TX parting out 72 longhorn cab and pieces

[birdistheword]

Do you have any side toolbox doors?

[In The Ten Ring]

Hey man, one more thing.

Since you were able to cut out the passenger side of the firewall there for that one fellow....could you cut out the same for me, but the other side?

I'll try and get pics tomorrow of what I have in mind and get an online account to post those from. I have some rust there and when/if I get around to a frameoff, it would be great to already have that part.

THANKS!

[tlcrz1972]

I'm asking $175.00 for each side.

And I doubt I'll deal with trying to ship these behmoths, So you'll have to come pick them up.

Originally Posted by kdubya68

How much are you asking for the bedsides?

[tlcrz1972]

Yes I still have the LH inner fender, it is in good shape, but I'll check it out tomorrow throughly and verify the condition.

Yes it should fit a 1/2 ton and it is a power steering truck so there should be no problems there, plus I believe there is not any difference between power steering and non-ps inner fenders.

I'll have to see who can handle such a bulky item and how much shipping would be. I'm not set up to ship so I don't know all the size requirements.

Thanks for inquiring Brian

Originally Posted by In The Ten Ring

Do you still have the driver's side front inner fender?

Yours looks pretty rust free.....would yours fit a 1972 Chevy 1/2 ton?

Would it also work with power steering?

I'm rather new at this sort of thing but my inner front fenders are pretty rusty!

My zipcode is 25832.

[tlcrz1972]

No I don't, sorry.

Originally Posted by birdistheword

Do you have any side toolbox doors?

[tlcrz1972]

I sure can, get me a picture so I know exactly what you need. And I'm sure I'll cut it large just to give you plenty to work with.

Originally Posted by In The Ten Ring

Hey man, one more thing.

Since you were able to cut out the passenger side of the firewall there for that one fellow....could you cut out the same for me, but the other side?

I'll try and get pics tomorrow of what I have in mind and get an online account to post those from. I have some rust there and when/if I get around to a frameoff, it would be great to already have that part.

THANKS!

[In The Ten Ring]

Great man, thanks.

I was too busy today to take a pic of my firewall rust area but I'll try again tomorrow.

Shipping on an inner fender would be difficult for sure; getting it to me without being bent up would be tough. If you are willing to go through with it, I'm sure we can figure out some way to do it as I don't think I'll be able to pick anything up in person!

[boynton]

Side markers to 76571 also do you have the fronts?
Posted via Mobile Device

[KMC3420]

Originally Posted by tlcrz1972

Yes I have one, it appears to be in good shape, I assume you are wanting it with the pivot shaft?

I'll sell it for $65.00 plus mailing cost.

Man you not far from one of my favorite motorcycling areas, (just North of Russellville, called Brock Creek)
Too bad for me, I'm not planning a trip up there any time soon.

Thanks for inquiring Brian

Brian, would you do $70 total?

[tlcrz1972]

I have one front (amber) and one rear (red)

condition is good, but they need some tlc to make them look correct.

I could send them to you for $20.00

Originally Posted by boynton

Side markers to 76571 also do you have the fronts?
Posted via Mobile Device

[tlcrz1972]

I'll do it with shipping for $75.00 total

Originally Posted by KMC3420

Brian, would you do $70 total?

[Hard_Rain420]

If 6t727t2 passed on the patch panel above the heater box I'd be interested in it. How much shipped? I'll need to check the location of my bad area. My truck is a 69. Is the 72 patch panel the similar to the 69?

Thanks,

Rich

[Hard_Rain420]

Oh yeah! shipped to 32906

[tlcrz1972]

Rich,

To the best of my knowledge they should be the same.

I'll give him a few more days to respond.

l8tr

Originally Posted by Hard_Rain420

If 6t727t2 passed on the patch panel above the heater box I'd be interested in it. How much shipped? I'll need to check the location of my bad area. My truck is a 69. Is the 72 patch panel the similar to the 69?

Thanks,

Rich

[KMC3420]

Originally Posted by tlcrz1972

I'll do it with shipping for $75.00 total

Ill pass on the control arm. Thanks though.
Posted via Mobile Device

[In The Ten Ring]

I did send the email with the firewall pic.

While we are at it, what are the cab corners and rocker panels like?

ITTR

[tlcrz1972]

Sorry I didn't receive an e-mail with pictures.

Sorry no cab corners or rockers, the cab is cut in half. go look at my pictures in this post.

Originally Posted by In The Ten Ring

I did send the email with the firewall pic.

While we are at it, what are the cab corners and rocker panels like?

ITTR

[In The Ten Ring]

Didn't get the pic? I'll try to email again today.....if my friend comes over to help with the truck tomorrow, he should be able to send the pic off with his superior phone.

ITTR

[In The Ten Ring]

Didn't get the pic? I'll try to email again today.....if my friend comes over to help with the truck tomorrow, he should be able to send the pic off with his superior phone.

Will check with the local Fastenal tomorrow when I'm able to get out. Was typing an 8 page paper all day (and all night) Saturday!

ITTR

[lewisja]

How much for the yellow cab?

[tlcrz1972]

I'm sorry there isn't much left of the cab, Look at some of the pictures on page 2. The whole back half is gone.
I'm in the process of cutting out patch panels and sending them out.

Originally Posted by lewisja

How much for the yellow cab?

[tlcrz1972]

Here are the pictures of the cowl piece I cut out for you.

Originally Posted by In The Ten Ring

Didn't get the pic? I'll try to email again today.....if my friend comes over to help with the truck tomorrow, he should be able to send the pic off with his superior phone.

Will check with the local Fastenal tomorrow when I'm able to get out. Was typing an 8 page paper all day (and all night) Saturday!

ITTR

[6t727t2]

I should have asked when I got the other piece from you, but, do you have a nice patch for this, pass side? Thanks

[tlcrz1972]

I have both sides of that cowl area, in a cab that is already in the salvage trailer, luckily it is no buried yet.

Originally Posted by 6t727t2

I should have asked when I got the other piece from you, but, do you have a nice patch for this, pass side? Thanks

[6t727t2]

Ok, would be great if you could cut a pp