How about some pics of Static dropped 60-66

[forestb]

I have gone as low as 5.5 inches in the rear without it bottoming out on the rear axle. 4 in drop coils and 1.5 in blocks. It did not bottom out until I did a 6 in drop.

[MT65]

Stock spindles, on 86 front xmember and coilovers on all 4 corners

[EricS76]

1966 longbed fleetside. 4” front (2” spring, 2” spindle). 7” rear (5” spring, 2” block). 235/75R15 tires.

[lgh1157]

Originally Posted by islander671

Just kidding, but seriously though lowered it finally. 2 inch blocks to come. A before and after shot

Love this truck

Do you have to notch the rear frame ?

Thx

[PowerdbyChevy79]

Heres my 66...

[theastronaut]

Front- CPP drop spindles, one coil cut off the stock springs, bump stop bracket completely removed from the LCA, KYB Gas-A-Just shocks, stock 15x5.5" wheels, 1.5' bolt on wheel spacers, 215/75 tires. No rubbing over bumps or when turning full lock.

Rear- D2600 bags bolted directly to the trailing arms, top has short cups to make room for the air fitting. 1.5" drop blocks to keep the bags from being as compressed at ride height. Bump stop shortened but it only has about 1.5" of travel at this height so I need to do a 2" pipe notch. Shocks relocated via the Frizzle Fry method. 8" wheels, 235/75 tires.

[Angrywood]

Just finished my 3 in drop

[lgh1157]

Join Date: Aug 2008
Location: atlanta GA
Posts: 49

Re: How about some pics of Static Dropped C-10's
Picked this up 2 weeks ago

Went to town on it

2.5 CPP Drop Spindles

3-5 Coils

15" Wheel Vintiques with 205/75 Cokers

Gonna add a 2" block and add a bolt on notch on the rear to get it a bit more level

( i thought i already posted on this thread, but couldn't see it on here )

[PowerdbyChevy79]

Originally Posted by theastronaut

Front- CPP drop spindles, one coil cut off the stock springs, bump stop bracket completely removed from the LCA, KYB Gas-A-Just shocks, stock 15x5.5" wheels, 1.5' bolt on wheel spacers, 215/75 tires. No rubbing over bumps or when turning full lock.

Rear- D2600 bags bolted directly to the trailing arms, top has short cups to make room for the air fitting. 1.5" drop blocks to keep the bags from being as compressed at ride height. Bump stop shortened but it only has about 1.5" of travel at this height so I need to do a 2" pipe notch. Shocks relocated via the Frizzle Fry method. 8" wheels, 235/75 tires.

Love it... love the color

[Arne]

'64 Short Step conversion (born as long Fleet), shortened and lowered by prior owner. I was told 3" both F and R all with POL springs. Wheels are 15x8 with 275/60R15.

[pdxhall]

Here's mine. 2 1/2" drop spindles and 1" drop coi;s in front and 5" drop springs in the rear with 17" rims.
'

[TGRAY]

My 62 Shorty with 3/4 drop. 3" on torsion bars and 4" drop springs on rear.