Do you need '64-'66 Chevy Truck Parts? - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 10-10-2009, 12:53 AM

Tony, The trim arrived today. Very very nice! As you said most of it was in original GM packaging and all looks excellent. Thanks for coming through and I will not hesitate to do business with you again. Hope all is well on your end.

283 Man · 10-10-2009, 02:53 AM

Tony Ill be sending you a money order for the black one at the first of the week thanks for quick reply. Morton

*LILRED66* · 10-10-2009, 04:44 AM

Quote:

Originally Posted by Frizzle Fry

Tony, The trim arrived today. Very very nice! As you said most of it was in original GM packaging and all looks excellent. Thanks for coming through and I will not hesitate to do business with you again. Hope all is well on your end.

Frizz:

I really appreciate your business and your patience. I look forward to working with you in the future and thanks for all the efforts you put into the site. If it wasn't for you guys/gals, none of this would be possible. Enjoy the weekend.

*LILRED66* · 10-10-2009, 04:47 AM

Quote:

Originally Posted by Byronic

Tony,
Do you carry any burb parts? I'm looking for the interior pieces that run above the side windows down the length of the truck. They tie the headliner to the sides of the truck.

Thanks for the inquiry Byronic. I have three burbs, but I need to check to see if they have the headliner trim. I have one at my shop in Kansas City, KS and two at my brother's place in Medford, OR. I will have him check and I will get back with you. Thanks for the opportunity.

*LILRED66* · 10-10-2009, 04:52 AM

Quote:

Originally Posted by 283 Man

Tony Ill be sending you a money order for the black one at the first of the week thanks for quick reply. Morton

Thanks Mort. I will hook you up as soon as I receive the payment. Thanks for your business and support. Enjoy the weekend.

*LILRED66* · 10-11-2009, 10:16 PM

Quote:

Originally Posted by Byronic

Tony,
Do you carry any burb parts? I'm looking for the interior pieces that run above the side windows down the length of the truck. They tie the headliner to the sides of the truck.

Byronic:

Are these what you are looking for? If so, I have a complete set from a '65 Chevy Suburban, including the factory correct mounting screws.

71'tahoe · 10-12-2009, 04:23 PM

I lost the key to my 65 truck...you got a key and switch? How much shipped to 45142

*LILRED66* · 10-12-2009, 06:07 PM

Quote:

Originally Posted by 71'tahoe

I lost the key to my 65 truck...you got a key and switch? How much shipped to 45142

You might try a locksmith, but I do have a factory ignition switch, including key and chrome bezel nut. The set-up is $25.00, including shipping.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

*LILRED66* · 10-12-2009, 06:41 PM

Quote:

Originally Posted by wrench_65

hey tony do you have a pic of the grill support????

Here are a few. It is rust-free and dent-free. Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Byronic · 10-12-2009, 07:26 PM

Tony,
Those are the trim pieces I'm looking for. PM me for price with shipping. I'll take the best set you have with the screws. How much for a backup light switch for the auto column I got from you? Thanks, Look forward to hear from you.

northern 85 · 10-12-2009, 07:26 PM

Hey Tony, Did you ever sell the 4,5,6 tach cluster with the clock?

*LILRED66* · 10-12-2009, 08:07 PM

Quote:

Originally Posted by Byronic

Tony,
Those are the trim pieces I'm looking for. PM me for price with shipping. I'll take the best set you have with the screws. How much for a backup light switch for the auto column I got from you? Thanks, Look forward to hear from you.

I will send you a PM with the particulars on the Suburban headliner trim & screws. I will send the neutral/safety switch, if you decide to get the headliner trim.

*LILRED66* · 10-12-2009, 08:12 PM

Quote:

Originally Posted by northern 85

Hey Tony, Did you ever sell the 4,5,6 tach cluster with the clock?

I did sell it, but the fellow that committed to buy it never sent the money, so I still have it. Let me know if you want it and thanks for the inquiry.

71'tahoe · 10-12-2009, 11:04 PM

Tony how do I go about paying you? I will take the key w switch and nut on friday. Thank you for letting me know.

northern 85 · 10-13-2009, 05:31 AM

Pm sent.

*LILRED66* · 10-13-2009, 07:09 AM

Quote:

Originally Posted by 71'tahoe

Tony how do I go about paying you? I will take the key w switch and nut on friday. Thank you for letting me know.

Thanks for the prompt reply. I accept PayPal at:

4-5-6chevytrucks@sbcglobal.net

or money order at:

Tony Smith
4-5-6 Chevy Trucks
560 South 11th Street
Kansas City, KS 66105

Thanks for the opportunity and I look forward to hearing from you.

*LILRED66* · 10-13-2009, 07:10 AM

Quote:

Originally Posted by northern 85

Pm sent.

I received your PM and sent a reply. Thanks for your interest and let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

shortbed70 · 10-13-2009, 07:12 PM

Thanks Tony once again for the column and I am trying to contact that guy about the fuel tank and see if he's interested.

*LILRED66* · 10-13-2009, 07:14 PM

Quote:

Originally Posted by shortbed70

Thanks Tony once again for the column and I am trying to contact that guy about the fuel tank and see if he's interested.

I hope it works for you. I know the factory auto column is what I needed for my '66 Chevy K10.

I tried to find that fellow looking for the fuel tank, to no avail. Please let me know if you locate him. Thanks again.

283 Man · 10-16-2009, 03:47 AM

Tony looking for a turn signal canceling cam wires and plastic thing that goes inside the steering wheel 64-66 whats your price on a used one? thanks Morton

283 Man · 10-16-2009, 04:13 AM

Tony how much for insterment dash cluster 64-66 the ones that got genrator light and oil preasure light on front of them? thanks Morton

**DPowers** · 10-16-2009, 07:40 PM

Tony can you give me a price on a shroud. 283- just the round piece.
thanks

*LILRED66* · 10-16-2009, 08:08 PM

Quote:

Originally Posted by DPowers

Tony can you give me a price on a shroud. 283- just the round piece.
thanks

Thanks for the inquiry. The factory V8 fan shroud for the '63-'66 Chevy trucks is a one piece assembly, so I am not sure what you mean by "just the round piece". I would post pictures, but, once again, the server is not allowing attachments or at least I haven't been formally trained on the new method for doing so. If you have an e-mail address, I will e-mail a few to you.

**DPowers** · 10-16-2009, 11:44 PM

dwanepowers@att.net

*LILRED66* · 10-17-2009, 06:06 AM

DPowers:

E-mail & photos sent. Thanks for your interest and let me know if I can help.

10-10-2009, 12:53 AM	#826
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Do you need '64-'66 Chevy Truck Parts? Tony, The trim arrived today. Very very nice! As you said most of it was in original GM packaging and all looks excellent. Thanks for coming through and I will not hesitate to do business with you again. Hope all is well on your end.

10-10-2009, 02:53 AM	#827
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony Ill be sending you a money order for the black one at the first of the week thanks for quick reply. Morton __________________ 283 the mighty small block

10-12-2009, 04:23 PM	#832
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: Do you need '64-'66 Chevy Truck Parts? I lost the key to my 65 truck...you got a key and switch? How much shipped to 45142

10-12-2009, 07:26 PM	#835
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Do you need '64-'66 Chevy Truck Parts? Tony, Those are the trim pieces I'm looking for. PM me for price with shipping. I'll take the best set you have with the screws. How much for a backup light switch for the auto column I got from you? Thanks, Look forward to hear from you. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed Last edited by Byronic; 10-12-2009 at 07:47 PM.

10-12-2009, 07:26 PM	#836
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Do you need '64-'66 Chevy Truck Parts? Hey Tony, Did you ever sell the 4,5,6 tach cluster with the clock?

10-12-2009, 11:04 PM	#839
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: Do you need '64-'66 Chevy Truck Parts? Tony how do I go about paying you? I will take the key w switch and nut on friday. Thank you for letting me know.

10-13-2009, 05:31 AM	#840
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Do you need '64-'66 Chevy Truck Parts? Pm sent.

10-13-2009, 07:12 PM	#843
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Do you need '64-'66 Chevy Truck Parts? Thanks Tony once again for the column and I am trying to contact that guy about the fuel tank and see if he's interested. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-16-2009, 03:47 AM	#845
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony looking for a turn signal canceling cam wires and plastic thing that goes inside the steering wheel 64-66 whats your price on a used one? thanks Morton __________________ 283 the mighty small block

10-16-2009, 04:13 AM	#846
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony how much for insterment dash cluster 64-66 the ones that got genrator light and oil preasure light on front of them? thanks Morton __________________ 283 the mighty small block

10-16-2009, 07:40 PM	#847
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: Do you need '64-'66 Chevy Truck Parts? Tony can you give me a price on a shroud. 283- just the round piece. thanks

10-16-2009, 11:44 PM	#849
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: Do you need '64-'66 Chevy Truck Parts? dwanepowers@att.net

10-17-2009, 06:06 AM	#850
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? DPowers: E-mail & photos sent. Thanks for your interest and let me know if I can help. Last edited by LILRED66; 10-18-2009 at 06:02 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.