MO 64 C20 Barn Find Parting Out (new listing)

[Mthumphrey]

Do you have a radio or a delete plate? How is the instrument panel & knobs?

[USMilitary]

Originally Posted by Mthumphrey

Do you have a radio or a delete plate? How is the instrument panel & knobs?

Radio was aftermarket and no delete plate. Knobs are the basic black, will get to the dash pics today.

[Mthumphrey]

Originally Posted by USMilitary

Radio was aftermarket and no delete plate. Knobs are the basic black, will get to the dash pics today.

OK. Thanks! I might get those knobs when you have pix and price. Would you sell the front portion of the hood that has the parking lights?

[USMilitary]

Originally Posted by Mthumphrey

OK. Thanks! I might get those knobs when you have pix and price. Would you sell the front portion of the hood that has the parking lights?

I'd sell the turn signals and bezel, but won't split the sheet metal if that's what your asking.

[Sizemore 65]

Did the truck have power brakes?

[Brad54]

Originally Posted by USMilitary

Here are some pics of the rear end. Let me know what on the rear end your interested in.

I'm interested in the helper/overload leaf springs, and the trailing arms.
Or, if not the whole trailing arm, the part that the leaf spring contacts. I THINK it's a separate piece that sandwiches between the trailing arm and the rear end perch.

-Brad

[19Chevy66]

Originally Posted by USMilitary

Here are some pics of the rear end. Let me know what on the rear end your interested in.

I am interested in the axle from brake drum to brake drum. How much and can it be shipped to 46562? Thanks!

[lenguini]

Interested in the drivers vent window,please let me know shape of the vent rubber and felt in the window channel.

Thanks,
Ed.

[USMilitary]

Originally Posted by TBONE1964

You are using this cab, yes? Do you have another cab and how if the area above the windshield? I am looking for a piece on the drivers side just above the windshield if you have a cab you are going to scrap.

I will try to find a photo and post with the section I need highlighted.

Thank you

Tbone, sorry I went to the farm today and my scrap cab has rot in the same area due to the upper cab lights I assume.

[USMilitary]

Originally Posted by Sizemore 65

Did the truck have power brakes?

It does have power brakes, removed the booster assembly today. Will get the pics tomorrow.

[USMilitary]

Originally Posted by Brad54

I'm interested in the helper/overload leaf springs, and the trailing arms.
Or, if not the whole trailing arm, the part that the leaf spring contacts. I THINK it's a separate piece that sandwiches between the trailing arm and the rear end perch.

-Brad

let me see if I can get the overload spring free tonight. I know the plate you are looking for from the trailing arm. I dont think the drivers side one is in good shape, but the pass side should be. I'll work on that as well.

[USMilitary]

Originally Posted by 19Chevy66

I am interested in the axle from brake drum to brake drum. How much and can it be shipped to 46562? Thanks!

I'd do $150.00 on the rear end drum to drum. I'm sure it could be shipped through uship or something, but would probably run $200-300.

[USMilitary]

Originally Posted by lenguini

Interested in the drivers vent window,please let me know shape of the vent rubber and felt in the window channel.

Thanks,
Ed.

I have 2 drivers side vent windows, clemsonchevy has dibs on the first one. The rubber and felt will need to be replaced as usual.

[USMilitary]

dome light, lens and wire 5.00 - one plastic clip broken. (Sold)

66 deluxe instrument panel 80.00

64 instrument panel 80.00 including all deluxe chrome knob and switches (Sold)

second driver vent window assembly 75.00 (Sold)

driver door pivot arm and latch 10.00 (Sold)

[USMilitary]

64 wire harness 50.00 (Pending Sale)
drivor visor 15.00 (SCRAPED)
glove box 15.00 (SCRAPED)
ash tray 10.00 (SCRAPED)
heater box and control assembly 75.00
sail trim panels 60.00 (Sold)

[USMilitary]

rearview mirror 10.00 (SCRAPED)
wiper motor and arms 50.00 (Sold)
steering wheel 30.00 has cracks in the rubber (Pending Sale)
steering column assmebly 75.00 (Pending Sale)

[USMilitary]

rear cab mounts 40.00 after cab is taken off. The rubber doesn't seem to be separted as of yet. Pending further inspection, sorry pictures are dark. Will get better ones once the cab is off.

forward can mounts 40.00 (SCRAPED)
power steering setup 75.00 pump, motor, actuator (PENDING SALE)

[Clyde65]

Originally Posted by USMilitary

pictures are loaded below, taillight bezels were trash, housing are clean and the tail light lens survived. Only one emblem survived as well, Let me what you think.

Ill take the tail light housings please. As long as there isnt any damage.

Shipped to 76140, I can do PP if you like.

[yelmer]

Interested in ps setup will that include all the parts to convert to one thanks

[USMilitary]

Shipping will be $6.15; did you want the 2 tail light lenses? PayPal is smkdnhtl1067@yahoo.com Thanks.

Originally Posted by Clyde65

Ill take the tail light housings please. As long as there isnt any damage.

Shipped to 76140, I can do PP if you like.

[USMilitary]

PS setup will include steering gear, actuator rod assembly,pump and all brackets/hardware that is currently on the truck.

Originally Posted by yelmer

Interested in ps setup will that include all the parts to convert to one thanks

[USMilitary]

Yelmer, someone just pm'd me and said they would take the ps setup.

Originally Posted by yelmer

Interested in ps setup will that include all the parts to convert to one thanks

[Racer2172]

Door locks with Keys? do you still have the headlight bezels?

[deuceman32]

Hello Dave, I will take the upper radiator support brace set, the sail panel trims and the wiper motor with pivots and links. All shipped to 14305 NY. Paypal at the ready. Thanks, Rick.

[yelmer]

Did not see him post? On ps setup