NY Parting out 66 C10 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PGSigns** · 07-08-2011, 07:22 AM

Few things I am interested in.
Pass side window regulator and the handle
Drivers side window crank handle
Arm rest if they are still usable
The section of the dash where the radio goes (mine is hacked up bad)
The glove box to use as a pattern to make a new one
Has it got the backup lights
the antenea
Thanks
Jimmy

Stubnosebrock · 07-08-2011, 10:11 AM

Quote:

Originally Posted by Sick5

how about bed side patch panels

For the time being, the bed is spoken for. The guy is supposed to get it next weekend. If that falls through, ill let you know.

Stubnosebrock · 07-08-2011, 10:39 AM

Quote:

Originally Posted by PGSigns

Few things I am interested in.
Pass side window regulator and the handle
Drivers side window crank handle
Arm rest if they are still usable
The section of the dash where the radio goes (mine is hacked up bad)
The glove box to use as a pattern to make a new one
Has it got the backup lights
the antenea
Thanks
Jimmy

Jimmy, ill make sure I can get the door panel off and ill let you know about the regulator. Arm rests are junk. Ill pull the existing radio out and send you a picture of the radio section. I do have the whole glove box. I dont have any back up lights. Im not sure if the antenna is original but it did work.

**PGSigns** · 07-08-2011, 11:17 AM

Thanks, just let me know.
Jimmy

Stubnosebrock · 07-08-2011, 07:24 PM

Quote:

Originally Posted by PGSigns

Thanks, just let me know.
Jimmy

Jimmy, heres a pic of the dash. Probably not much better than what you have. The antennae didnt make the removal. I cant get my door panels without some cutting. Those screws can get pretty rusty. I did get both window cranks if you want them.

**PGSigns** · 07-08-2011, 09:39 PM

My dash is much worse than that but you are right it won't make a good patch panel. Best way I have found on getting the panels off bad doors to save the good stuff is just to drill the heads off the screws. Put together what you can on my list and give me a price. Shipping would be to Virginia 23072.
Thanks
Jimmy

Stubnosebrock · 07-11-2011, 07:45 PM

Quote:

Originally Posted by PGSigns

My dash is much worse than that but you are right it won't make a good patch panel. Best way I have found on getting the panels off bad doors to save the good stuff is just to drill the heads off the screws. Put together what you can on my list and give me a price. Shipping would be to Virginia 23072.
Thanks
Jimmy

PM sent!

Stubnosebrock · 07-15-2011, 09:27 PM

Ttt!

**PGSigns** · 07-17-2011, 01:33 PM

Got the parts Friday. All looks good and I was able to make a pattern out of the old glove box.

nwaesmith · 07-17-2011, 02:52 PM

I need the accelerator linkage that goes from the pedal thru the fire wall shipped to 42262

Stubnosebrock · 07-17-2011, 09:29 PM

Good im glad! I was wondering if you would be able to get anything out of that glovebox.

Stubnosebrock · 07-17-2011, 09:30 PM

Quote:

Originally Posted by nwaesmith

I need the accelerator linkage that goes from the pedal thru the fire wall shipped to 42262

Sorry, I already sold it locally. Thanks!

nwaesmith · 07-18-2011, 11:00 PM

what about the stainless grill?

Stubnosebrock · 07-19-2011, 08:30 AM

Its not stainless, just painted.

deuceq · 07-19-2011, 12:19 PM

what about the hood?

Stubnosebrock · 07-19-2011, 01:29 PM

Hood is gone, sorry

JimmyFloyd · 07-19-2011, 02:21 PM

looks like some good stuff there, and I'm guessing close to me.

Putting this out there, but if anyone in the Rochester, NY area is looking for some larger parts from him, I am heading up to Rochester this weekend, and if you can work out the deal with Stubnosebrock, I might be able to bring it up with me for a few bucks towards gas.

fink64 · 07-19-2011, 10:31 PM

i need a window regulator driver side that works and isnt all rusted up if you have one let me know if you take pay pal we can make this deal quick my zip is 63390 wright city mo thanks Dwain

Stubnosebrock · 07-19-2011, 10:56 PM

Quote:

Originally Posted by fink64

i need a window regulator driver side that works and isnt all rusted up if you have one let me know if you take pay pal we can make this deal quick my zip is 63390 wright city mo thanks Dwain

Dwain, ive got one. Let me take a good look at it and ill let you know. Im pretty sure its very usable.

fink64 · 07-20-2011, 07:59 PM

great on the window regulator let me know what you want for it. thanks Dwain

nwaesmith · 07-20-2011, 08:45 PM

how much for the grille.

Stubnosebrock · 07-20-2011, 10:46 PM

Quote:

Originally Posted by nwaesmith

how much for the grille.

Its got some rust by the headlight bucket. $20.00

Caudillo64 · 07-22-2011, 03:09 PM

I'm looking for the top radiator mount and lower radiator mounts

Stubnosebrock · 07-23-2011, 12:18 AM

Quote:

Originally Posted by Caudillo64

I'm looking for the top radiator mount and lower radiator mounts

Top radiator mount is gone, bottoms are trash.

Caudillo64 · 07-23-2011, 12:55 AM

Looking for radiator top hold down and lower radiator mount

07-08-2011, 07:22 AM	#51
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting out 66 C10 Few things I am interested in. Pass side window regulator and the handle Drivers side window crank handle Arm rest if they are still usable The section of the dash where the radio goes (mine is hacked up bad) The glove box to use as a pattern to make a new one Has it got the backup lights the antenea Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

07-08-2011, 11:17 AM	#54
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting out 66 C10 Thanks, just let me know. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

07-08-2011, 09:39 PM	#56
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting out 66 C10 My dash is much worse than that but you are right it won't make a good patch panel. Best way I have found on getting the panels off bad doors to save the good stuff is just to drill the heads off the screws. Put together what you can on my list and give me a price. Shipping would be to Virginia 23072. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

07-15-2011, 09:27 PM	#58
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Ttt!

07-17-2011, 01:33 PM	#59
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting out 66 C10 Got the parts Friday. All looks good and I was able to make a pattern out of the old glove box. __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

07-17-2011, 02:52 PM	#60
nwaesmith Registered User Join Date: Mar 2011 Location: Oak Grove, KY Posts: 26	Re: Parting out 66 C10 I need the accelerator linkage that goes from the pedal thru the fire wall shipped to 42262

07-17-2011, 09:29 PM	#61
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Good im glad! I was wondering if you would be able to get anything out of that glovebox.

07-18-2011, 11:00 PM	#63
nwaesmith Registered User Join Date: Mar 2011 Location: Oak Grove, KY Posts: 26	Re: Parting out 66 C10 what about the stainless grill?

07-19-2011, 08:30 AM	#64
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Its not stainless, just painted.

07-19-2011, 12:19 PM	#65
deuceq Registered User Join Date: Jul 2011 Location: Laurel, MS Posts: 4	Re: Parting out 66 C10 what about the hood?

07-19-2011, 01:29 PM	#66
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Hood is gone, sorry

07-19-2011, 02:21 PM	#67
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting out 66 C10 looks like some good stuff there, and I'm guessing close to me. Putting this out there, but if anyone in the Rochester, NY area is looking for some larger parts from him, I am heading up to Rochester this weekend, and if you can work out the deal with Stubnosebrock, I might be able to bring it up with me for a few bucks towards gas. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

07-19-2011, 10:31 PM	#68
fink64 Registered User Join Date: Oct 2010 Location: new florence, mo Posts: 70	Re: Parting out 66 C10 i need a window regulator driver side that works and isnt all rusted up if you have one let me know if you take pay pal we can make this deal quick my zip is 63390 wright city mo thanks Dwain

07-20-2011, 07:59 PM	#70
fink64 Registered User Join Date: Oct 2010 Location: new florence, mo Posts: 70	Re: Parting out 66 C10 great on the window regulator let me know what you want for it. thanks Dwain

07-20-2011, 08:45 PM	#71
nwaesmith Registered User Join Date: Mar 2011 Location: Oak Grove, KY Posts: 26	Re: Parting out 66 C10 how much for the grille.



Register or Log In To remove these advertisements.

07-22-2011, 03:09 PM	#73
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: Parting out 66 C10 I'm looking for the top radiator mount and lower radiator mounts

07-23-2011, 12:55 AM	#75
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: Parting out 66 C10 Looking for radiator top hold down and lower radiator mount

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.