MI 1972 GMC 2500 "Part out" - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 03-31-2014, 09:53 PM

Can I add the support bracket for the brake booster bracket w bolts to my pile ?

Hotrodshovel · 03-31-2014, 10:00 PM

How about the high hump tranny cover? Is it for Sale?

**First c10** · 03-31-2014, 11:31 PM

I have a 1970 c10 that I am working on and the headlight trim rings are in bad shape. Any luck you have a set including screws? If so how much sent to 93635?
Thanks

bshepherd1 · 04-01-2014, 08:35 AM

Where are you in mi? Interested in the steering wheel

**DaHos** · 04-01-2014, 12:42 PM

Quote:

Originally Posted by DeadheadNM

Can I add the support bracket for the brake booster bracket w bolts to my pile ?

$15 I can pull it tonight.

Quote:

Originally Posted by Hotrodshovel

How about the high hump tranny cover? Is it for Sale?

Need to keep it. (I do have a 4sp one available)

Quote:

Originally Posted by First c10

I have a 1970 c10 that I am working on and the headlight trim rings are in bad shape. Any luck you have a set including screws? If so how much sent to 93635?
Thanks

Sale is pending payment, Ill let you know if they become available. I do have 3pr of 69 steel ones though.

Quote:

Originally Posted by bshepherd1

Where are you in mi? Interested in the steering wheel

PM sent.

ScottH - I checked on the trim, I "only" have 5 of them ALL drivers side....

**ScottH** · 04-01-2014, 01:02 PM

Thanks for checking on the trim, gonna pass on the fuel lines.

**First c10** · 04-01-2014, 01:24 PM

Quote:

Originally Posted by DaHos

Sale is pending payment, Ill let you know if they become available. I do have 3pr of 69 steel ones though.

I am looking for the headlight hold down rings that hold the headlight to the headlight bucket. Sorry I didnt think I was clear on what trim piece I needed.
Thanks
Scott

**DaHos** · 04-01-2014, 01:59 PM

Quote:

Originally Posted by First c10

I am looking for the headlight hold down rings that hold the headlight to the headlight bucket. Sorry I didnt think I was clear on what trim piece I needed.
Thanks
Scott

Copy !

I have a few pr of them also, let me check that the tabs are intact. Ill let you know this eve, thx D'.

hogwild99 · 04-01-2014, 06:30 PM

Is the dome light and harness $5?

**DaHos** · 04-01-2014, 06:41 PM

Quote:

Originally Posted by hogwild99

Is the dome light and harness $5?

Yes $5 plus shipping, say $8 its yours.

No lens, just the housing and harness.

**DaHos** · 04-01-2014, 07:08 PM

Quote:

Originally Posted by First c10

I am looking for the headlight hold down rings that hold the headlight to the headlight bucket. Sorry I didnt think I was clear on what trim piece I needed.
Thanks
Scott

Here they are with the correct left and right 69-72 buckets and screw set. $25 shipped

**DaHos** · 04-02-2014, 09:47 AM

BKSS67, deadheadNM and Oddfire.

Parts shipped this am.

**DaHos** · 04-05-2014, 12:14 AM

Weekend bump. thx, D'

resto newbie · 04-05-2014, 10:13 AM

High hump tranny cover?

**DaHos** · 04-05-2014, 10:20 AM

Quote:

Originally Posted by resto newbie

High hump tranny cover?

Need to keep the auto one for my build, I do have a 4spd one available though.

resto newbie · 04-05-2014, 10:22 AM

Quote:

Originally Posted by DaHos

Need to keep the auto one for my build, I do have a 4spd one available though.

Looking for one with no body work required. Thanks!

ClemsonChevy · 04-05-2014, 04:15 PM

Passenger front wheelwell?

**jocko** · 04-05-2014, 08:07 PM

Dave - I could use a set of the hog ring attachment rods from the seat cover... Should be 1 long one and 2 short ones in the seat back and 2 long ones (I think) in the seat bottom. There might be more than that, but I need a whole set.

They are the somewhat bendable, squiggly little metal rods that run through the fabric hoops/tunnels that hold the seat covers onto the frames.

Don't need the seat cover, just those pesky little rods. Like I said, there might be more than I've mentioned used on a single bench seat. Thanks!

hogwild99 · 04-05-2014, 08:53 PM

O.K. I will do the light and harness for $8 dollars. I added the money to my paypal so it will be like two days before I can transfer it to you is that o.k.?

bcrouch · 04-05-2014, 09:22 PM

Needing a 410 rear end for 69 c/30 chevy.

hogwild99 · 04-06-2014, 04:03 PM

can you pm me your pay pal please?

**DaHos** · 04-06-2014, 09:09 PM

Quote:

Originally Posted by ClemsonChevy

Passenger front wheelwell?

Junk.

Quote:

Originally Posted by jocko

Dave - I could use a set of the hog ring attachment rods from the seat cover... Should be 1 long one and 2 short ones in the seat back and 2 long ones (I think) in the seat bottom. There might be more than that, but I need a whole set.

They are the somewhat bendable, squiggly little metal rods that run through the fabric hoops/tunnels that hold the seat covers onto the frames.

Don't need the seat cover, just those pesky little rods. Like I said, there might be more than I've mentioned used on a single bench seat. Thanks!

Its got a square body seat in it, not sure if rods are the same or not, Ill take a peak.

Quote:

Originally Posted by hogwild99

O.K. I will do the light and harness for $8 dollars. I added the money to my paypal so it will be like two days before I can transfer it to you is that o.k.?

No prob.

Quote:

Originally Posted by bcrouch

Needing a 410 rear end for 69 c/30 chevy.

Nope. Rear has been swapped for a 14 bolt.

Quote:

Originally Posted by hogwild99

can you pm me your pay pal please?

PM sent

Also the truck is pretty much stripped down so most items are ready to go. Frame bits also available.

**jocko** · 04-06-2014, 10:45 PM

thanks, standing by!

**ScottH** · 04-07-2014, 12:33 PM

would u sell/ship the seat?

hogwild99 · 04-08-2014, 06:04 PM

Pay pal sent should be in your account!

03-31-2014, 09:53 PM	#51
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: 1972 GMC 2500 "Part out" Can I add the support bracket for the brake booster bracket w bolts to my pile ? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-31-2014, 10:00 PM	#52
Hotrodshovel Registered User Join Date: Mar 2014 Location: Appling, GA Posts: 21	Re: 1972 GMC 2500 "Part out" How about the high hump tranny cover? Is it for Sale?

03-31-2014, 11:31 PM	#53
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: 1972 GMC 2500 "Part out" I have a 1970 c10 that I am working on and the headlight trim rings are in bad shape. Any luck you have a set including screws? If so how much sent to 93635? Thanks __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

04-01-2014, 08:35 AM	#54
bshepherd1 Registered User Join Date: Dec 2013 Location: Addison Michigan Posts: 17	Re: 1972 GMC 2500 "Part out" Where are you in mi? Interested in the steering wheel

04-01-2014, 01:02 PM	#56
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1972 GMC 2500 "Part out" Thanks for checking on the trim, gonna pass on the fuel lines. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-01-2014, 06:30 PM	#59
hogwild99 Registered User Join Date: Mar 2014 Location: moore ok Posts: 79	Re: 1972 GMC 2500 "Part out" Is the dome light and harness $5?

04-02-2014, 09:47 AM	#62
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: 1972 GMC 2500 "Part out" BKSS67, deadheadNM and Oddfire. Parts shipped this am. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

04-05-2014, 12:14 AM	#63
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: 1972 GMC 2500 "Part out" Weekend bump. thx, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

04-05-2014, 10:13 AM	#64
resto newbie Registered User Join Date: Apr 2012 Location: Hartselle, Alabama Posts: 330	Re: 1972 GMC 2500 "Part out" High hump tranny cover? __________________ Chad 1967 Chevy C10 "Project DV8ED" 1994 Nissan 300zx convertible 2004 Chevy 2500HD crew cab 4x4

04-05-2014, 04:15 PM	#67
ClemsonChevy 8 vehicles only 4 that run Join Date: Feb 2006 Location: Clemson, SC Posts: 236	Re: 1972 GMC 2500 "Part out" Passenger front wheelwell? __________________ 95 2500 350 w/ 3.73 72 GMC 1500 SWB stepside 65 Chevy C10 SWB stepside 72 Chevy C10 LWB fleetside

04-05-2014, 08:07 PM	#68
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: 1972 GMC 2500 "Part out" Dave - I could use a set of the hog ring attachment rods from the seat cover... Should be 1 long one and 2 short ones in the seat back and 2 long ones (I think) in the seat bottom. There might be more than that, but I need a whole set. They are the somewhat bendable, squiggly little metal rods that run through the fabric hoops/tunnels that hold the seat covers onto the frames. Don't need the seat cover, just those pesky little rods. Like I said, there might be more than I've mentioned used on a single bench seat. Thanks!

04-05-2014, 08:53 PM	#69
hogwild99 Registered User Join Date: Mar 2014 Location: moore ok Posts: 79	Re: 1972 GMC 2500 "Part out" O.K. I will do the light and harness for $8 dollars. I added the money to my paypal so it will be like two days before I can transfer it to you is that o.k.?

04-05-2014, 09:22 PM	#70
bcrouch Registered User Join Date: Feb 2013 Location: wartburg tennessee Posts: 17	Re: 1972 GMC 2500 "Part out" Needing a 410 rear end for 69 c/30 chevy.

04-06-2014, 04:03 PM	#71
hogwild99 Registered User Join Date: Mar 2014 Location: moore ok Posts: 79	Re: 1972 GMC 2500 "Part out" can you pm me your pay pal please?

04-06-2014, 10:45 PM	#73
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: 1972 GMC 2500 "Part out" thanks, standing by! Last edited by jocko; 04-21-2014 at 07:18 PM.



Register or Log In To remove these advertisements.

04-07-2014, 12:33 PM	#74
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1972 GMC 2500 "Part out" would u sell/ship the seat? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-08-2014, 06:04 PM	#75
hogwild99 Registered User Join Date: Mar 2014 Location: moore ok Posts: 79	Re: 1972 GMC 2500 "Part out" Pay pal sent should be in your account!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.