Greg65 build thread - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greg65 · 03-15-2016, 10:06 AM

After getting the parts home I decided to install them and see how they looked. Also they are safer on the truck than laying around the garage. Please excuse the blue carpet and my moving blanket seat cover. Next up is getting the inner fenders and radiator support painted black.

greg65 · 03-15-2016, 10:13 AM

Quote:

Originally Posted by 66ChevyMax

Fun times

Yes. Nothing quite like spending time working on the truck. Especially with the help of my thirteen year old son. Good times.

likaroc13 · 03-15-2016, 12:22 PM

That's really looking good! Makes a fella want new paint for sure.

siggyfreud · 03-15-2016, 12:29 PM

Looks excellent! I can't wait until I can be at the painting stage. Wish all you talented painters were closer so I could just bribe you into doing my project

.

greg65 · 03-15-2016, 12:33 PM

Quote:

Originally Posted by likaroc13

That's really looking good! Makes a fella want new paint for sure.

thanks Phillip

greg65 · 03-15-2016, 12:34 PM

Quote:

Originally Posted by siggyfreud

Looks excellent! I can't wait until I can be at the painting stage. Wish all you talented painters were closer so I could just bribe you into doing my project

.

thank you. It's always good to have talented friends.

chad64chevy · 03-15-2016, 06:53 PM

looking good Greg! I bet your super excited, cause I know I would be, lol

greg65 · 03-16-2016, 09:39 AM

Quote:

Originally Posted by chad64chevy

looking good Greg! I bet your super excited, cause I know I would be, lol

Thank you Chad. Yes sir, very pleased on how it turned out.

greg65 · 04-07-2016, 09:48 AM

A small update. The inner fenders are ready for primer which should be done tonight. And then painting them, the radiator support, and hood hinges should not be far behind. Next on the list will be the stamping issues that come with buying aftermarket repop fenders. a couple welds and some seam sealer and we should be good.

greg65 · 04-11-2016, 10:17 AM

I had a little free time to check on the progress of the the inner fenders last week and I was able to see the last coat of paint being applied. The picture were taken before the paint had time to dry. We went with a semi-gloss finish.

likaroc13 · 04-11-2016, 10:59 AM

Looks nice!

NevEno · 04-11-2016, 11:56 AM

Looking good!

**66ChevyMax** · 04-11-2016, 03:15 PM

Nice!

greg65 · 04-11-2016, 03:20 PM

Quote:

Originally Posted by likaroc13

Looks nice!

thanks Phillip

greg65 · 04-11-2016, 03:20 PM

Quote:

Originally Posted by NevEno

Looking good!

thank you

greg65 · 04-11-2016, 03:22 PM

Quote:

Originally Posted by 66ChevyMax

Nice!

Thank you.

greg65 · 06-07-2016, 05:03 PM

A little more progress today. Since my core support was already off of the truck I mounted the condenser and dryer. Also got the measurements layed out to cut the 1 1/4 inch hole in the support for the hard lines to run through.

aggie91 · 06-08-2016, 08:34 AM

Step by Step.

Nice progress, parts look good in that semi-gloss black.

greg65 · 06-09-2016, 09:23 AM

Quote:

Originally Posted by aggie91

Step by Step.

Nice progress, parts look good in that semi-gloss black.

Thanks Karl.

greg65 · 06-09-2016, 09:27 AM

Here is a couple pictures of the condenser, dryer, and core support back on the truck. Everything fit like it should. Vintage Air makes a great product.

likaroc13 · 06-10-2016, 09:08 AM

Always great when things fit like they're supposed to!

**66ChevyMax** · 06-10-2016, 09:34 AM

Getting closer!

chad64chevy · 06-14-2016, 06:38 PM

looking good Greg! got to love painted parts, it's coming along nicely

greg65 · 06-15-2016, 09:36 AM

Thanks Guys! Still got a long way to go.

greg65 · 09-13-2016, 09:50 AM

It's been a while since I have had any truck time so progress has been slow. I did manage pick up a Corvette style fuel filter with an internal regulator and three Russell -6 AN fitting. The rest of the fittings should come in on Friday.

03-15-2016, 10:06 AM	#776
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread After getting the parts home I decided to install them and see how they looked. Also they are safer on the truck than laying around the garage. Please excuse the blue carpet and my moving blanket seat cover. Next up is getting the inner fenders and radiator support painted black. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

03-15-2016, 12:22 PM	#778
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Greg65 build thread That's really looking good! Makes a fella want new paint for sure. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

03-15-2016, 12:29 PM	#779
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: Greg65 build thread Looks excellent! I can't wait until I can be at the painting stage. Wish all you talented painters were closer so I could just bribe you into doing my project . __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

03-15-2016, 06:53 PM	#782
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Greg65 build thread looking good Greg! I bet your super excited, cause I know I would be, lol __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

04-07-2016, 09:48 AM	#784
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread A small update. The inner fenders are ready for primer which should be done tonight. And then painting them, the radiator support, and hood hinges should not be far behind. Next on the list will be the stamping issues that come with buying aftermarket repop fenders. a couple welds and some seam sealer and we should be good. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-11-2016, 10:17 AM	#785
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread I had a little free time to check on the progress of the the inner fenders last week and I was able to see the last coat of paint being applied. The picture were taken before the paint had time to dry. We went with a semi-gloss finish. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-11-2016, 10:59 AM	#786
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Greg65 build thread Looks nice! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

04-11-2016, 11:56 AM	#787
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: Greg65 build thread Looking good!

04-11-2016, 03:15 PM	#788
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Greg65 build thread Nice! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

06-07-2016, 05:03 PM	#792
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread A little more progress today. Since my core support was already off of the truck I mounted the condenser and dryer. Also got the measurements layed out to cut the 1 1/4 inch hole in the support for the hard lines to run through. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

06-08-2016, 08:34 AM	#793
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Greg65 build thread Step by Step. Nice progress, parts look good in that semi-gloss black. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

06-09-2016, 09:27 AM	#795
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Here is a couple pictures of the condenser, dryer, and core support back on the truck. Everything fit like it should. Vintage Air makes a great product. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

06-10-2016, 09:08 AM	#796
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Greg65 build thread Always great when things fit like they're supposed to! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

06-10-2016, 09:34 AM	#797
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Greg65 build thread Getting closer! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

06-14-2016, 06:38 PM	#798
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Greg65 build thread looking good Greg! got to love painted parts, it's coming along nicely __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163



Register or Log In To remove these advertisements.

06-15-2016, 09:36 AM	#799
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Thanks Guys! Still got a long way to go. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

09-13-2016, 09:50 AM	#800
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread It's been a while since I have had any truck time so progress has been slow. I did manage pick up a Corvette style fuel filter with an internal regulator and three Russell -6 AN fitting. The rest of the fittings should come in on Friday. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.