MO Parting out 67 C20, very well optioned. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 10-31-2017, 01:11 PM

Quote:

Originally Posted by Never enough

Are the hood hinges in good condition and not sloppy/bent ?
Better pics ?
If good, I would take them, even a single left, if the right isn't good.
Thanks.

Let me get you some pics this evening. Thanks, Fred.

Never enough · 10-31-2017, 10:37 PM

Quote:

Originally Posted by Never enough

Are the hood hinges in good condition and not sloppy/bent ?
Better pics ?
If good, I would take them, even a single left, if the right isn't good.
Thanks.

Quote:

Originally Posted by specialtyretail

Let me get you some pics this evening. Thanks, Fred.

?? Also, if the high hump is no good, I'd like the attaching screws...condition/price ?

**specialtyretail** · 10-31-2017, 11:13 PM

I got some pics of the hinges, will post themthem in the morning. The hump is good, I have it listed on here. Thanks, Fred.

Never enough · 10-31-2017, 11:29 PM

Quote:

Originally Posted by specialtyretail

I got some pics of the hinges, will post themthem in the morning. The hump is good, I have it listed on here. Thanks, Fred.

10-4, go to bed...

I am

**specialtyretail** · 11-01-2017, 08:01 AM

Quote:

Originally Posted by Never enough

10-4, go to bed...

I am

SOLD,,,, THA NKS.... Let me get these posted before I head to work. Thanks, Fred.

Never enough · 11-01-2017, 08:23 AM

Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...

**Grumpy old man** · 11-01-2017, 08:37 AM

Interested in the 4 speed column , When your ready to pull it ?

projectking · 11-01-2017, 08:57 AM

Drivers side vent window if it's non tinted glass and you actually have it?

**specialtyretail** · 11-01-2017, 11:01 AM

Quote:

Originally Posted by Never enough

Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...

They are yours. Sorry, no interior door stuff at all. Thanks, Fred.

**specialtyretail** · 11-01-2017, 11:56 AM

Quote:

Originally Posted by projectking

Drivers side vent window if it's non tinted glass and you actually have it?

Sorry, no door internals at all. Thanks, Fred.

Never enough · 11-01-2017, 12:03 PM

Quote:

Originally Posted by specialtyretail

Sorry, no door internals at all. Thanks, Fred.

OK, funds sent.
Any decision on the center A/C vent before you ship ?

Myoldtruck · 11-01-2017, 01:00 PM

Im still in it for the a/c dash vents.

**specialtyretail** · 11-01-2017, 01:18 PM

Quote:

Originally Posted by Myoldtruck

Im still in it for the a/c dash vents.

Yes, you are. i just had a lot going on last night and did not get out to the shop. Should have some info for you tonight. Thanks, Fred.

greywurm · 11-02-2017, 12:03 PM

Do you have this style carrier bearing mount? I believe it's for manual transmission drive shafts.

chuckmc8 · 11-03-2017, 05:31 AM

Fred, Do you have a nice 67 rearview mirror head?

**specialtyretail** · 11-04-2017, 08:44 AM

Quote:

Originally Posted by Grumpy old man

Interested in the 4 speed column , When your ready to pull it ?

I have a local wanting the column bowl. Also, you do know that the 67 - 68 is the impaler shaft, one solid shaft from the gear box to the steering wheel. Thanks, Fred.

**specialtyretail** · 11-04-2017, 08:47 AM

Quote:

Originally Posted by chuckmc8

Fred, Do you have a nice 67 rearview mirror head?

This what came out of it. It has the typical checking and hazing, needs a good cleaning. If you can use it, $12.00 shipped. Thanks, Fred.

**specialtyretail** · 11-04-2017, 10:10 AM

Quote:

Originally Posted by Myoldtruck

How about the a/c vent in the center of the dash with all plastic thats behind it that connects to the vent tubing. Also the electric plug and some wiring that connects to the heater/ac control switch. Are the outer a/c vents still available. Zip 19540

SOLD,,,, THANKS.... Just got these pulled. They need a good cleaning. The center vent moves freely, the outside ones are very tight. $42.00 shipped for all three, includes screws. Thanks, Fred.

Perpendicular · 11-04-2017, 11:47 AM

Rear bumper brackets available? If so, how much shipped to 23432?

-Paul

**specialtyretail** · 11-04-2017, 12:01 PM

Quote:

Originally Posted by Perpendicular

Rear bumper brackets available? If so, how much shipped to 23432?

-Paul

Sorry, no rear bumper brackets. Thanks, Fred.

Myoldtruck · 11-04-2017, 04:44 PM

Money sent for the a/c vents, thank you.

**specialtyretail** · 11-04-2017, 05:41 PM

Quote:

Originally Posted by Myoldtruck

Money sent for the a/c vents, thank you.

Going out Monday. Thanks, Fred.

**specialtyretail** · 11-06-2017, 06:06 PM

Probably going to do a radio repair panel cut out of the dash if anyone needs it. Thanks, Fred.

Azmxdad · 11-06-2017, 10:16 PM

How much for the clutch pedal shipped to 85741?

**specialtyretail** · 11-06-2017, 10:55 PM

Quote:

Originally Posted by Azmxdad

How much for the clutch pedal shipped to 85741?

$65.00 for the assembly, shipped. Thanks, Fred.

10-31-2017, 11:13 PM	#53
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 C20, very well optioned. I got some pics of the hinges, will post themthem in the morning. The hump is good, I have it listed on here. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-01-2017, 08:23 AM	#56
Never enough Registered User Join Date: May 2010 Location: Stillwater, MN Posts: 94	Re: Parting out 67 C20, very well optioned. Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69. If you pull the springs and fold the hinges, they fit in a much smaller box... __________________ 1969 Chev C10 1989 Chev R3500

11-01-2017, 08:37 AM	#57
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Parting out 67 C20, very well optioned. Interested in the 4 speed column , When your ready to pull it ?

11-01-2017, 08:57 AM	#58
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 67 C20, very well optioned. Drivers side vent window if it's non tinted glass and you actually have it? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

11-01-2017, 01:00 PM	#62
Myoldtruck Registered User Join Date: Sep 2015 Location: Mohnton pa. Posts: 208	Re: Parting out 67 C20, very well optioned. Im still in it for the a/c dash vents.

11-02-2017, 12:03 PM	#64
greywurm Registered User Join Date: Jun 2014 Location: Temecula Posts: 227	Re: Parting out 67 C20, very well optioned. Do you have this style carrier bearing mount? I believe it's for manual transmission drive shafts. Attached Images __________________ 71 Long bed C10 w/68 front clip, 350 SBC+HEI, TH350 06 Yukon XL Denali - Stock

11-03-2017, 05:31 AM	#65
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting out 67 C20, very well optioned. Fred, Do you have a nice 67 rearview mirror head? __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

11-04-2017, 11:47 AM	#69
Perpendicular Registered User Join Date: May 2017 Location: Elgin, TX Posts: 322	Re: Parting out 67 C20, very well optioned. Rear bumper brackets available? If so, how much shipped to 23432? -Paul

11-04-2017, 04:44 PM	#71
Myoldtruck Registered User Join Date: Sep 2015 Location: Mohnton pa. Posts: 208	Re: Parting out 67 C20, very well optioned. Money sent for the a/c vents, thank you.

11-06-2017, 06:06 PM	#73
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 C20, very well optioned. Probably going to do a radio repair panel cut out of the dash if anyone needs it. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-06-2017, 10:16 PM	#74
Azmxdad Registered User Join Date: Apr 2016 Location: TUCSON Posts: 20	Re: Parting out 67 C20, very well optioned. How much for the clutch pedal shipped to 85741?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.