75 C20 long bed 2wd - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thirdstreettito · 01-04-2011, 12:07 AM

Where did you get the drop spindles, hangers, and shackles? That trucks looks so good down low. Good job!

bharrison1 · 01-04-2011, 01:44 PM

Thanks!!Well the spindles and hangers came from AIM industries it was kind of an ordeal which is a long story but i got them and they worked out great i am very happy with it!!

bharrison1 · 01-14-2011, 10:38 PM

Got my sway bar brackets and bushings from Classic Industries not too exciting but heres a pic

WillieloRidez · 01-19-2011, 09:16 PM

Lookin good man! Plenty of ground clearence as well

bharrison1 · 01-22-2011, 03:12 AM

got some shorter rear shocks they are Gabriel part #82007

bharrison1 · 01-22-2011, 02:39 PM

i may need a frame notch after all once i got the longer stock skocks off it dropped some more in the rear .the longer ones were holdoing it up cuz they were bottomed out

bharrison1 · 01-23-2011, 12:26 AM

new front shocks gabriel part#61525

WillieloRidez · 01-23-2011, 11:55 AM

Looks like its going to need a knotch to me man

bharrison1 · 05-20-2011, 09:29 PM

no update just a new pic

bharrison1 · 07-15-2011, 12:41 PM

My transmission is shot no reverse so its just sitting til i decide what to do with it motor is about done too so long term i would like to put an LS motor in it

WillieloRidez · 07-16-2011, 08:34 AM

turbo 400?

bharrison1 · 07-16-2011, 10:30 AM

Turbo 350

WillieloRidez · 02-20-2012, 11:00 AM

Any progress????

79 blue monster · 04-17-2012, 11:27 PM

Quote:

Originally Posted by bharrison1

ok so apparently im a ra-tard all i had to do was bend the brake lie a little and the caliper fit just fine ha ha

hahaha, i did the same thing! i felt dumb when i relized the brake line was hitting. We need some updates! i have some questions for you about my 3/4ton build!

bharrison1 · 04-18-2012, 08:53 PM

not much of an update i started tearin it all down to pull the motor and transmission its gonna be a long time before it sees the road again im gonna do an LS swap

79 blue monster · 04-18-2012, 09:26 PM

nice! how much offset are your wheels? i have a 5/7 drop and am told that if im running a 10in in back, i need 5in back spacing, and if im running 8.5 in front, i need 5 1/4in backspacing. do you have rubbing issues?

bharrison1 · 04-18-2012, 11:08 PM

mine dont rub at all i bought them used so i dont know the offset ill pull one off and measure it and let ya know

79 blue monster · 04-18-2012, 11:21 PM

Quote:

Originally Posted by bharrison1

mine dont rub at all i bought them used so i dont know the offset ill pull one off and measure it and let ya know

ok thanks, let me know!

bharrison1 · 06-19-2012, 11:14 PM

this is how it sits now

bharrison1 · 06-19-2012, 11:15 PM

oh and i had this done awhile back

WillieloRidez · 06-25-2012, 02:36 PM

Quote:

Originally Posted by bharrison1

oh and i had this done awhile back

I like it man i have never seen that before!

bharrison1 · 06-25-2012, 05:28 PM

Thanks!

bharrison1 · 07-17-2012, 10:34 PM

Traded my 20s for some 8 lug steelies and a 5.3!!

79 blue monster · 07-18-2012, 08:55 PM

nice! looking forward to updates

bharrison1 · 07-19-2012, 10:10 PM

this is the motor its from a 99 silverado

01-04-2011, 12:07 AM	#51
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: 75 C20 long bed 2wd Where did you get the drop spindles, hangers, and shackles? That trucks looks so good down low. Good job! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-04-2011, 01:44 PM	#52
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Thanks!!Well the spindles and hangers came from AIM industries it was kind of an ordeal which is a long story but i got them and they worked out great i am very happy with it!!

01-14-2011, 10:38 PM	#53
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Got my sway bar brackets and bushings from Classic Industries not too exciting but heres a pic Attached Images

01-19-2011, 09:16 PM	#54
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd Lookin good man! Plenty of ground clearence as well __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

01-22-2011, 03:12 AM	#55
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd got some shorter rear shocks they are Gabriel part #82007 Attached Images

01-22-2011, 02:39 PM	#56
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd i may need a frame notch after all once i got the longer stock skocks off it dropped some more in the rear .the longer ones were holdoing it up cuz they were bottomed out Attached Images

01-23-2011, 12:26 AM	#57
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd new front shocks gabriel part#61525 Attached Images

01-23-2011, 11:55 AM	#58
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd Looks like its going to need a knotch to me man __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

05-20-2011, 09:29 PM	#59
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd no update just a new pic Attached Images

07-15-2011, 12:41 PM	#60
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd My transmission is shot no reverse so its just sitting til i decide what to do with it motor is about done too so long term i would like to put an LS motor in it

07-16-2011, 08:34 AM	#61
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd turbo 400? __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

07-16-2011, 10:30 AM	#62
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Turbo 350

02-20-2012, 11:00 AM	#63
WillieloRidez Registered User Join Date: Feb 2010 Location: Wichita Kansas Posts: 667	Re: 75 C20 long bed 2wd Any progress???? __________________ WillieloRidez Drive em in Drag em out! Projects: 1956 Chevrolet 210 2dr post 58 chevrolet 2dr delray 58 chevrolet belair 4dr hardtop 1965 Chevelle big block 4spd 88 crewcab 1/2 ton long bed aka STRETCH Lt1-4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=388445

04-18-2012, 08:53 PM	#65
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd not much of an update i started tearin it all down to pull the motor and transmission its gonna be a long time before it sees the road again im gonna do an LS swap Attached Images

04-18-2012, 09:26 PM	#66
79 blue monster Registered User Join Date: Feb 2012 Location: Pulaski, Wi Posts: 491	Re: 75 C20 long bed 2wd nice! how much offset are your wheels? i have a 5/7 drop and am told that if im running a 10in in back, i need 5in back spacing, and if im running 8.5 in front, i need 5 1/4in backspacing. do you have rubbing issues? __________________ 1979 GMC 3/4 ton camper special 454 (7/8in drop) UPDATE: CADDILAC 500 SWAP AND 4X4 SWAP http://67-72chevytrucks.com/vboard/s...d.php?t=518625 1965 gmc 4x4 build : http://67-72chevytrucks.com/vboard/s...d.php?t=724972



Register or Log In To remove these advertisements.

04-18-2012, 11:08 PM	#67
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd mine dont rub at all i bought them used so i dont know the offset ill pull one off and measure it and let ya know

06-19-2012, 11:14 PM	#69
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd this is how it sits now Attached Images

06-19-2012, 11:15 PM	#70
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd oh and i had this done awhile back Attached Images

06-25-2012, 05:28 PM	#72
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Thanks!

07-17-2012, 10:34 PM	#73
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd Traded my 20s for some 8 lug steelies and a 5.3!!

07-18-2012, 08:55 PM	#74
79 blue monster Registered User Join Date: Feb 2012 Location: Pulaski, Wi Posts: 491	Re: 75 C20 long bed 2wd nice! looking forward to updates __________________ 1979 GMC 3/4 ton camper special 454 (7/8in drop) UPDATE: CADDILAC 500 SWAP AND 4X4 SWAP http://67-72chevytrucks.com/vboard/s...d.php?t=518625 1965 gmc 4x4 build : http://67-72chevytrucks.com/vboard/s...d.php?t=724972

07-19-2012, 10:10 PM	#75
bharrison1 Registered User Join Date: Jan 2010 Location: haysville,kansas Posts: 524	Re: 75 C20 long bed 2wd this is the motor its from a 99 silverado Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.