How about some pics of your 4x4 - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Conroe trucker · 09-09-2009, 10:33 PM

If you do not mind....
How much lift and what size tires are those?

onlyifihadachevy · 09-09-2009, 10:49 PM

LIke your truck but is it going to make it out the garage? And I am pretty sure, those are the 35in boggers with a 6in lift because it looks pretty much like the stance mines has.

barthmonster · 09-09-2009, 10:52 PM

he can 'air-down' like the off-roaders to get in and out of the garage...

onlyifihadachevy · 09-09-2009, 11:07 PM

Sorry for messing up your pic but I think he just barely would make it if he does, see the pink lines. The white is what my truck will look like when i'm done its the exo. I bad version but similar.

19704x4 · 09-10-2009, 10:33 AM

I have a set of steel wheels with no rubber im going to use to get it out. Yep 6 with 35/16/16 boggers 14 boltff with detroit locker hd dana 44 up front with 410s

onlyifihadachevy · 09-10-2009, 06:26 PM

Same as mine its a 6 with 35/16/16.5, with a 10b and lock eaton

19704x4 · 09-10-2009, 09:05 PM

sweet. i did a disc conversion on the rear and i am using a hydroboost master cylinder to run 4 wheel disc brakes

moharleyrider · 09-10-2009, 10:35 PM

Hey, new to the sight and thought I'd throw my rides on here.

1979 Scottsdale, 454 cid, Edelbrock carb and intake, TH350, 10 bolt front, 14 bolt FF rear, 36" super swampers.

Ok, this other is a Jeep but it does have a Chevy 350 in it.

onlyifihadachevy · 09-10-2009, 11:21 PM

It is site, but welcome and nice truck. The jeeps cool too, if you have any pic of them wheeling post it in the 4x4 action pic thread.
But i'm wondering why you put a chevy 350 and not a 302 in it, someone said it took less almost bolt in a 302 into his jeep, than a 350.

moharleyrider · 09-11-2009, 08:29 AM

Quote:

Originally Posted by onlyifihadachevy

It is site, but welcome and nice truck. The jeeps cool too, if you have any pic of them wheeling post it in the 4x4 action pic thread.
But i'm wondering why you put a chevy 350 and not a 302 in it, someone said it took less almost bolt in a 302 into his jeep, than a 350.

The 350 was already in it when I bought it and it runs like a champ!

el cocho · 09-20-2009, 01:55 PM

heres my 81 gmc 3/4t longbed 4x4
468 bbc (550hp)
turbo 400
6" lift
20" american racing wheels
37" nitto's

whistler · 09-21-2009, 10:22 PM

67 K10 Small window cab. I am looking for a new cab. Name: 67_small.jpg
Views: 4568
Size: 46.8 KB

Name: 67_small2.jpg
Views: 4461
Size: 57.2 KB

409sbc pwr · 09-22-2009, 06:01 AM

my pavement pounder lol!

blklblsk8tr13 · 09-22-2009, 11:07 AM

here's mine. 68 on 75 frame. 11'' of lift and 38.5 swampers. has a dump bed and a 350. more pics to come.

vtblazer · 09-22-2009, 05:01 PM

Quote:

Originally Posted by blklblsk8tr13

here's mine. 68 on 75 frame.

...with a 71/72 front clip.

Why 11's to run 38's?

Mmmm, more pics please.

0331grunt · 09-23-2009, 05:48 PM

Quote:

Originally Posted by whistler

67 K10 Small window cab. I am looking for a new cab.Attachment 499034

Attachment 499035

I really dig the OD paint!! Looks good!

blklblsk8tr13 · 09-23-2009, 08:49 PM

Quote:

Originally Posted by vtblazer

...with a 71/72 front clip.

Why 11's to run 38's?

Mmmm, more pics please.

here ya go. it'd fit taller tires. used to run 46'' boggers when the leaf springs were good. how do you get them back to the original shape? the ranger's mine too. i bought the yellow one cause i thought it was awesome. im only 18 so my mom was PISSED when she came home and it was in the yard. haha

WILE E · 09-24-2009, 06:38 AM

here is a pic of my 72 k5. Got it a little over a month ago. Been working non stop to make it what i want. I bought it with a small lift and 35" tires. Now it's 9" lift with 38" boggers. Put in the dana 60, eaton, both 4:56's and locked. Built cage and bumpers, 4 wheel disc brakes, hydralic clutch, never like the mechanical linkage. Like most everyone's toys, it will never be done but that is what keeps it interesting!

0331grunt · 09-24-2009, 09:52 AM

Seeing these nice looking 4x4's is making me want one.. wait a minute, maybe two

Just curious.. what would ya'll think of a 69 crew cab sitting on 2 1/2 ton Rockwells with a 5.9 Cummins and a 10 speed Eaton running maybe some 42" IRocks? Been thinking about something like that....

muscletrucks · 09-24-2009, 09:58 AM

Wile, nice bumper/winch setup!!

WILE E · 09-24-2009, 10:07 AM

0331grunt, 69 crew cab, awsome. Just seen one @ Indy Jamboree last weekend. If you use the come on powerplant, no trouble spinning the 42's. The Irok's, well? Not the best friends of mine. Best of luck with the build if you go that route

vtblazer · 09-24-2009, 10:07 AM

Quote:

Originally Posted by 0331grunt

Seeing these nice looking 4x4's is making me want one.. wait a minute, maybe two

Just curious.. what would ya'll think of a 69 crew cab sitting on 2 1/2 ton Rockwells with a 5.9 Cummins and a 10 speed Eaton running maybe some 42" IRocks? Been thinking about something like that....

No need for the Rocs if your only gonna run 42's. (think HEAVY)

WILE E · 09-24-2009, 10:08 AM

thanks for comment muslcetrucks! It took me a good week to make the bumpers and cage, but I enjoyed evey minute of it.

0331grunt · 09-24-2009, 10:30 AM

Quote:

Originally Posted by vtblazer

No need for the Rocs if your only gonna run 42's. (think HEAVY)

Maybe some 52" Michellens? Probably never happen, but hey, what are dreams for??!!

I'm just thinking "overkill" here! But thanks for the comments... keeping the old gears in the head moving...

polaris21 · 09-24-2009, 10:54 AM

Heres a pic of my 86 chevy k10 i just bought for 900$. it has 9 in lift and has 36/14.5/ 16 super swampers.

09-09-2009, 10:33 PM	#751
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: How about some pics of your 4x4 If you do not mind.... How much lift and what size tires are those? __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

09-09-2009, 10:49 PM	#752
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 LIke your truck but is it going to make it out the garage? And I am pretty sure, those are the 35in boggers with a 6in lift because it looks pretty much like the stance mines has. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

09-09-2009, 10:52 PM	#753
barthmonster Registered User Join Date: Nov 2007 Location: Chamberlain, SD Posts: 183	Re: How about some pics of your 4x4 he can 'air-down' like the off-roaders to get in and out of the garage...

09-09-2009, 11:07 PM	#754
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 Sorry for messing up your pic but I think he just barely would make it if he does, see the pink lines. The white is what my truck will look like when i'm done its the exo. I bad version but similar. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300 Last edited by onlyifihadachevy; 09-09-2009 at 11:07 PM.

09-10-2009, 10:33 AM	#755
19704x4 Registered User Join Date: Nov 2008 Location: chesapeake, VA. Posts: 11	Re: How about some pics of your 4x4 I have a set of steel wheels with no rubber im going to use to get it out. Yep 6 with 35/16/16 boggers 14 boltff with detroit locker hd dana 44 up front with 410s

09-10-2009, 06:26 PM	#756
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 Same as mine its a 6 with 35/16/16.5, with a 10b and lock eaton __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

09-10-2009, 09:05 PM	#757
19704x4 Registered User Join Date: Nov 2008 Location: chesapeake, VA. Posts: 11	Re: How about some pics of your 4x4 sweet. i did a disc conversion on the rear and i am using a hydroboost master cylinder to run 4 wheel disc brakes

09-10-2009, 10:35 PM	#758
moharleyrider Registered User Join Date: Sep 2009 Location: O'Fallon, Missouri Posts: 4	Re: How about some pics of your 4x4 Hey, new to the sight and thought I'd throw my rides on here. 1979 Scottsdale, 454 cid, Edelbrock carb and intake, TH350, 10 bolt front, 14 bolt FF rear, 36" super swampers. Ok, this other is a Jeep but it does have a Chevy 350 in it. Last edited by moharleyrider; 09-11-2009 at 08:30 AM.

09-10-2009, 11:21 PM	#759
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 It is site, but welcome and nice truck. The jeeps cool too, if you have any pic of them wheeling post it in the 4x4 action pic thread. But i'm wondering why you put a chevy 350 and not a 302 in it, someone said it took less almost bolt in a 302 into his jeep, than a 350. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300 Last edited by onlyifihadachevy; 09-10-2009 at 11:21 PM.

09-20-2009, 01:55 PM	#761
el cocho Registered User Join Date: Sep 2009 Location: phx,az` Posts: 27	Re: How about some pics of your 4x4 heres my 81 gmc 3/4t longbed 4x4 468 bbc (550hp) turbo 400 6" lift 20" american racing wheels 37" nitto's

09-21-2009, 10:22 PM	#762
whistler Registered User Join Date: Sep 2009 Location: Poconos PA Posts: 1	Re: How about some pics of your 4x4 67 K10 Small window cab. I am looking for a new cab.

09-22-2009, 06:01 AM	#763
409sbc pwr Registered User Join Date: Sep 2009 Location: longview washington Posts: 114	Re: How about some pics of your 4x4 my pavement pounder lol! Attached Images __________________ 84 3/4ton swap 4x4, 409sbc 37x13.50 toyos 8 inch superlift 2007 2500 HD, 10-12 cognito lift, 38x13.50 toyos soon to be boosted via rearmount system

09-22-2009, 11:07 AM	#764
blklblsk8tr13 Registered User Join Date: Sep 2009 Location: Hampton, Ga Posts: 40	Re: How about some pics of your 4x4 here's mine. 68 on 75 frame. 11'' of lift and 38.5 swampers. has a dump bed and a 350. more pics to come. Attached Images

09-24-2009, 06:38 AM	#768
WILE E Registered User Join Date: Feb 2009 Location: St.Anne IL Posts: 33	Re: How about some pics of your 4x4 here is a pic of my 72 k5. Got it a little over a month ago. Been working non stop to make it what i want. I bought it with a small lift and 35" tires. Now it's 9" lift with 38" boggers. Put in the dana 60, eaton, both 4:56's and locked. Built cage and bumpers, 4 wheel disc brakes, hydralic clutch, never like the mechanical linkage. Like most everyone's toys, it will never be done but that is what keeps it interesting! Attached Images

09-24-2009, 09:52 AM	#769
0331grunt Now what?? Join Date: Sep 2009 Location: Webbers Falls, OK Posts: 579	Re: How about some pics of your 4x4 Seeing these nice looking 4x4's is making me want one.. wait a minute, maybe two Just curious.. what would ya'll think of a 69 crew cab sitting on 2 1/2 ton Rockwells with a 5.9 Cummins and a 10 speed Eaton running maybe some 42" IRocks? Been thinking about something like that.... __________________ 69 Long Fleet - Project 06 Ram 1ton Cummins 4x4-DD 01 Tahoe- wifes "The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi "A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell my, um, build USMC OIF Veteran SEMPER FI!



Register or Log In To remove these advertisements.

09-24-2009, 09:58 AM	#770
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: How about some pics of your 4x4 Wile, nice bumper/winch setup!! __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

09-24-2009, 10:07 AM	#771
WILE E Registered User Join Date: Feb 2009 Location: St.Anne IL Posts: 33	Re: How about some pics of your 4x4 0331grunt, 69 crew cab, awsome. Just seen one @ Indy Jamboree last weekend. If you use the come on powerplant, no trouble spinning the 42's. The Irok's, well? Not the best friends of mine. Best of luck with the build if you go that route

09-24-2009, 10:08 AM	#773
WILE E Registered User Join Date: Feb 2009 Location: St.Anne IL Posts: 33	Re: How about some pics of your 4x4 thanks for comment muslcetrucks! It took me a good week to make the bumpers and cage, but I enjoyed evey minute of it.

09-24-2009, 10:54 AM	#775
polaris21 Registered User Join Date: Feb 2009 Location: n/w Illinois Posts: 17	Re: How about some pics of your 4x4 Heres a pic of my 86 chevy k10 i just bought for 900$. it has 9 in lift and has 36/14.5/ 16 super swampers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.