OR 100's of misc parts from the last 6 trucks parted out

[tll74]

Originally Posted by 71 super

Tom do you have a standard cooling fan for a v8, a vacuum fitting for rear of intake for an automatic and a 67/68 washer bottle holder- it has the two ears that are vertical? If so I will take them- 1 some or all. Will Paypal ASAP, harold

Harold, I have all of it. fan 15.00 4 blade or multi blade flex. 67-68 or 69-72?, 5.00 vac fitting, single port or multi port (trans and P/B ports)? 10.00 washer bottle holder. Shipping 15.00

Originally Posted by rusted72'

Tom-
I need a set of alternator brackets and power steering brackets for a 72' with a 350sb.
trying to make my truck look as stock as possible.
if you do how much shipped to 90601?

I have the alt brackets 25.00, I only have the P/S brackets with a pump assy 75.00. Shipping on both 25.00 alt brackets only 15.00.

[QUOTE=tjsblazer;6766674]Tom, I am looking for a set of 4x4 exhaust hangers. One longer one midframe by the transfer case and one small one on the x-member above the rear axle. On Blazers for sure. Probably swb truck also. Unsure about other models. Do you have a set?
I have the front one. I'll check for the rear.

pics for VA72C10

[71 super]

Four blade fan 67-68 , single port vac. Found a washer bottle bracket in box of junk that came with truck. Shot me Paypal and I will get you paid. Thank you harold

[rusted72']

sounds good, can i get some pics before i commit?

thank you

[tll74]

Originally Posted by rusted72'

sounds good, can i get some pics before i commit?

thank you

Sure, It will be next week though.

[67JimmyMO]

Originally Posted by tll74

I have not been able to get it removed yet and I need it off for weight and dimensions for shipping cost. I been preparing for a vacation with the family to CA and just ran out of time. I'll have clean slate when I return next week...

Any progress on this one yet (underbed spare carrier for 67 GMC SWB)?

Thanks, Jody

[tjsblazer]

Here is a borrowed pic of a set of hangers. The small angle one is from the xmember above the rear axle. Thanks for looking.

[Jake1971]

Tom, my antenna and hardware arrived today. Thanks again!

[Userone]

got any more radio deletes? i need one with brackets

[JonnyC10]

Trailing arms? Pics and price shipped to 03809? Thanks.

[Jake1971]

Hey Tom, I am looking for one blue armrest for my '71 C10 and two unmolested tail light wiring harnesses from the firewall all the way back to the buckets. LMK total including shipping to 78602. Thanks again!

[Ccc925]

Any 1972 cheyenne door panels (black)? Thanks pm me

[Esetonni]

Do you have any cabs?

[pontiacpro]

Do you have a front centerline for the steering and if so how much? Thanks

[GRADYS Performance]

Do you have a throttle cable bracket for a mid 80s Q-jet with a TV cable hole for a 700R4 that bolts down with back carb bolts?

[pimpston65]

Originally Posted by tll74

Sure, It will be next week though.

any horns lo and hi. t3 headlights. 3 section antenna.

[burb71]

A few parts that really need…

The bolt that holds the muffler assembly on to the A/C compressor
The Speaker to radio harness
A solid mast radio antenna
And last, the little 2 light bulb harness that go's to the A/C control ( I know it was a 2 bulb harness for 1968 not sure about other years.

Please let me know.
Thanks Steve

[tll74]

Guys, sorry for the delay. I've been on vacation again and working 12-14 days so online and truck parts time has been hard to come by.


67JimmyMO, Jody, Yes. I have it off and I'm acid dipping as it has some surface rust. It could ship next week if your still up for it.

tjsblazer, I only have the bigger one. 14.00 shipped

Userone, I just bought a truck with one but I'm not sure if I'm going to part it yet. If i do I'll try to remember you for it.

JonnyC10, Yes I have a very nice pair. I acid dipped them which they didn't really need as they just some minor surface rust. 150.00 plus shipping. Shipping kinda spendy. LMK if the 150.00 is ok and I'll get a shipping cost.

Jake1971, I have the harness from the firewall to the bumper but nothing good from there to the sockets. I should have the armrest but I'll have to look to comfirm.
Ccc925, None that I'm willing to part with right now.

Esetonni, Yes but shippng to NC would kill the deal.

pontiacpro, 2wd draglink? If so what year and 1/2t or 3/4t? I have all of them.

GRADYS Performance, All the TH700 tv cable brackets as I recall all bolt down to the intake which I do have.

pimpston65, No HI note horns. Yes on the low. No T3's that I want to part with. Yes on antenna but couldn't get to pulling one for a couple weeks.

burb71, The speaker harness is soldered to the speaker. I would cut one off. 7.50 mailed. No antenna and nothing on the 2 bulb harness.

I will be gone on vacation again next Thursday through the following Wednesday. Thanks, Tom

[tjsblazer]

Originally Posted by tll74

tjsblazer, I only have the bigger one. 14.00 shipped

Hey Tom, I've found a set in the mean time.
Thanks, Jeff.

[71 super]

Tom do you have a interior fuse box/ harness for a 67-68, the original one I have has some internal issues and I do not have lights or wipers. I prefer a 67 with idiot light dash, but will take what you have. Thanks harold

[pontiacpro]

1969 1/2 ton 2wd with manual steering. Price with shipping to 17331. Thanks

[67JimmyMO]

Originally Posted by tll74

...67JimmyMO, Jody, Yes. I have it off and I'm acid dipping as it has some surface rust. It could ship next week if your still up for it...

Tom, yes I am still interested. If it was just surface rust on the carrier and the hardware is good that would be fine. Could you post a pic of it when you get a chance and let me know what the shipping is (65604)? Still no rush on my end...next week...next month...not a problem!

[tll74]

Originally Posted by 71 super

Tom do you have a interior fuse box/ harness for a 67-68, the original one I have has some internal issues and I do not have lights or wipers. I prefer a 67 with idiot light dash, but will take what you have. Thanks harold

Harold, I should have one from a 68 gauge/4sp truck I parted a year ago or so. I'll look for it Monday. If not I have atleast 5 complete 67-68 trucks that would have one but I couldn't get one out for at least 2 weeks. 65.00 plus 15.00 shipping for a very nice one.

Originally Posted by pontiacpro

1969 1/2 ton 2wd with manual steering. Price with shipping to 17331. Thanks

25.00 plus 16.00 shipping. It is off and ready.

Originally Posted by 67JimmyMO

Tom, yes I am still interested. If it was just surface rust on the carrier and the hardware is good that would be fine. Could you post a pic of it when you get a chance and let me know what the shipping is (65604)? Still no rush on my end...next week...next month...not a problem!

LOL...I'll post a pic when it is done.

Thanks, Tom

[Brave71]

I'm looking for a nice set of vent glass shipped to 89015...thanks

[rusted72']

Tom-i received the alternator brackets today.

thank you

[pimpston65]

is it too soon to ask about the antenna?