IN Misc Frame Parts $10-$20-$40 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BuildinA68 · 01-04-2012, 10:48 AM

Hey I actually don't need the leaf itself, I need the one hanger. The passenger side rear hanger. Would be good to get the just the hanger and the bolts unless the bolts get tore up getting it loose from the frame. Sorry for the confusion. Let me know if you can help out.

Thanks
Posted via Mobile Device

HeavyMetalChevy · 01-04-2012, 01:21 PM

Quote:

Originally Posted by BuildinA68

Hey I actually don't need the leaf itself, I need the one hanger. The passenger side rear hanger. Would be good to get the just the hanger and the bolts unless the bolts get tore up getting it loose from the frame. Sorry for the confusion. Let me know if you can help out.

Thanks
Posted via Mobile Device

Yeah I know what ya' meant buddy... The hanger is riveted to the frame... I already have two whole rears separated from the frames is what I was saying.. So I am not worried about keeping the suspensions complete... I will get it off and blast it... $30 shipped med flat rate USPS

BuildinA68 · 01-04-2012, 01:32 PM

sounds great just let me know when it is ready!!

Thanks

buddylee · 01-04-2012, 05:13 PM

payment sent status?

HeavyMetalChevy · 01-04-2012, 06:26 PM

Quote:

Originally Posted by buddylee

payment sent status?

don't worry buddy... Ryan is behind you... member dadsworktruck was first... he bought a lot of parts which I had to cut from frame and blast... Weather got me a couple days there because my blast setup is outside still and I need to finish my blast room... I finish his stuff today will be hitting yours tomorrow... Those metal floor sills are a pain... I def. bit off more than I could chew with all this blasting and frame part out but I have strong teeth!!!

Great learning exp. and now I can set the pace/bar for any future en devours I might take. Sorry...you guys are the guinea pigs...but the prices are really great so thats a plus and you will receive some really killer parts! The pain with the sills was not damaging them upon extraction from the floor. I had to cut off of the sill...remove them...bust all the spot welds with an air chisel...grind the spot welds off...they have been off since last week just takes more time than expected... Thanks for understanding.. As you can tell I try my best to make everyone happy...

Thanks!

HeavyMetalChevy · 01-04-2012, 06:32 PM

Quote:

Originally Posted by dadsworktruck

pay pal sent.....thanks

Hey thanks for being patient... I def. overloaded my A** on this one but great experience... Now I have more accurate idea of what all a frame part out consists of... Here are pics of your parts.. thanks for being patient.. There was quite a bit of time put into this venture

HeavyMetalChevy · 01-04-2012, 06:34 PM

backside

BuildinA68 · 01-05-2012, 03:55 AM

thats cool just let me know when they are ready and i will let you know if i need anything else, which i probably WILL!!!

Thanks

stfinney · 01-05-2012, 09:46 AM

What would shipping be to 37388 on that rearend? I wish I could just come pick it up.

HeavyMetalChevy · 01-05-2012, 03:45 PM

Quote:

Originally Posted by stfinney

What would shipping be to 37388 on that rearend? I wish I could just come pick it up.

It will be around 100 bucks I returned your pm as well on it... That's a pretty killer deal because that is cheaper than just the price of gas depending on mpg rating.

HeavyMetalChevy · 01-09-2012, 04:10 PM

Quote:

Originally Posted by BuildinA68

thats cool just let me know when they are ready and i will let you know if i need anything else, which i probably WILL!!!

Thanks

Hey Ryan... The hanger is ready whenever you are. Will send out as soon as pp received for $30.. blasted rear pass. hanger..

Thanks,
Duane

HeavyMetalChevy · 01-10-2012, 03:48 AM

Quote:

Originally Posted by buddylee

payment sent status?

thanks for being patient buddy... Lots of frame parts...rivets...and blasting

pics for you... should have sent out tomorrow and track number via UPS!

Thanks again

HeavyMetalChevy · 01-10-2012, 03:51 AM

few more

timberjim36 · 01-10-2012, 11:57 AM

Hey heavy you still have the bed mounts if so how much to 02538 unblasted
Posted via Mobile Device

HeavyMetalChevy · 01-10-2012, 04:16 PM

Quote:

Originally Posted by timberjim36

Hey heavy you still have the bed mounts if so how much to 02538 unblasted
Posted via Mobile Device

I will check but I think they got scrapped... I KNEW I should have hung onto them!! I will get back with you on here. Thanks

dadsworktruck · 01-10-2012, 11:53 PM

received my crossmembers today, you did a good job on blasting, all i got to do is remove a few rivets pieces and paint and bolt up, thanks for ur extra work!!!!
don and jason

HeavyMetalChevy · 01-11-2012, 12:35 AM

Quote:

Originally Posted by dadsworktruck

received my crossmembers today, you did a good job on blasting, all i got to do is remove a few rivets pieces and paint and bolt up, thanks for ur extra work!!!!
don and jason

THANKS SOOOOOO MUCH!!! Did not mean to leave "extra work" for you but I put in some man hours there for you buddy!!!

One thing I pride myself on is my work ethic... I sure gave them H***! I am so glad and satisfied that people are starting to recognize that I am in this for everyone...myself included. I honestly LOVE helping others and seeing all these projects coming together and having even a minute part in them. Glad ou got them finally! thanks again!

KEEP "TRUCKIN"

Pro Metal Shop · 01-11-2012, 06:58 PM

I'll take the inner rear tubs , payment sent

HeavyMetalChevy · 01-11-2012, 07:26 PM

Quote:

Originally Posted by Pro Metal Shop

I'll take the inner rear tubs , payment sent

Wheel Tubs sold to Pro Metal Shop!!! Thanks.. .Should be out tomorrow with a cross sill I have going out. Schedule pickup tonight! Thanks

I will have track # for you tomorrow afternoon. thanks,
Duane

Pro Metal Shop · 01-17-2012, 03:43 PM

Got my tubs today thanks again great looking parts ! !

Posted via Mobile Device

**CC69Rat** · 01-17-2012, 03:52 PM

Duane - We need some pics of the puppy !!! Did you get him?

HeavyMetalChevy · 01-17-2012, 05:14 PM

Quote:

Originally Posted by Pro Metal Shop

Got my tubs today thanks again great looking parts ! !

Posted via Mobile Device

Hey man thank you!! You can see where I was starting to patch that one area in on it... Don't judge my welds!!! lol I literally just started tacking that in because I was going to repair myself then behold you said you wanted them as is.. Figured you user name was Pro Metal Shop for a reason!!!! lol

HeavyMetalChevy · 01-17-2012, 05:17 PM

Quote:

Originally Posted by CC69Rat

Duane - We need some pics of the puppy !!! Did you get him?

no he went to the vet today... Ended up costing a little more to ship than expected but he's a coming!!! Should be arriving in Louisville this week. Crate ended up being $60 but it is getting shipped with the receipt so I can hopefully just take it back at a local PETCO here.. Chad... Pics are in the general discussion thread titled "PUPPY LOVE" lol

**CC69Rat** · 01-24-2012, 09:01 AM

Received that inner fender .. it's all wadded up man !!

Just kiddin

Looks Great. Thanks Duane.

HeavyMetalChevy · 01-24-2012, 11:09 AM

Quote:

Originally Posted by CC69Rat

Received that inner fender .. it's all wadded up man !!

Just kiddin

Looks Great. Thanks Duane.

Thanks A LOT!!!! A-HOLE!! lol It was a mess of packing but Greyhound is legit just protected the top and shrink wrapped... WAH-LAH!!

01-04-2012, 10:48 AM	#51
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: Misc Frame Parts $10-$20-$40 Hey I actually don't need the leaf itself, I need the one hanger. The passenger side rear hanger. Would be good to get the just the hanger and the bolts unless the bolts get tore up getting it loose from the frame. Sorry for the confusion. Let me know if you can help out. Thanks Posted via Mobile Device __________________ Ryan

01-04-2012, 01:32 PM	#53
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: Misc Frame Parts $10-$20-$40 sounds great just let me know when it is ready!! Thanks __________________ Ryan

01-04-2012, 05:13 PM	#54
buddylee Registered User Join Date: Jan 2010 Location: Coventry,RI Posts: 114	Re: Misc Frame Parts $10-$20-$40 payment sent status?

01-04-2012, 06:34 PM	#57
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 backside Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

01-05-2012, 03:55 AM	#58
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: Misc Frame Parts $10-$20-$40 thats cool just let me know when they are ready and i will let you know if i need anything else, which i probably WILL!!! Thanks __________________ Ryan

01-05-2012, 09:46 AM	#59
stfinney Registered User Join Date: Apr 2011 Location: Vero Beach, FL Posts: 173	Re: Misc Frame Parts $10-$20-$40 What would shipping be to 37388 on that rearend? I wish I could just come pick it up.

01-10-2012, 03:51 AM	#63
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 few more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

01-10-2012, 11:57 AM	#64
timberjim36 Registered User Join Date: Jun 2011 Location: cape cod ma Posts: 160	Re: Misc Frame Parts $10-$20-$40 Hey heavy you still have the bed mounts if so how much to 02538 unblasted Posted via Mobile Device __________________ 1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver) 92 harley electra glide ultra classic

01-10-2012, 11:53 PM	#66
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: Misc Frame Parts $10-$20-$40 received my crossmembers today, you did a good job on blasting, all i got to do is remove a few rivets pieces and paint and bolt up, thanks for ur extra work!!!! don and jason

01-11-2012, 06:58 PM	#68
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: Misc Frame Parts $10-$20-$40 I'll take the inner rear tubs , payment sent __________________ Thanks Steve http://chevylegends.com/forum/index.php

01-17-2012, 03:43 PM	#70
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: Misc Frame Parts $10-$20-$40 Got my tubs today thanks again great looking parts ! ! Posted via Mobile Device __________________ Thanks Steve http://chevylegends.com/forum/index.php

01-17-2012, 03:52 PM	#71
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Misc Frame Parts $10-$20-$40 Duane - We need some pics of the puppy !!! Did you get him? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-24-2012, 09:01 AM	#74
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Misc Frame Parts $10-$20-$40 Received that inner fender .. it's all wadded up man !! Just kiddin Looks Great. Thanks Duane. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.