Bagged or Lowered on 15" Rally wheels?

[Mikec10]

Mine, static drop, not rallies but still 15s on 235/75 tires, which are too fat, what offset/backspacing and tire combo can i run so i can turn lock to lock while tucking?

[Square_78]

I love that old chevy light blue color.

[Gryndar]

My Junk. Current set is 3" drop arms, 1" drop springs in front and 4" shackle hanger kit in rear. 15x8, 4"bs corvette style wheels, police caps and 40s style trim rings front and rear with 295/50's at all corners no rubbing issues. plans are to drop 2 more inches if fron and drop rear to level it out. Plus adding 15x10 in rear.

[robert_63]

Here's my 85, djm tubular lower control arms with one coil cut from springs and flipkit on back. tires are a bit too tall but workin on it. currently have it dissassembled for a 5.3 swap.

[made2drag]

Originally Posted by robert_63

Here's my 85, djm tubular lower control arms with one coil cut from springs and flipkit on back. tires are a bit too tall but workin on it. currently have it dissassembled for a 5.3 swap.

nice!

[i heart square bodys]

[00

[i heart square bodys]

Originally Posted by ymerej71

Here's a couple pics of my '79 GMC...

how did you get the rims widened and what size of tires are you running front and rear ? how wide are the back rims and where was the width added ? thanks !! ohh and is the box tubbed at all ?

[74 stepside]

Wheel Vintiques makes the ralley wheels in 15x10

[yrusoslow]

i run 15x10's all the way around with 295/50-15's

[yrusoslow]

..

[flamingbig10]

I'm running them on the back with drag radials

[ymerej71]

Originally Posted by i heart square bodys

how did you get the rims widened and what size of tires are you running front and rear ? how wide are the back rims and where was the width added ? thanks !! ohh and is the box tubbed at all ?

I'm running 15"x8" wheels up front and 15"x10" (4.5" backspacing) on the rear. The rear wheels are wheel vintiques purchased from summitracing.com.
I've got 295/50/15 BFG T/A's on the rear, and 275/60/15 BFG's on the front. The front tires are a taller profile than the rear but I already had them on the truck and didn't want to buy new ones for now. With the front end sitting slightly lower than the rear the differences in the the tires isn't really noticable because the tops of the tires are tucked under the fenders... And no the bed is not tubbed. There's no need for it, the 295/50 plenty of room on a stock bed.
Posted via Mobile Device

[low81]

Bagged on rally wheels

[bbbc10]

looks good...any more pics...wht is ur air suspension set up

[69BBsuburban]

Not bagged....

[motornut]

I'm thinking to get 10s for the back,they look awesome here
would these be right?look like it
http://www.summitracing.com/parts/WV...5042/?rtype=10

[i heart square bodys]

Originally Posted by ymerej71

Thanks!
I've got 295/50/15 BFG T/A's on the rear, and 275/60/15 BFG's on the front. The front tires are a taller profile than the rear but I already had them on the truck and didn't want to buy new ones for now. With the front end sitting slightly lower than the rear the differences in the the tires isn't really noticable because the tops of the tires are tucked under the fenders. I'm also a little hesitant to get lower profile tires for the front because, with the static drop, I have to watch where I drive now to keep from dragging the lower arms.

are the wheels the 5 inch back space ones or the 4.5 inch backspace ones ? haha i want to get them for my truck but i want to make sure i get the right ones so i dont have to do any modifying to make them work , thanks !
i was also thinking about running those rims with 245's but now that i see you have the taller tires im thinking 245's might look a little too small . thoughts?

[81Psychobilly]

Lowered, non bagged

[BC10]

Originally Posted by Wet..Paint

Where did you get your center caps?

Thanks

x2 Those are NICE!

[Slammed66]

Bagged

[BC10]

Originally Posted by low81

Bagged on rally wheels

NICE! What is the backspace on those original rally?

[nico]

Here's mine before I replaced the cut springs... 15x8 Rallyes with 255/70 BFG's.

[Malo83]

This is my 83 with a 4/5 drop and 15x8 15x10 rallys

[Lambchop76]

Originally Posted by ymerej71

Sorry for the delay... the back axle is flipped which equates to about 5", and the front has dropped spindles plus 1 full coil cut out of the springs which sets the front end just a tad lower than the rear. 15x8 rallys on the front, 15x10's on the back.

What size are the dropped spindles? Perfect stance on this and want my 87 to sit this way. I too have 8" and 10" truck rallies. 295/50s rear and going with a 255/60 front

[Sodell]

My 87[IMG][/IMG]