KS Christmas BONANZA ALOT of 67-72 truck parts!!

[teeitup]

sorry no manual columns right now. Thanks Randy

[teeitup]

AZ72, I have all but one of the brackets in the set, I'm missing the bracket that goes from intake bracket to compressor.

[teeitup]

Everyone, After the snow melts I will start a new thread for everyone to see what I have left, there is still alot out there. Thanks Randy

[German_AC]

Hi Randy, I'm looking for a tilt auto column. Do you have some? If so, send me some pictures please.

Thank you!

[teeitup]

Sorry, no tilts right now, Thanks Randy

[Eddie Wickward]

Picture #24 you have half a cover for A/C evaporator that has a vacuum canister on it. Will you take $10.00 plus shipping for the cover with canister to area code 99224?

[teeitup]

Sorry already sold it, Thanks Randy

[sub1969]

I nee3d a steering colum floor shift shipped to minnesota.. 612-991-8144

[jkeating1]

Randy: however is the easiest way to price this & communicate it, let me know--I know I'll take a bunch of the stuff. My zip is 75049. JK

pic#
2--- 72 front bumper; (1) 8 350 fender emblem
8--- breather for small block 4 bbl
9--- valve cover (1) single hole; clutch & brake pedal
19--- 72 molding, lower, rt rear, long bed; 72 moldings tailgate (3)--L, R, & over tg handle); 72 Cheyenne TG molding "CHEVROLET" band (not pictured, but have one?); 72 left taillight surround
20--- 72 left & right outside door handles; left & right door sill trim
22--- green left & right a/c bezels (without balls)
25--- tachometer (how big, and is it working?)
33--- aux gas fill door (just curious how much on this)
34--- (1) red 72 cheyenne side marker light with stnls trim
37--- “chevrolet” letters (are these for tailgate band?)
38--- short column shift lever; (2) green visor clips
39--- 5 speed shifter knob (c60?); stainless capped bumper bolts (2)

ALSO NEED---
72 ‘cheyenne 30’ fender emb (or custom, cheyenne super)
72 horizontal brackets for stainless below eyeline c20 mirror (not the big tripod ones)—

[teeitup]

sub1969, sorry no manual columns right now

jkeating1, I have some of it but not all

have one 350 emblem
might have a 4 barrell air cleaner, need to look
have clutch brake pedal setup
have valve cover
might have door handles
might have Ac vents
have red side marker
have gas filler door
have some tailgate letters
have short shifter lever
have green visor clips
might have bumper bolts
I will be able to go out there Thurs after work and get pics of what I do have off your list
Thanks Randy

[jkeating1]

Ok. Thx Randy. JK
Posted via Mobile Device

[Jeezyjh]

Hi I was wondering if you have some parts that I'm looking for
Both side tailgate weatherstrip hold downs
Complete top dome light wire harness
An the top hatch lock handle with key
Maybe asking for too much
For a 72 blazer thanks
Posted via Mobile Device

[teeitup]

jeezyjh, sorry none of that right now. Thnaks Randy

[teeitup]

jkeating1, John, I will have pics after work today for sure. Thanks Randy

[jkeating1]

Ok--I appreciate it!
Posted via Mobile Device

[teeitup]

Here ya go John, air cleaner has some surface rust inside and inner ring needs a little straightening. One AC vent has broken tabs, other one has been hot on edge. Door handles have some scratches. Gate letters have some pitting. Short shifter handle has some surface rust, but not bad. Gas filler door is painted white and the hinges need poprivets. Rear taillight lens chrome has a few smal dings but chrome is shiney. Look at all pics, let me know what you'd be interested in and I'll group price to you. Thanks Randy

[teeitup]

pic 34

[teeitup]

pic 39

[teeitup]

pic 44

[Leroy-B1]

Do you still have the 10 inch wide steel wheels and the blue 67 belts?
Posted via Mobile Device

[jkeating1]

Randy--this would be stuff would work for me, and comments/question on other below:
Bumper bolts
Visor clips
Shift lever
Side marker light
Clutch/brake pedals
Taillight bezel
Door handles

On the AC bezels, if you have some black ones that are straight, that would be ok

On the breather and the valve cover, I know you'd be fair on the price, but I'm thinking what they would add to the shipping might not be worth it. You think?

On the letters, that would be for my "good" truck, so I'll try to find some without pitting.

On the fuel door, I really don't have a use for it at the moment, it just seems like it would be good for something (besides its intended use). But I'll pass.

Thanks Randy, JK

[teeitup]

Leroyb-1, sorry rims and belts have been sold

John, the air cleaner would be $10, it wouldn't add much on shipping, the clutch and brake pedal setup is going to take a bigger box anyway. I will look today on black Ac vents, I know I have some just not sure condition

Thanks Randy

[pritch]

Randy, do you happen to have a set of sway bar brackets? I have the bar, but that's all.
Thanks, Pritch

[teeitup]

Sorry I don't have any separate brackets right now, Thanks Randy

[pritch]

Oh well. Just thought I'd ask.

Thanks,
Pritch