77 Silverado Build thread - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

THE "10" SILVERADO · 04-13-2011, 11:05 PM

Well today I got my new power steering pump installed to fix the squealing I had every time I turned...I also put in the new gauges, lights, sockets, and replaced the printed circuit...and to find out...that my turn signal is on when it's not supposed to be and only the right light works.....for some reason...Also had a discovery of hacked up wires EVERYWHERE and a few items that I don't know what they do since they are not plugged in anywhere

Whats that big box thing in the first picture?

*87 chevy silverado* · 04-14-2011, 07:45 AM

looking good.. better pic of the first pic different angle?

sumran · 04-14-2011, 08:06 AM

Enjoying your thread. I hadn't seen it before today. The truck looks great and you are making fast, steady progress. Thanks for keeping us posted.

THE "10" SILVERADO · 05-13-2011, 07:58 PM

Got all the door weatherstripping out (besides window felt) and will be getting new ones bought soon....was able to fix the turn signal...it was a bad ground somewhere....I just pulled out the battery, vacuumed all of the leaves and twigs out and started looking around......didn't know for sure what to look for but I found a black wire that was broken, so I spliced it back together and now everything works.......I can't wait to get the truck re-wired because hunting wires is just a PITA!!!

On other news, on a trip back from my family ranch I found an old private scrap yard owned by this like 90 year old man...had to have at LEAST 30 squarebodies and tons of other cars (I even found a few Model T's and a few NICE 67 and 72s) I found a really nice red 78 that I'm going to try to go back and get some body panels off of....I really wanted to take pictures but my droid was dead at the time and couldn't

if I can get a call back from the guy I'll be going there and getting pictures for all of you.....

and that's the end of another small update

THE "10" SILVERADO · 05-29-2011, 08:41 PM

Got new (to me) wheels today....I think I got a pretty good deal.... $100 dollars for all four of them and the tires are in better condition than my weather rotted ones.....need some cleaning but I think they will turn out nice

spudz · 05-29-2011, 10:15 PM

Nice

THE "10" SILVERADO · 08-28-2011, 07:33 PM

Got the weatherstripping in last week. I had left it out without weatherstripping for most of the summer because I didn't have room in the garage and were in a drought. Well, it rained and there had been water leaks. Oh well, nothing got wet that I'm not replacing. Didn't snap any pictures thought but hopefully more work soon. The garage doesn't have A/C and it's to hot. My thermostat on the truck read 117 a couple of hours ago. Not working in that heat. My birthday is next week so I think I might treat myself to a Painless wiring system, and getting the brakes fixed. More updates soon (hopefully)

THE "10" SILVERADO · 09-06-2011, 08:54 AM

Checked out my window problem this weekend. Window was popping out of channel every time I used it. Well the door channel and weatherstripping is gone. Missing chunks here and gone there......need to get new ones but that wasn't the problem. Apparently the back track has a bracket to keep it from moving...mine was on the bottom of the door. Needless to say I "redneck" fixed it without any welding....putting pictures up tonight when I get the cable for my phone.

THE "10" SILVERADO · 09-06-2011, 08:59 AM

Also I checked the casting # on the engine. PO told me it was a rebuilt 307 but I've never wanted to hassle with it. FINDING IT IS A PAIN IN THE ____. I couldn't find the # on the pass. side but I found the casting number (with the addition of a headache from my head hitting the hood). I don't think the engine is a 307 now.....casting # read 3970010 so I'm thinking it's now a 350......SCORE!

THE "10" SILVERADO · 09-06-2011, 10:08 PM

Here is my "easy-fix" for the missing window track bracket. First discovered this checking the wheatherstripping out for folds...noticed something laying on the bottom of the door.......first pick is it missing track, then the bracket and the other side.......then "fixing" it without welding...

THE "10" SILVERADO · 09-07-2011, 11:29 PM

Just checking for my casting number......legs were like noodles afterwards....

jkeeney · 09-25-2011, 09:42 PM

awesome!

THE "10" SILVERADO · 09-25-2011, 09:55 PM

Quote:

Originally Posted by jkeeney

awesome!

thanks!

THE "10" SILVERADO · 09-26-2011, 07:23 PM

I've been looking for a passenger bedside w/ the fuel door they changed to in 79 for a while. Found quite a few that needed a lot of work but last night I came across an ad in Craigslist (thanks to a thread here that brought me to Craigslist and I was like, eh, why not check before bed?) and went over to the guys house to get it. Payed $150 for a new drivers side panel and front bed support and for the passenger bedside. Really happy to be able to pick them up today. Just shows you to keep up with Craigslist if you are looking for something!!!!!

Hopefully I'll get it installed soon cause I can't wait!!!

Hey, I don't know if the guy is on this forum but thanks Andy for the parts!

THE "10" SILVERADO · 10-10-2011, 05:52 PM

Got my new door channel felt on today. Too bad I was one day late on the only rain we've had for about four months

Windows shut up good and now I'm ready for more rain (us in Texas REALLY need it). Got the new bedside prepped and when I get more time going to install.

THE "10" SILVERADO · 10-10-2011, 05:56 PM

Also wanted to share my parents rides that I helped with. First is my step-dads 1967 Chevelle SS with a 454. (yes I know SS were 396). Next is my mom's 1978 Trans Am "Bandit" with a 403 Olds.

jkeeney · 10-11-2011, 08:59 AM

NICE- and yes we NEED rain!

Gordonr1973 · 10-11-2011, 04:56 PM

I wish I could come drive that Trans Am!!!

Nice garage!!

THE "10" SILVERADO · 10-11-2011, 11:22 PM

Got a little work done today. I didn't expect the right bedside to be much of a problem but I was wrong. Planned on getting it off and the new side on but nope, I was only able to get the first bedside off. Took me 4 hours too. I could barley get to some of the bolts so I wonder how some of the other guys on here can to some spots on their truck to. Going back up to the shop tomorrow after school to try to finish and get the new bedside on.

THE "10" SILVERADO · 10-11-2011, 11:23 PM

Quote:

Originally Posted by Gordonr1973

I wish I could come drive that Trans Am!!!

Nice garage!!

I don't know why buy I just care for the Chevelle more LOL (I think I do that just to annoy my mom).

Thanks!

jkeeney · 10-12-2011, 08:05 AM

The Chevelle ROCKS.

73gmc454 · 10-12-2011, 07:30 PM

Lookin good , I also dig the chevelle !

THE "10" SILVERADO · 10-12-2011, 10:51 PM

Got a lot done today, well at least for me that is. Got the new bedside on. THAT THING SUCKS! I guess it's just my not so experienced body work skill but I spent 30 minutes getting all of the lower bolts in but then none of the wheel-well bolts would line up. Had to take all of the other bolts out, line up the wheel-well bolts and get them in and then go back and put all of the other bolts back in. The area where GM spot welded it seems a little off so I'm going to have to go to my neighbors to get it spot welded again...guess I could refer to my truck as Frankenstein now. The newer bedside had a hole that was off from what the old side was. Probably changed when they changed to the "fuel door" that I wanted. Also the pattern of indention's on the side is different. Tailgate holder/bracket thing was different to so I had to switch those to. I took a crapload of pictures for reference so I might make a write-up on how to do this for people like me so they don't get stuck either

THE "10" SILVERADO · 10-17-2011, 11:31 AM

Just got some pictures today from my body guy. All of the trim is removed and the holes have been welded.

THE "10" SILVERADO · 10-17-2011, 04:16 PM

Got more pictures today. Already started painting. We are using a black sating shaded primer. I think it looks pretty good.

04-13-2011, 11:05 PM	#51
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: Got a little done today.... Well today I got my new power steering pump installed to fix the squealing I had every time I turned...I also put in the new gauges, lights, sockets, and replaced the printed circuit...and to find out...that my turn signal is on when it's not supposed to be and only the right light works.....for some reason...Also had a discovery of hacked up wires EVERYWHERE and a few items that I don't know what they do since they are not plugged in anywhere Whats that big box thing in the first picture? Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

04-14-2011, 07:45 AM	#52
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Got a little done today.... looking good.. better pic of the first pic different angle? Last edited by 87 chevy silverado; 04-14-2011 at 07:46 AM.

04-14-2011, 08:06 AM	#53
sumran Registered User Join Date: Feb 2011 Location: Gainesville, FL Posts: 406	Re: Got a little done today.... Enjoying your thread. I hadn't seen it before today. The truck looks great and you are making fast, steady progress. Thanks for keeping us posted. __________________ Randy Summers Never brake in the learning curve! 1984 GMC Sierra project truck http://67-72chevytrucks.com/vboard/s...d.php?t=446737

05-13-2011, 07:58 PM	#54
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: Got a little done today.... Got all the door weatherstripping out (besides window felt) and will be getting new ones bought soon....was able to fix the turn signal...it was a bad ground somewhere....I just pulled out the battery, vacuumed all of the leaves and twigs out and started looking around......didn't know for sure what to look for but I found a black wire that was broken, so I spliced it back together and now everything works.......I can't wait to get the truck re-wired because hunting wires is just a PITA!!! On other news, on a trip back from my family ranch I found an old private scrap yard owned by this like 90 year old man...had to have at LEAST 30 squarebodies and tons of other cars (I even found a few Model T's and a few NICE 67 and 72s) I found a really nice red 78 that I'm going to try to go back and get some body panels off of....I really wanted to take pictures but my droid was dead at the time and couldn't if I can get a call back from the guy I'll be going there and getting pictures for all of you..... and that's the end of another small update __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

05-29-2011, 08:41 PM	#55
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Got new (to me) wheels today....I think I got a pretty good deal.... $100 dollars for all four of them and the tires are in better condition than my weather rotted ones.....need some cleaning but I think they will turn out nice Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

05-29-2011, 10:15 PM	#56
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 77 Silverado Build thread Nice __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

08-28-2011, 07:33 PM	#57
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Got the weatherstripping in last week. I had left it out without weatherstripping for most of the summer because I didn't have room in the garage and were in a drought. Well, it rained and there had been water leaks. Oh well, nothing got wet that I'm not replacing. Didn't snap any pictures thought but hopefully more work soon. The garage doesn't have A/C and it's to hot. My thermostat on the truck read 117 a couple of hours ago. Not working in that heat. My birthday is next week so I think I might treat myself to a Painless wiring system, and getting the brakes fixed. More updates soon (hopefully) __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

09-06-2011, 08:54 AM	#58
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Checked out my window problem this weekend. Window was popping out of channel every time I used it. Well the door channel and weatherstripping is gone. Missing chunks here and gone there......need to get new ones but that wasn't the problem. Apparently the back track has a bracket to keep it from moving...mine was on the bottom of the door. Needless to say I "redneck" fixed it without any welding....putting pictures up tonight when I get the cable for my phone. __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

09-06-2011, 08:59 AM	#59
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Also I checked the casting # on the engine. PO told me it was a rebuilt 307 but I've never wanted to hassle with it. FINDING IT IS A PAIN IN THE ____. I couldn't find the # on the pass. side but I found the casting number (with the addition of a headache from my head hitting the hood). I don't think the engine is a 307 now.....casting # read 3970010 so I'm thinking it's now a 350......SCORE! __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

09-06-2011, 10:08 PM	#60
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Here is my "easy-fix" for the missing window track bracket. First discovered this checking the wheatherstripping out for folds...noticed something laying on the bottom of the door.......first pick is it missing track, then the bracket and the other side.......then "fixing" it without welding... Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

09-07-2011, 11:29 PM	#61
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Just checking for my casting number......legs were like noodles afterwards.... Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

09-25-2011, 09:42 PM	#62
jkeeney Registered User Join Date: Sep 2011 Location: Plano TX Posts: 10	Re: 77 Silverado Build thread awesome! __________________

09-26-2011, 07:23 PM	#64
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread I've been looking for a passenger bedside w/ the fuel door they changed to in 79 for a while. Found quite a few that needed a lot of work but last night I came across an ad in Craigslist (thanks to a thread here that brought me to Craigslist and I was like, eh, why not check before bed?) and went over to the guys house to get it. Payed $150 for a new drivers side panel and front bed support and for the passenger bedside. Really happy to be able to pick them up today. Just shows you to keep up with Craigslist if you are looking for something!!!!! Hopefully I'll get it installed soon cause I can't wait!!! Hey, I don't know if the guy is on this forum but thanks Andy for the parts! Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

10-10-2011, 05:52 PM	#65
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Got my new door channel felt on today. Too bad I was one day late on the only rain we've had for about four months Windows shut up good and now I'm ready for more rain (us in Texas REALLY need it). Got the new bedside prepped and when I get more time going to install. Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

10-10-2011, 05:56 PM	#66
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Also wanted to share my parents rides that I helped with. First is my step-dads 1967 Chevelle SS with a 454. (yes I know SS were 396). Next is my mom's 1978 Trans Am "Bandit" with a 403 Olds. Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9



Register or Log In To remove these advertisements.

10-11-2011, 08:59 AM	#67
jkeeney Registered User Join Date: Sep 2011 Location: Plano TX Posts: 10	Re: 77 Silverado Build thread NICE- and yes we NEED rain! __________________

10-11-2011, 04:56 PM	#68
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: 77 Silverado Build thread I wish I could come drive that Trans Am!!! Nice garage!! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

10-11-2011, 11:22 PM	#69
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Got a little work done today. I didn't expect the right bedside to be much of a problem but I was wrong. Planned on getting it off and the new side on but nope, I was only able to get the first bedside off. Took me 4 hours too. I could barley get to some of the bolts so I wonder how some of the other guys on here can to some spots on their truck to. Going back up to the shop tomorrow after school to try to finish and get the new bedside on. Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

10-12-2011, 08:05 AM	#71
jkeeney Registered User Join Date: Sep 2011 Location: Plano TX Posts: 10	Re: 77 Silverado Build thread The Chevelle ROCKS. __________________

10-12-2011, 07:30 PM	#72
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: 77 Silverado Build thread Lookin good , I also dig the chevelle ! __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

10-12-2011, 10:51 PM	#73
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Got a lot done today, well at least for me that is. Got the new bedside on. THAT THING SUCKS! I guess it's just my not so experienced body work skill but I spent 30 minutes getting all of the lower bolts in but then none of the wheel-well bolts would line up. Had to take all of the other bolts out, line up the wheel-well bolts and get them in and then go back and put all of the other bolts back in. The area where GM spot welded it seems a little off so I'm going to have to go to my neighbors to get it spot welded again...guess I could refer to my truck as Frankenstein now. The newer bedside had a hole that was off from what the old side was. Probably changed when they changed to the "fuel door" that I wanted. Also the pattern of indention's on the side is different. Tailgate holder/bracket thing was different to so I had to switch those to. I took a crapload of pictures for reference so I might make a write-up on how to do this for people like me so they don't get stuck either Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

10-17-2011, 11:31 AM	#74
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Just got some pictures today from my body guy. All of the trim is removed and the holes have been welded. Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

10-17-2011, 04:16 PM	#75
THE "10" SILVERADO Registered User Join Date: Sep 2010 Location: Marble Falls, TX Posts: 1,575	Re: 77 Silverado Build thread Got more pictures today. Already started painting. We are using a black sating shaded primer. I think it looks pretty good. Attached Images __________________ Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.