parting a 68 chevy now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 08-18-2009, 10:29 PM

Nate, I'll get some pics of mirror for you, Sorry not going to make the Nats. $50 for the gate, it has some issues
Mark, I'll check out the bed better after work. I can store stuff for you without any problem
Erasers, you must be talking about 67-68 GMC top bars, 67-68 chevys do not have a top bar
Tim, sure will. Hopefully out of the seven that I'm supposed to have bought one of them will have them
Thanks Randy

ERASER5 · 08-19-2009, 02:37 AM

Opps. My bad.

**STP67-72** · 08-19-2009, 06:45 AM

How much for the choke cable.

olblue60@aol.com · 08-19-2009, 07:33 AM

Hi Randy
I'm really just needing the 67 cluster face if that helps. Same price is OK!

John

**CPNE** · 08-19-2009, 09:50 AM

Randy, I'll take the door panels. Can you hold them until September? I'll be away until then.

teeitup · 08-19-2009, 07:55 PM

dash piece $20 plus shipping
man box $20 plus shipping
hood hinges $15 plus ship
brake pedal $15 plus ship
Auto column, its long $30 plus ship

teeitup · 08-19-2009, 07:56 PM

driver side inner, small rust $20 no ship
great rad support $80
decent pass door, rust in one corner $30
seat $30
6 cyl motor stands $30 shipped

teeitup · 08-19-2009, 07:58 PM

power glide shift linkage $25 plus ship
pics of mirror for Nate, some pitting on chrome

teeitup · 08-19-2009, 07:59 PM

GOOD underdash wiring $40 shipped
pic of gray for trevor
Pic for John
Pics of Grill for Michael, it has s couple small dents down low I couldn't see when bumper was on truck, only surface rust on back

teeitup · 08-19-2009, 08:00 PM

19-23

teeitup · 08-19-2009, 08:01 PM

Bedside pics for Mark, a couple more above these, rust in one area above wheelwell and its has had a dent fixed in back corner. If you want bed and gate $100 for it all

teeitup · 08-19-2009, 08:10 PM

STP67-72, the cable is approx 31 inches long, $20 shipped, sorry I forgot to get a pic of it
Olblue, John, I'll pm you
CPNE, Jeff, I can hold them for you
Thanks Randy

**STP67-72** · 08-19-2009, 08:35 PM

If the cable will work on a 67 v-8---- I will take it. If the fuse box wiring harness is good and not rusty around fuses-- I want it also.
Let me know total. Money order ok.

Also need shift bracket that bolts on turbo. I have allof the rest of it.
Thanks

**71blksuper4x4** · 08-19-2009, 08:37 PM

Thanks Randy, I owe you one. Trevor

teeitup · 08-19-2009, 08:50 PM

Steve, the truck was a 6 cyl truck, not sure if it would work or not. Here is pic of fuse box, it does have one cut wire, the wire that goes to the fan. $50 shipped for wiring and choke cable?
Trevor, no problem glad I could help you
Thanks Randy

**STP67-72** · 08-19-2009, 09:40 PM

The harness looks about like mine does.I will try the cable. Send me your address please

HOTFUN · 08-19-2009, 09:59 PM

Randy I'll pass on the bed and pay you for the hood if you can put it to the side somewhere for a while. PM me with payment info and I'll get you paid. I'll have to make a road trip with the pickup one of these days and pick the hood up then. Thanks, Mark

teeitup · 08-20-2009, 06:33 AM

STP67-72, Steve, cable is yours I'll pm you
Mark, I'll pm you
Thanks so much, Randy

teeitup · 08-20-2009, 06:34 AM

Grill is still for sale
Thanks Randy

Bubba4spd · 08-20-2009, 06:20 PM

I sorta liked how the old truck looked all in one piece. Guess the older I get the more sympathetic I am to old broken down things.

olblue60@aol.com · 08-21-2009, 06:13 AM

Paypal sent !

BigCarl · 08-21-2009, 07:44 AM

I am looking for the rear wiring harness... goes from the frame to the tail lights. Got it?

72BlckButy · 08-21-2009, 07:57 AM

Randy do you know if you're able to replace the glass in a mirror? My metal surround is in good condition, but the mirror itself has began to lose the "mirror" around the edges.

Is the mirror "perfect/excellent driver"?

**ScottH** · 08-21-2009, 10:02 AM

Randy, if the auto column is still available can u give me a shipping price to 08753?

Thanks.

Scott

**Hart_Rod** · 08-21-2009, 10:16 AM

Randy - just saw this - paypal info for the radio knobs.

R/

08-18-2009, 10:29 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Nate, I'll get some pics of mirror for you, Sorry not going to make the Nats. $50 for the gate, it has some issues Mark, I'll check out the bed better after work. I can store stuff for you without any problem Erasers, you must be talking about 67-68 GMC top bars, 67-68 chevys do not have a top bar Tim, sure will. Hopefully out of the seven that I'm supposed to have bought one of them will have them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-19-2009, 02:37 AM	#52
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: parting a 68 chevy now Opps. My bad. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-19-2009, 06:45 AM	#53
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	Re: parting a 68 chevy now How much for the choke cable. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-19-2009, 07:33 AM	#54
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: parting a 68 chevy now Hi Randy I'm really just needing the 67 cluster face if that helps. Same price is OK! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 08-19-2009 at 08:34 AM.

08-19-2009, 09:50 AM	#55
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: parting a 68 chevy now Randy, I'll take the door panels. Can you hold them until September? I'll be away until then. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-19-2009, 07:55 PM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now dash piece $20 plus shipping man box $20 plus shipping hood hinges $15 plus ship brake pedal $15 plus ship Auto column, its long $30 plus ship Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:04 PM.

08-19-2009, 07:56 PM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now driver side inner, small rust $20 no ship great rad support $80 decent pass door, rust in one corner $30 seat $30 6 cyl motor stands $30 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:03 PM.

08-19-2009, 07:58 PM	#58
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now power glide shift linkage $25 plus ship pics of mirror for Nate, some pitting on chrome Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:05 PM.

08-19-2009, 07:59 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now GOOD underdash wiring $40 shipped pic of gray for trevor Pic for John Pics of Grill for Michael, it has s couple small dents down low I couldn't see when bumper was on truck, only surface rust on back Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:07 PM.

08-19-2009, 08:00 PM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 19-23 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-19-2009, 08:01 PM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Bedside pics for Mark, a couple more above these, rust in one area above wheelwell and its has had a dent fixed in back corner. If you want bed and gate $100 for it all Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-19-2009 at 08:08 PM.

08-19-2009, 08:10 PM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now STP67-72, the cable is approx 31 inches long, $20 shipped, sorry I forgot to get a pic of it Olblue, John, I'll pm you CPNE, Jeff, I can hold them for you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-19-2009, 08:35 PM	#63
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	Re: parting a 68 chevy now If the cable will work on a 67 v-8---- I will take it. If the fuse box wiring harness is good and not rusty around fuses-- I want it also. Let me know total. Money order ok. Also need shift bracket that bolts on turbo. I have allof the rest of it. Thanks __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-19-2009, 08:37 PM	#64
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting a 68 chevy now Thanks Randy, I owe you one. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-19-2009, 08:50 PM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Steve, the truck was a 6 cyl truck, not sure if it would work or not. Here is pic of fuse box, it does have one cut wire, the wire that goes to the fan. $50 shipped for wiring and choke cable? Trevor, no problem glad I could help you Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

08-19-2009, 09:40 PM	#66
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	Re: parting a 68 chevy now The harness looks about like mine does.I will try the cable. Send me your address please __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

08-19-2009, 09:59 PM	#67
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: parting a 68 chevy now Randy I'll pass on the bed and pay you for the hood if you can put it to the side somewhere for a while. PM me with payment info and I'll get you paid. I'll have to make a road trip with the pickup one of these days and pick the hood up then. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-20-2009, 06:33 AM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now STP67-72, Steve, cable is yours I'll pm you Mark, I'll pm you Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-20-2009, 06:34 AM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Grill is still for sale Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-20-2009, 06:20 PM	#70
Bubba4spd Registered User Join Date: Sep 2005 Location: S. Georgia Posts: 254	Re: parting a 68 chevy now I sorta liked how the old truck looked all in one piece. Guess the older I get the more sympathetic I am to old broken down things.

08-21-2009, 06:13 AM	#71
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: parting a 68 chevy now Paypal sent ! __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-21-2009, 07:44 AM	#72
BigCarl Registered User Join Date: Sep 2007 Location: Thunder Bay, Ontario Posts: 170	Re: parting a 68 chevy now I am looking for the rear wiring harness... goes from the frame to the tail lights. Got it?

08-21-2009, 07:57 AM	#73
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: parting a 68 chevy now Randy do you know if you're able to replace the glass in a mirror? My metal surround is in good condition, but the mirror itself has began to lose the "mirror" around the edges. Is the mirror "perfect/excellent driver"? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-21-2009, 10:02 AM	#74
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting a 68 chevy now Randy, if the auto column is still available can u give me a shipping price to 08753? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-21-2009, 10:16 AM	#75
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: parting a 68 chevy now Randy - just saw this - paypal info for the radio knobs. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode