67 cheby's Dropmember build thread (CLOUD 9) - Page 311 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 11-23-2012, 12:58 PM

Needs a travel trunk on the other side, in matching leather with plaid liner, of course

Posted via Mobile Device
Posted via Mobile Device

**67cheby** · 11-23-2012, 01:18 PM

Quote:

Originally Posted by fastcam1

Cleaning supplies huh.... I'd stock em up with some frosty beverages
Posted via Mobile Device

LOL...well that also !

Quote:

Originally Posted by gringoloco

Needs a travel trunk on the other side, in matching leather with plaid liner, of course

Posted via Mobile Device
Posted via Mobile Device

GREAT IDEA !

Rusbuilt · 11-23-2012, 01:20 PM

Quote:

Originally Posted by 67cheby

the rack is 8 inches tall on the high side and 6 inches tall on the low side (that is the side the surfboard will mount on ) the square tubing bottom frame will mount level with the top of the bed rails, so it will be sticking up 8 inches above the top of the bed basically

Cool mike! I can't wait to see it on the truck!
Posted via Mobile Device

**67cheby** · 11-23-2012, 01:29 PM

thanks man, i thought it might be a cool touch, the surfboard will have a hinged mount that will let it flip up on its edge and prop up for shows then latch back down when we are ready to leave

jlsanborn · 11-23-2012, 02:29 PM

Sounds cool! Nice job on the tubing too. You'll have to post up some pics of the riv-nuts. Those are really slick and I'd bet there's a few folks that haven't seen them.

You don't think the wood looks too thick do ya? Any way you shake it it's going to be super unique and cool but I think I'd resaw them down to like 1/2" thick. Just my $0.02!

As for the peg, I agree on your take. An autocrosser would look cooler with the slope nose and smaller lights! We're ready for the build thread already even though you haven't found the subject yet.

**67cheby** · 11-23-2012, 02:47 PM

thanks man, i will do on the riv nuts or nut zerts , i love them i use them all over ! As far as the boards are concerned they look the right size in person...and they are stained already, LOL so no turning back now ! As soon as i get a blazer in hand the build thread will start ! I need to look and see the year cut off for the Goodguys shows

LODI3QTR · 11-23-2012, 03:15 PM

I think 1972 is the cut off date for

.......

**67cheby** · 11-23-2012, 03:41 PM

yep i just looked....THAT STINKS !

**Dieselwrencher** · 11-23-2012, 03:54 PM

Quote:

Originally Posted by 67cheby

yep i just looked....THAT STINKS !

In Des Moines I believe it goes to 73 or 74. Plus they had a super sunday last year which allows any year hot rod or modified in for the day.

gringoloco · 11-23-2012, 04:05 PM

Hm, guess you'll just have to convince her to do a 69-72 2-wheeler...

Posted via Mobile Device

**67cheby** · 11-23-2012, 04:15 PM

i want a Square body to showcase the square body Slosh Tubz

**67cheby** · 11-23-2012, 04:57 PM

here is a cool reflection picture i took at SEMA

duallyjams · 11-23-2012, 05:01 PM

Quote:

Originally Posted by 67cheby

here is a cool reflection picture i took at SEMA

That's a very cool pic.

**67cheby** · 11-23-2012, 10:48 PM

Grandpas first drive in Cloud 9.

Cloud 9's first ride with Grandpa - YouTube

Posted via Mobile Device

YBNORML · 11-23-2012, 10:53 PM

That's pretty cool, I bet she rides a little different than the last time he drove her

Posted via Mobile Device

1lo67 · 11-23-2012, 11:04 PM

That's what i've been waiting on, A big smile from Grandpa behind the wheel..Priceless

67c10rustbuket · 11-23-2012, 11:05 PM

Quote:

Originally Posted by 67cheby

Grandpas first drive in Cloud 9.

Cloud 9's first ride with Grandpa - YouTube
Posted via Mobile Device

Sweet, gotta get the trans fixed so he can fry the tires.

Posted via Mobile Device

**67cheby** · 11-23-2012, 11:13 PM

It makes me smile ! We will get a good burnout with him soon !
Posted via Mobile Device

nt30 · 11-23-2012, 11:17 PM

That's what we are all waiting on is a vid of Grandpa roasting the tires!
Posted via Mobile Device

**oldman3** · 11-24-2012, 12:29 AM

Way to go Mike, I know Grandpa was happy....Jim

**Dieselwrencher** · 11-24-2012, 12:44 AM

That's awesome. I bet he's pretty stoked!!!!

jwalk · 11-24-2012, 01:35 AM

I got to see this one in person the other day! It was good talking with ya Mike, you've got one nice clean truck! Great job!
Posted via Mobile Device

**superflysteiny** · 11-24-2012, 02:36 AM

Very cool
Posted via Mobile Device

Slick67 · 11-24-2012, 08:51 AM

Quote:

Originally Posted by nt30

That's what we are all waiting on is a vid of Grandpa roasting the tires!
Posted via Mobile Device

Can't wait for that vid!!!

Rusbuilt · 11-24-2012, 08:54 AM

Nice!

11-23-2012, 12:58 PM	#7751
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 cheby's Dropmember build thread (CLOUD 9) Needs a travel trunk on the other side, in matching leather with plaid liner, of course Posted via Mobile Device Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-23-2012, 01:29 PM	#7754
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) thanks man, i thought it might be a cool touch, the surfboard will have a hinged mount that will let it flip up on its edge and prop up for shows then latch back down when we are ready to leave __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 02:29 PM	#7755
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 67 cheby's Dropmember build thread (CLOUD 9) Sounds cool! Nice job on the tubing too. You'll have to post up some pics of the riv-nuts. Those are really slick and I'd bet there's a few folks that haven't seen them. You don't think the wood looks too thick do ya? Any way you shake it it's going to be super unique and cool but I think I'd resaw them down to like 1/2" thick. Just my $0.02! As for the peg, I agree on your take. An autocrosser would look cooler with the slope nose and smaller lights! We're ready for the build thread already even though you haven't found the subject yet. __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

11-23-2012, 02:47 PM	#7756
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) thanks man, i will do on the riv nuts or nut zerts , i love them i use them all over ! As far as the boards are concerned they look the right size in person...and they are stained already, LOL so no turning back now ! As soon as i get a blazer in hand the build thread will start ! I need to look and see the year cut off for the Goodguys shows __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 03:15 PM	#7757
LODI3QTR Registered User Join Date: Apr 2012 Location: Smithtown New York Posts: 156	Re: 67 cheby's Dropmember build thread (CLOUD 9) I think 1972 is the cut off date for ....... __________________ LEFT LANE IS FOR PASSING!!!! SLOWER TRAFFIC KEEP RIGHT!!!! My C20 & Cars... http://67-72chevytrucks.com/gallery/...&ppuser=111212 Last edited by LODI3QTR; 11-23-2012 at 03:34 PM.

11-23-2012, 03:41 PM	#7758
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) yep i just looked....THAT STINKS ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 04:05 PM	#7760
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 cheby's Dropmember build thread (CLOUD 9) Hm, guess you'll just have to convince her to do a 69-72 2-wheeler... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-23-2012, 04:15 PM	#7761
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) i want a Square body to showcase the square body Slosh Tubz __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 04:57 PM	#7762
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) here is a cool reflection picture i took at SEMA Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 10:53 PM	#7765
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 67 cheby's Dropmember build thread (CLOUD 9) That's pretty cool, I bet she rides a little different than the last time he drove her Posted via Mobile Device __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

11-23-2012, 11:04 PM	#7766
1lo67 Registered User Join Date: May 2005 Location: Morristown, Tn Posts: 275	Re: 67 cheby's Dropmember build thread (CLOUD 9) That's what i've been waiting on, A big smile from Grandpa behind the wheel..Priceless

11-23-2012, 11:13 PM	#7768
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) It makes me smile ! We will get a good burnout with him soon ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-23-2012, 11:17 PM	#7769
nt30 Registered User Join Date: Sep 2011 Location: Boston,MA Posts: 75	Re: 67 cheby's Dropmember build thread (CLOUD 9) That's what we are all waiting on is a vid of Grandpa roasting the tires! Posted via Mobile Device

11-24-2012, 12:29 AM	#7770
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: 67 cheby's Dropmember build thread (CLOUD 9) Way to go Mike, I know Grandpa was happy....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-24-2012, 12:44 AM	#7771
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 67 cheby's Dropmember build thread (CLOUD 9) That's awesome. I bet he's pretty stoked!!!! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

11-24-2012, 01:35 AM	#7772
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: 67 cheby's Dropmember build thread (CLOUD 9) I got to see this one in person the other day! It was good talking with ya Mike, you've got one nice clean truck! Great job! Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

11-24-2012, 02:36 AM	#7773
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 67 cheby's Dropmember build thread (CLOUD 9) Very cool Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-24-2012, 08:54 AM	#7775
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 67 cheby's Dropmember build thread (CLOUD 9) Nice! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.