/s.

08-03-2009, 01:31 PM	#59
ClifBlazer Registered User Join Date: Jul 2009 Location: Lee Summit ,MO. Posts: 160	Re: parting out 2/1972 blazers I wasn't clear Im lookn for the ones the rod from booster goes inbetween and connects to fire wall with 4 bolts&nuts [but Ill need those too]how about ignition-key switch & door locks with keys?

08-03-2009, 01:45 PM	#60
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting out 2/1972 blazers I'll take those braces for the brake booster if clifblazer dosen't get them. They will fit a 71 pu???

08-03-2009, 11:08 PM	#61
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers clifblazer i will add the piece far right in pic. with brake rod for $20.00 more. olebeater i have another pair for same price but they are not cleaned up or painted. __________________ i have 67/72 chevy truck parts f/s.

08-03-2009, 11:20 PM	#62
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers tony is this what you need it looks good with good studs $25.00 plus $15.00 shipping. __________________ i have 67/72 chevy truck parts f/s.

08-03-2009, 11:21 PM	#63
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers trevor i looked up the wrong part. i will try again tues. __________________ i have 67/72 chevy truck parts f/s.

08-03-2009, 11:23 PM	#64
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers someone was looking for 1 of these heater boxes maybe they will see this. __________________ i have 67/72 chevy truck parts f/s.

08-03-2009, 11:51 PM	#65
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers minimes68 i have 4 or 5 heater boxes i posted a pic. of 2 of them $25.00 each plus $20.00 shipping. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

08-03-2009, 11:54 PM	#66
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers keith i mailed your part today. __________________ i have 67/72 chevy truck parts f/s.

08-04-2009, 06:47 AM	#67
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting out 2/1972 blazers Picture of braces please....................thanks

08-04-2009, 11:09 PM	#68
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers here they are olebeater. trevor i could not find anything to help you. sorry __________________ i have 67/72 chevy truck parts f/s.

08-05-2009, 12:42 AM	#69
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting out 2/1972 blazers Thanks for looking. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-05-2009, 01:09 AM	#70
hotrod0688 Registered User Join Date: Jun 2009 Location: Corbin, Ky Posts: 21	Re: parting out 2/1972 blazers looks like your doing pretty good with the trucks, better than i would have done haha. By the way the woman still hasnt let me come over to look in the garage I dont know what the deal is. -Chris

08-05-2009, 06:26 AM	#71
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting out 2/1972 blazers how much shipped to 22435.................

08-05-2009, 01:36 PM	#72
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers oldbeater $26.00 shipped to you. __________________ i have 67/72 chevy truck parts f/s.

08-05-2009, 01:38 PM	#73
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: parting out 2/1972 blazers chris could you pm me your # again. did you get that 85ish truck . my friend is interested in it when you get what you need off of it. keep me updated on the other stuff. thanks bill __________________ i have 67/72 chevy truck parts f/s.

08-05-2009, 07:22 PM	#74
va_tlc Registered User Join Date: Nov 2005 Location: VIRGINIA Posts: 905	Re: parting out 2/1972 blazers thanks bill and yes thats what dad needs ill let him take a look at ur picture and ill let you know if he wants it, again thanks tony __________________ 1969 rs 1966fastback 1969swbc/10 2006gt 1972swb4x4

08-05-2009, 08:52 PM	#75
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,164	Re: parting out 2/1972 blazers bill looking for driver taillight unit complete with wire also grill surronnd and missing all wood moulding on driver side driver qualty is fine kenny

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode