Repro and nos stuff that is left!!!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wootdog · 12-25-2003, 11:10 PM

Randy,
Need two rear view mirror assemblies and gaskets. Need the whole Emergency brake cable setup for a 67. Check to see if you have a non auto tilt. And last but not least, the heat shield material for the engine compartment. Shipping will be to 23462. Thanks Wootdog

teeitup · 12-25-2003, 11:17 PM

On the rear view mirrors what gaskets? No emergency brake stuff. Sold all the tilts. I'm not sure what your talking about on the heat shield material? Thanks Randy

Wootdog · 12-25-2003, 11:19 PM

I have heard it referred to as heat shield material. when I have bought mrirors in the past I also bought gaskets for between them and the truck. do you have any speedometer cables alsp?
Wootdog

teeitup · 12-26-2003, 03:00 AM

No heat shield material I got the firewall padding for inside cab for the firewall, are you wanting door mirror brackets, they have gaskets, rear view mirrors do not. I have new door mirror brackets and gaskets. No good cables. Thanks Randy

Wootdog · 12-26-2003, 10:02 AM

Randy,
1. Do you have the brackets, gaskets, and mirrors? If so I would like total price for two.
2.The inside cab stuff you are talking about.
3. One parking light lense.
4. Do you have any good chrome bumpers (67-68) rear would be a stepside, braces, mounting hardware?
5.Mounts and hardware for stepside tail lights?

I just need alot of stuff for my 67 stepside project. Shipping to 23462 Virginia Beach, Virginia.

Thanks,
Kerry (Wootdog)

teeitup · 12-26-2003, 10:20 AM

Kerry, I think I have the brackets for the mirrors but they would be used. I only have one new mirror.
New inside firewall pad
NOS parklens
I got the mounting brckets for the rear bumper and a bumper but I need to see if UPS would ship the bumper
I got some used taillight stuff.
I have to work today, let me look tomorrow for everything and I'll get back with you.
Thanks so much Randy

Wootdog · 12-26-2003, 10:46 AM

Thanks Randy

sdredneck · 12-26-2003, 04:08 PM

Do you have any exterior badges for a 68 gmc 3/4 ton camper special? Also if you have a full set of weatherstripping for the doors let me know the total with approximate shipping to 92139

teeitup · 12-26-2003, 08:06 PM

Kerry, I'm pm'ing you soon.
sdredneck, no badges, I have the cab to door seals for $25 plus shipping, probably 7-8 dollars to ship. Thanks let me know Randy

69 air cab · 12-26-2003, 10:00 PM

Randy,
What wiring do you have for a 69 C-10 SWB 350, A/C and prices?
Also, what A/C parts do you have and prices?
Thanks
Bill

teeitup · 12-27-2003, 12:02 AM

Bill, I probably got the under dash ac wiring but it would be used. I got ac brackets too. I'll pm you. Thanks Randy

cnshoot · 12-27-2003, 01:30 AM

sent pm

pa_snowman · 12-28-2003, 11:53 AM

Do you have a set of cab mount bushings for a 67? if so what do you want for them?

teeitup · 12-28-2003, 11:58 AM

Sorry none of those, thanks Randy

**JDL** · 12-28-2003, 09:32 PM

Randy I need firewall padding, Door seals, and both 72 turn singnel parklens and a engin harnes if you still have it.
Jim

teeitup · 12-28-2003, 09:41 PM

Jim, I got the firewall padding $35, door seals $25, right hand turn signal lens $12, and a engine harness $25 yet. All plus shipping. Thanks let me know Randy

69 air cab · 12-28-2003, 09:45 PM

Randy,
will the engine harness you have fit a 69 C10 and is it new?
thanks
Bill

**JDL** · 12-28-2003, 10:08 PM

sent pm

tphsmith · 12-28-2003, 10:39 PM

there is a chrome ribbed or finned oil pan what ever you call it, is it for a small block oil stick on the passenger side? umm whatelse A'm I to ask, well anyways will it fit a small block with dip stick on passenger side , how much and shipping to Charlotte 28273 ?

teeitup · 12-28-2003, 11:06 PM

I already sold it, sorry. Thanks Randy

68lwb · 12-29-2003, 11:35 AM

Looking for new or NOS dash bezel for my truck. It does not have factory gauges, but does have a manual choke. Would you have anything?

Pilgrim · 12-29-2003, 09:57 PM

Sent PM.

teeitup · 12-30-2003, 01:11 AM

68lwb, sorry none of those
Pilgrim, I pm'd you
Thanks Randy

alta-aj · 12-31-2003, 03:00 AM

Randy, any chance you have a maroon steering wheel?

tomsC10R · 12-31-2003, 03:16 AM

Randy,

"I got bezels 67-68 for $25"

Are those the ones in the picture? If so, what would shipping be to 54473.

Thanks

12-25-2003, 11:10 PM	#51
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	Mirrors and more? Randy, Need two rear view mirror assemblies and gaskets. Need the whole Emergency brake cable setup for a 67. Check to see if you have a non auto tilt. And last but not least, the heat shield material for the engine compartment. Shipping will be to 23462. Thanks Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

12-25-2003, 11:17 PM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	On the rear view mirrors what gaskets? No emergency brake stuff. Sold all the tilts. I'm not sure what your talking about on the heat shield material? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-25-2003, 11:19 PM	#53
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	Firewall pad I have heard it referred to as heat shield material. when I have bought mrirors in the past I also bought gaskets for between them and the truck. do you have any speedometer cables alsp? Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

12-26-2003, 03:00 AM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	No heat shield material I got the firewall padding for inside cab for the firewall, are you wanting door mirror brackets, they have gaskets, rear view mirrors do not. I have new door mirror brackets and gaskets. No good cables. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-26-2003, 10:02 AM	#55
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	Reply Randy, 1. Do you have the brackets, gaskets, and mirrors? If so I would like total price for two. 2.The inside cab stuff you are talking about. 3. One parking light lense. 4. Do you have any good chrome bumpers (67-68) rear would be a stepside, braces, mounting hardware? 5.Mounts and hardware for stepside tail lights? I just need alot of stuff for my 67 stepside project. Shipping to 23462 Virginia Beach, Virginia. Thanks, Kerry (Wootdog) __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

12-26-2003, 10:20 AM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Kerry, I think I have the brackets for the mirrors but they would be used. I only have one new mirror. New inside firewall pad NOS parklens I got the mounting brckets for the rear bumper and a bumper but I need to see if UPS would ship the bumper I got some used taillight stuff. I have to work today, let me look tomorrow for everything and I'll get back with you. Thanks so much Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2003 at 10:24 AM.

12-26-2003, 10:46 AM	#57
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	I will be waiting Kerry Thanks Randy __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

12-26-2003, 04:08 PM	#58
sdredneck The Crazy Kracka Join Date: Dec 2003 Location: San Diego, Ca Posts: 60	Do you have any exterior badges for a 68 gmc 3/4 ton camper special? Also if you have a full set of weatherstripping for the doors let me know the total with approximate shipping to 92139

12-26-2003, 08:06 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Kerry, I'm pm'ing you soon. sdredneck, no badges, I have the cab to door seals for $25 plus shipping, probably 7-8 dollars to ship. Thanks let me know Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-26-2003, 10:00 PM	#60
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Randy, What wiring do you have for a 69 C-10 SWB 350, A/C and prices? Also, what A/C parts do you have and prices? Thanks Bill

12-27-2003, 12:02 AM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Bill, I probably got the under dash ac wiring but it would be used. I got ac brackets too. I'll pm you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-27-2003, 01:30 AM	#62
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	sent pm __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

12-28-2003, 11:53 AM	#63
pa_snowman Registered User Join Date: Aug 2003 Location: Meyersdale, PA Posts: 144	Do you have a set of cab mount bushings for a 67? if so what do you want for them? __________________ jim gallagher

12-28-2003, 11:58 AM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Sorry none of those, thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2003, 09:32 PM	#65
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	Randy I need firewall padding, Door seals, and both 72 turn singnel parklens and a engin harnes if you still have it. Jim __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa



Register or Log In To remove these advertisements.

12-28-2003, 09:41 PM	#66
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Jim, I got the firewall padding $35, door seals $25, right hand turn signal lens $12, and a engine harness $25 yet. All plus shipping. Thanks let me know Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2003, 09:45 PM	#67
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Randy, will the engine harness you have fit a 69 C10 and is it new? thanks Bill

12-28-2003, 10:08 PM	#68
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	sent pm __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

12-28-2003, 10:39 PM	#69
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	there is a chrome ribbed or finned oil pan what ever you call it, is it for a small block oil stick on the passenger side? umm whatelse A'm I to ask, well anyways will it fit a small block with dip stick on passenger side , how much and shipping to Charlotte 28273 ?

12-28-2003, 11:06 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I already sold it, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-29-2003, 11:35 AM	#71
68lwb Registered User Join Date: Dec 2003 Location: Northern Indiana Posts: 85	Looking for new or NOS dash bezel for my truck. It does not have factory gauges, but does have a manual choke. Would you have anything?

12-29-2003, 09:57 PM	#72
Pilgrim Registered User Join Date: Mar 2003 Location: Crescent City, FL Posts: 492	Sent PM. __________________ Bob 68 C20 Camper Special

12-30-2003, 01:11 AM	#73
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	68lwb, sorry none of those Pilgrim, I pm'd you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-31-2003, 03:00 AM	#74
alta-aj Registered User Join Date: Aug 2001 Location: Qualicum Beach, B.C>, Canada Posts: 117	Randy, any chance you have a maroon steering wheel?

12-31-2003, 03:16 AM	#75
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Randy, "I got bezels 67-68 for $25" Are those the ones in the picture? If so, what would shipping be to 54473. Thanks __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode