FL 1970 Dash - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gastrader35 · 01-07-2011, 09:26 PM

The trans linkage frame bracket i meant to say

Chilli · 01-07-2011, 09:30 PM

Quote:

Originally Posted by too much stuff

Tell your son happy birthday. So i am in for the glovebox door, gas pedal, engine stands (pictured) heat shield if it is there, and it looks like a steering bracket laying on the frame in front of the engine stand on the drivers side. Also, is there a power steering canister bolted to the drivers fender? Let me know a total when you have time. Eric
If you still have the engine, are the brackets or pullies for sale? There may also be a trans kickdown switch on the carb for the 400.

Trans bracket damaged
Engine saddles $25.00 for the pair shipped
Engine mounts on block $5.00 for the pair shipped
Power steering canister on inner fender $5.00 shipped
Gas pedal broken
Still don't know if I have the heat shield
AC brackets for big block $65.00 complete
AC compressor and lines $35.00
I want to keep the power steering pump and brackets for my project
Chilli

gastrader35 · 01-07-2011, 09:32 PM

So is the frame saddles sold

Chilli · 01-07-2011, 09:34 PM

Quote:

Originally Posted by sharpie1972

Dang! that's a little less than the $60 you hit me up for! Nice buy. Sharpie

I posted pics with the new price after i saw the surface rust
Sorry Sharpie
Chilli

Chilli · 01-07-2011, 09:34 PM

Quote:

Originally Posted by gastrader35

So is the frame saddles sold

I believe they are

gastrader35 · 01-07-2011, 09:37 PM

These are the parts i need plus the high hump. Frame saddles too if not sold. What is damaged on the linkage bracket

Chilli · 01-07-2011, 09:45 PM

Quote:

Originally Posted by gastrader35

These are the parts i need plus the high hump. Frame saddles too if not sold. What is damaged on the linkage bracket

you need that bracket and rod??
If so $15.00 shipped
I will let you know on the saddles
Chilli

gastrader35 · 01-07-2011, 09:49 PM

Yes the bracket that bolts to frame and rod with the bracket on it should be 3 pieces . Add it to the high hump and let me know on the saddles

*sharpie1972* · 01-07-2011, 10:07 PM

Quote:

Originally Posted by Chilli

I posted pics with the new price after i saw the surface rust
Sorry Sharpie
Chilli

No worries. Glad you're getting parts sold! I see the $20 price in post #22. My mistake! Sharpie

gastrader35 · 01-07-2011, 10:36 PM

could you post a pic of the rod , frame bracket and the bracket on the rod

**too much stuff** · 01-07-2011, 11:56 PM

Quote:

Originally Posted by Chilli

Trans bracket damaged
Engine saddles $25.00 for the pair shipped
Engine mounts on block $5.00 for the pair shipped
Power steering canister on inner fender $5.00 shipped
Gas pedal broken
Still don't know if I have the heat shield
AC brackets for big block $65.00 complete
AC compressor and lines $35.00
I want to keep the power steering pump and brackets for my project
Chilli

I will take the engine saddles for $25, power steering canister for $5, AC brackets for $65 and the glove box door. Can we check shipping on the compressor and lines? Does it spin freely?
If you are keeping the power steering setup, you may want to keep the canister unless you have another. I will send a PM for the total. Thanks.

70BLAZERX2 · 01-08-2011, 10:56 AM

for easy shipping, how much for both sets of seat tracks shipped to 37745

Thank you

70BLAZERX2 · 01-08-2011, 11:12 AM

Has anyone noticed that it has a POSI REAR..

gastrader35 · 01-08-2011, 03:59 PM

add that gas pedal , mounting bracket and cable to my other stuff.

70BLAZERX2 · 01-12-2011, 03:27 PM

any update? I am interested in seat brackets. if stock seats

apollos1970 · 01-12-2011, 07:42 PM

pm sent

GobbleStalker · 01-12-2011, 09:33 PM

Interested in the posi rearend. Do you know ther gearing?

70BLAZERX2 · 01-13-2011, 11:30 AM

Quote:

Originally Posted by GobbleStalker

Interested in the posi rearend. Do you know ther gearing?

should be a 3.73 as that was the standard gear ratio...3.08 and 4.10 would have been listed on glovbox label.

He needs to reply..lots of good parts on this truck

Chilli · 01-13-2011, 01:08 PM

I have not forgotten about all of the parts you guys want but I will be out of town until the 23rd .
Thanks for your patience.
Chilli

Chilli · 01-13-2011, 01:09 PM

Quote:

Originally Posted by GobbleStalker

Interested in the posi rearend. Do you know ther gearing?

the rear is not for sale ,Thanks
Chilli

tjsblazer · 01-13-2011, 02:34 PM

Interested in the oil guage only out of the dash if it is an 80lb.

Chilli · 01-19-2011, 08:18 PM

Quote:

Originally Posted by burb71

Is that a big block truck?
I'll take all of the factory exhuast hanger brackets
Can I see pics of them?

no factory hanger left
Thanks Chilli

Chilli · 01-19-2011, 08:26 PM

Quote:

Originally Posted by gastrader35

Allright then the high hump and frame bracket AND ENGINE SADDLES

the engine saddles are spoken for already , but the high hump and trans brackets are avail.

Chilli · 01-19-2011, 08:30 PM

Quote:

Originally Posted by GobbleStalker

Interested in the posi rearend. Do you know ther gearing?

rear is not for sale
Thanks Chilli

Chilli · 01-19-2011, 08:32 PM

Quote:

Originally Posted by tjsblazer

Interested in the oil guage only out of the dash if it is an 80lb.

oil gauge does not have psi # on it just low to high

01-07-2011, 09:26 PM	#51
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 1970 Dash The trans linkage frame bracket i meant to say __________________ NEW PROJECT 67 C/10 SHORT FLEET

01-07-2011, 09:32 PM	#53
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 1970 Dash So is the frame saddles sold __________________ NEW PROJECT 67 C/10 SHORT FLEET

01-07-2011, 09:37 PM	#56
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 1970 Dash These are the parts i need plus the high hump. Frame saddles too if not sold. What is damaged on the linkage bracket Attached Images __________________ NEW PROJECT 67 C/10 SHORT FLEET

01-07-2011, 09:49 PM	#58
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 1970 Dash Yes the bracket that bolts to frame and rod with the bracket on it should be 3 pieces . Add it to the high hump and let me know on the saddles __________________ NEW PROJECT 67 C/10 SHORT FLEET Last edited by gastrader35; 01-07-2011 at 10:30 PM.

01-07-2011, 10:36 PM	#60
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 1970 Dash could you post a pic of the rod , frame bracket and the bracket on the rod __________________ NEW PROJECT 67 C/10 SHORT FLEET

01-08-2011, 10:56 AM	#62
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: 1970 Dash for easy shipping, how much for both sets of seat tracks shipped to 37745 Thank you

01-08-2011, 11:12 AM	#63
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: 1970 Dash Has anyone noticed that it has a POSI REAR.. Last edited by 70BLAZERX2; 01-08-2011 at 11:12 AM.

01-08-2011, 03:59 PM	#64
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: 1970 Dash add that gas pedal , mounting bracket and cable to my other stuff. __________________ NEW PROJECT 67 C/10 SHORT FLEET

01-12-2011, 03:27 PM	#65
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: 1970 Dash any update? I am interested in seat brackets. if stock seats

01-12-2011, 07:42 PM	#66
apollos1970 Registered User Join Date: Oct 2009 Location: Fort Lauderdale, FL Posts: 70	Re: 1970 Dash pm sent __________________ 1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver

01-12-2011, 09:33 PM	#67
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: 1970 Dash Interested in the posi rearend. Do you know ther gearing? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

01-13-2011, 01:08 PM	#69
Chilli Registered User Join Date: Jan 2011 Location: Gainesville Florida Posts: 103	Re: 1970 Dash I have not forgotten about all of the parts you guys want but I will be out of town until the 23rd . Thanks for your patience. Chilli

01-13-2011, 02:34 PM	#71
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 1970 Dash Interested in the oil guage only out of the dash if it is an 80lb. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.