Power Steering Adapter Plates

[Captainfab]

Payment received. I will build and ship your order on Tuesday.

Originally Posted by rincones

Payment sent earlier today.

Thanks

[Budman56]

Payment sent

[Captainfab]

Payment received.

Originally Posted by Budman56

Payment sent

[frankinstein]

I would like to purchase a steering adapter plate for a 1967 K10 can you PM me your Paypal info.

[Captainfab]

PM sent.

Originally Posted by frankinstein

I would like to purchase a steering adapter plate for a 1967 K10 can you PM me your Paypal info.

[mygmctruck1]

Got my bracket today , no templet but you said it wouldn’t work for a 68 K1500 4x4 anyhow.
But you did give me a link for installation dimensions , how ever I can not get the link to work ?

Centering the plate as you mentioned in the directions , can I assume just one hole in the frame ( bottom right ) will be used and the rest have to be drilled ?

I currently have no column to reference from , everything is off the frame cab and all .

[Captainfab]

I have never installed power steering on a K series truck, That is why I do not have a template or installation instructions specific to the K series frames. Working 80hrs/7 days a week does not allow me time to do that.

I included the '63-'66 C series installation instructions and a basic reference only. It in no way is accurate as to where to place the steering box plate.

Here is the thread I sent you previously with dimensions you will need to install your power steering.

http://www.67-72chevytrucks.com/vboa...=632508&page=6

Originally Posted by mygmctruck1

Got my bracket today , no templet but you said it wouldn’t work for a 68 K1500 4x4 anyhow.
But you did give me a link for installation dimensions , how ever I can not get the link to work ?

Centering the plate as you mentioned in the directions , can I assume just one hole in the frame ( bottom right ) will be used and the rest have to be drilled ?

I currently have no column to reference from , everything is off the frame cab and all .

[btburn]

Payment sent.
Thanks

[Captainfab]

I have not received a payment for only a steering box adapter plate since 09-06-18. Did you send me a MO in the mail or did you send a PayPal payment?

Originally Posted by btburn

Payment sent.
Thanks

[btburn]

Originally Posted by Captainfab

I have not received a payment for only a steering box adapter plate since 09-06-18. Did you send me a MO in the mail or did you send a PayPal payment?

Re-sent it, not sure why it didn't go through from my computer.

[Captainfab]

Payment received for a '63-'66 steering box adapter plate only, no tube and flange.

[CousinTone]

John, question for you. I’ve got the adapter plate from you a bit ago. I’m finally getting to the job and I’ve been given a gear with 3 mounting holes, it’s appeal is it’s only 2.7 to 3.0 turns lock to lock. Am I able to use this quicker ratio gear with my plate? Appears all 3 line up with 3 of 4 bolt locations. Let me know, I appreciate it very much!!

[Captainfab]

I have never seen a '68-'86 C series or a '87-'91 R series truck power steering box with only 3 mounting holes. Has the 4th one just been drilled out as is needed on everyone else's power steering adapter plates? I guess if the 3 that are there line up and the steering shaft lines as well as the pitman arm, it should work?

Originally Posted by CousinTone

John, question for you. I’ve got the adapter plate from you a bit ago. I’m finally getting to the job and I’ve been given a gear with 3 mounting holes, it’s appeal is it’s only 2.7 to 3.0 turns lock to lock. Am I able to use this quicker ratio gear with my plate? Appears all 3 line up with 3 of 4 bolt locations. Let me know, I appreciate it very much!!

[captinjack]

I sent you a pm.

[Captainfab]

PM replied to......

[54Caddy]

Plates works with the 500 series CPP gear box correct?

[Captainfab]

Please be patient. I only have time to log into the forum once a day. I replied to your PM.

Originally Posted by 54Caddy

Plates works with the 500 series CPP gear box correct?

[captinjack]

I sent you a pm

[Munnster1984]

I have a 1968 gmc k1500 that a need a steering box plate for could you PM me the info please?

[Captainfab]

I replied to your PM........

Originally Posted by Munnster1984

I have a 1968 gmc k1500 that a need a steering box plate for could you PM me the info please?

[captinjack]

pm sent

[Captainfab]

I replied to both of your PM's

[61zac]

I think my eyes are bleeding after reading about 17 pages of the thread. I got to about year 2012 and decided to skip to the end and see if anything ever came about with the 60-62 adapter in the 6 years since.
Also, any idea about a lower ratio (than stock) steering gear? I found a thread listed in this thread - but also from 2012 and all the links are broken.

Thanks a bunch!

[Captainfab]

I do have a power steering plate kit for the '60-'62 frames. However I still do not have installation instructions or a template specific to the '60-'62 frames. There are 3 threads here with info on installing the kit.


http://www.67-72chevytrucks.com/vboa...d.php?t=749608

http://www.67-72chevytrucks.com/vboa...d.php?t=657913

http://www.67-72chevytrucks.com/vboa...d.php?t=683028

[61zac]

Sweet! Sign me up. I'll take a '61 kit.

Also, I picked up this combo generator / power steering pump yesterday. If I can get it stuffed into the crowded, driver side of my engine bay, any idea if it'll drive the steering gear?