MO 1967 SWB Project / Part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Terrell_Extremes · 07-03-2012, 10:32 PM

Quote:

Originally Posted by CrashEd

How much for the motor

I have about $4500 in everything for motor

I would take $4000 shipped OBO.

Terrell_Extremes · 07-03-2012, 10:37 PM

Quote:

Originally Posted by MidWest72C10

is 425 shipped bottom dollar for one piece window?

The lowest I could go is $400 shipped. I paid $400 plus shipping. Look on Brothers Truck parts for 1 piece window conversions for this year of trucks. They are $399 plus shipping, that is over sized shipping.

54belair · 07-04-2012, 09:15 AM

Good morning,

In the description you mentioned that youd like to sell the chassis complete with all parts. You stated price, is that with the new parts?

Id like to see it, If you would PM me your phone or address so I can see it.
Im just about a mile south and 2 east of bolivar.

Thanks,,steve

kingsolver72 · 07-04-2012, 11:26 AM

Quote:

Originally Posted by Terrell_Extremes

Thanks olblue, I did read that, but I read it over real fast and I guess I thought it ment double posting in same classified forum. If I do cause problems sorry, trying to sell the truck both ways. I guess if I look at it now, my ad in the completed trucks needs to be taken off, and I will sell as parting out.
Again sorry for any inconvience.

The ad that you posted on C.L. yesterday,states that you will not part out the truck at this time. I realize that you can not delete the ad you posted in the trucks for sale forum but,probably adds to the confusion. I do not believe you are intentionally doing anything dubious, perhaps you can see where this may be a little hard to follow. I hope the best for you on your sale.
TTT
Posted via Mobile Device

MidWest72C10 · 07-04-2012, 05:14 PM

as long as everything is there for the one piece window i will go ahead and take them for $400 shipped

Terrell_Extremes · 07-04-2012, 05:20 PM

Quote:

Originally Posted by MidWest72C10

as long as everything is there for the one piece window i will go ahead and take them for $400 shipped

Yes everything is there. I take paypal or you can mail me a money order.
If using paypal, please send as gift. PM you shipping info and i will send you my paypal info.
Posted via Mobile Device

Tinkermc · 07-04-2012, 06:52 PM

nice lookin parts, ttt

MidWest72C10 · 07-04-2012, 07:58 PM

pp sent

HotRod C/10 · 07-04-2012, 11:31 PM

will you do 150 shipped on the headers?

Littletony · 07-05-2012, 03:35 AM

Quote:

Originally Posted by Terrell_Extremes

CPP transmission mount - $85 shipped
CPP motor mounts - $140 shipped
CPP brake booster w/proportioning valve - $270 shipped

Can you give me the part numbers for these parts?

Terrell_Extremes · 07-05-2012, 08:12 AM

Midwest72c10 has bought the 1 piece window kit.
Window kit sold. Thanks midwest72c10.
Posted via Mobile Device

Terrell_Extremes · 07-05-2012, 08:18 AM

Quote:

Originally Posted by DSALRAM

will you do 150 shipped on the headers?

I would do $165 shipped
Posted via Mobile Device

Terrell_Extremes · 07-05-2012, 08:56 AM

Quote:

Originally Posted by Littletony

Can you give me the part numbers for these parts?

Transmission mount - CP9472
Motor mounts - 6372MP-T
Brake booster - 6772BB2
Posted via Mobile Device

Littletony · 07-05-2012, 10:20 AM

Is the brake booster set up for disc/drum or disc/disc?

Terrell_Extremes · 07-05-2012, 10:24 AM

Quote:

Originally Posted by Littletony

Is the brake booster set up for disc/drum or disc/disc?

Booster is setup for disc/drum
Posted via Mobile Device

cinci00si · 07-05-2012, 04:56 PM

Is the Hood still available? How much if so?

Terrell_Extremes · 07-05-2012, 05:16 PM

Quote:

Originally Posted by cinci00si

Is the Hood still available? How much if so?

Still available - $150
Hood in really good shape

cinci00si · 07-05-2012, 05:18 PM

Quote:

Originally Posted by Terrell_Extremes

Still available - $150
Hood in really good shape

Any rot or dents? Do you have any other pictures.

Terrell_Extremes · 07-05-2012, 05:36 PM

No rot. I havent seen any dents
Below is only other pic that I got at moment. I will get 1 of inside of hood tomorrow and post.

rusty67 · 07-06-2012, 05:18 PM

Dude I'll do a combo deal on the bed without the tailgate, aluminum dash panel with all the gauges, and if you still havent sold the headers on here, id add some money for them too. Save ya shipping- ill come get it all. $850 for all of it picked up?
Posted via Mobile Device

**DaHos** · 07-08-2012, 08:07 AM

Interested in a package deal on the following items..........

The upper and lower a-arms w new cross shafts and bushings and ball joints.
New rotors and calipers and brake pads.
CPP lowering kit, 4 rear/2 front, with correct lowering shock.
Brake booster for disc front/drum rear w/portioning valve.
CPP tubular transmission mount.
CPP tubular motor mounts.
CPP rear pan hard bar.
CPP fuel sending unit.
CPP in bed fuel fill w/ clamps and hose.
Stainless steel braided transmission dipstick tube.
CPP trailing arm u-bolts.
Box full of new heater parts.
Headers, ceramic coated w/ 3/8 flanges.

shipping to 48867.
D'

Robert Paul Thomas · 07-08-2012, 09:16 PM

interested in stock glovebox door pending pics if available

JonFrankMc · 07-08-2012, 10:27 PM

PM incoming

rusty67 · 07-14-2012, 03:22 AM

Parts still for sale?
Posted via Mobile Device

jwodahl · 07-14-2012, 09:43 AM

can you take some pics of the core support under the battery area? and also a quote on drivers fendr.. thanks..

07-04-2012, 09:15 AM	#53
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: 1967 SWB Project / Part out Good morning, In the description you mentioned that youd like to sell the chassis complete with all parts. You stated price, is that with the new parts? Id like to see it, If you would PM me your phone or address so I can see it. Im just about a mile south and 2 east of bolivar. Thanks,,steve __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

07-04-2012, 05:14 PM	#55
MidWest72C10 Registered User Join Date: Apr 2012 Location: San Diego,Ca/Moran,KS Posts: 62	Re: 1967 SWB Project / Part out as long as everything is there for the one piece window i will go ahead and take them for $400 shipped __________________ Scott Daily Driver:2010 Z71 Ext Cab Project:1972 C10 SWB

07-04-2012, 06:52 PM	#57
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: 1967 SWB Project / Part out nice lookin parts, ttt

07-04-2012, 07:58 PM	#58
MidWest72C10 Registered User Join Date: Apr 2012 Location: San Diego,Ca/Moran,KS Posts: 62	Re: 1967 SWB Project / Part out pp sent __________________ Scott Daily Driver:2010 Z71 Ext Cab Project:1972 C10 SWB

07-04-2012, 11:31 PM	#59
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 1967 SWB Project / Part out will you do 150 shipped on the headers? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

07-05-2012, 08:12 AM	#61
Terrell_Extremes Registered User Join Date: Nov 2011 Location: Bolivar Missouri Posts: 39	Re: 1967 SWB Project / Part out Midwest72c10 has bought the 1 piece window kit. Window kit sold. Thanks midwest72c10. Posted via Mobile Device

07-05-2012, 10:20 AM	#64
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: 1967 SWB Project / Part out Is the brake booster set up for disc/drum or disc/disc? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

07-05-2012, 04:56 PM	#66
cinci00si Registered User Join Date: Apr 2009 Location: Columbus Posts: 3	Re: 1967 SWB Project / Part out Is the Hood still available? How much if so?

07-05-2012, 05:36 PM	#69
Terrell_Extremes Registered User Join Date: Nov 2011 Location: Bolivar Missouri Posts: 39	Re: 1967 SWB Project / Part out No rot. I havent seen any dents Below is only other pic that I got at moment. I will get 1 of inside of hood tomorrow and post. Attached Images

07-06-2012, 05:18 PM	#70
rusty67 Registered User Join Date: May 2012 Location: Dallas, TX Posts: 57	Re: 1967 SWB Project / Part out Dude I'll do a combo deal on the bed without the tailgate, aluminum dash panel with all the gauges, and if you still havent sold the headers on here, id add some money for them too. Save ya shipping- ill come get it all. $850 for all of it picked up? Posted via Mobile Device Last edited by rusty67; 07-07-2012 at 12:31 PM.

07-08-2012, 08:07 AM	#71
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: 1967 SWB Project / Part out Interested in a package deal on the following items.......... The upper and lower a-arms w new cross shafts and bushings and ball joints. New rotors and calipers and brake pads. CPP lowering kit, 4 rear/2 front, with correct lowering shock. Brake booster for disc front/drum rear w/portioning valve. CPP tubular transmission mount. CPP tubular motor mounts. CPP rear pan hard bar. CPP fuel sending unit. CPP in bed fuel fill w/ clamps and hose. Stainless steel braided transmission dipstick tube. CPP trailing arm u-bolts. Box full of new heater parts. Headers, ceramic coated w/ 3/8 flanges. shipping to 48867. D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

07-08-2012, 09:16 PM	#72
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 1967 SWB Project / Part out interested in stock glovebox door pending pics if available

07-08-2012, 10:27 PM	#73
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: 1967 SWB Project / Part out PM incoming

07-14-2012, 03:22 AM	#74
rusty67 Registered User Join Date: May 2012 Location: Dallas, TX Posts: 57	Re: 1967 SWB Project / Part out Parts still for sale? Posted via Mobile Device

07-14-2012, 09:43 AM	#75
jwodahl Registered User Join Date: Jun 2012 Location: crosby, tx Posts: 114	Re: 1967 SWB Project / Part out can you take some pics of the core support under the battery area? and also a quote on drivers fendr.. thanks..



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.