1969 Short Wide - Page 37 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 03-16-2012, 08:21 AM

Nice progress
Posted via Mobile Device

Zoomin · 03-16-2012, 11:55 PM

Keep at it Mike, you'll be cruising in it soon.
Posted via Mobile Device

mcbassin · 03-27-2012, 08:37 AM

Quote:

Originally Posted by 68 TT

Looking good Mike.
Glad you got the exhaust figured out.

Thanks Mike just a 4 or 5 hour setback

Quote:

Originally Posted by 67cheby

Nice progress

Thanks Mike

Quote:

Originally Posted by Zoomin

Keep at it Mike, you'll be cruising in it soon.

Thanks Steve.

Quote:

Originally Posted by MJs69CST

Nice build! What did you coat the rain channel on the firewall with before sealing it up?

Was thinking about doing something similar on my build and hope it turns out as nice as yours did.

Thanks. I used Matrix seam sealer by Evercoat. Then Por-15 paint.

Quote:

Originally Posted by LakeAnna

Looks like your ready for the body work... Exhaust and everything looks nice.

Thanks Chris.

Quote:

Originally Posted by Crash_OK

WOW you got busy after I left.
When do you want to sit the cab back on the frame

Thanks Mark. Next time I install the cab I hope it's permenant.

mcbassin · 03-27-2012, 08:46 AM

A little update. Not a whole lot of progress but it is what it is. This time of year my fishing and golf kind of fills up the weekends.
I got the last of the rust killed (I think). Then cut the high hump tranny cover hole in the floor. Then started fitting the buckets. I got some information about drilling the holes HERE. I made some braces from old ball bearing drawer slides. They are the same thickness and near the same shape as the OEM braces. Hope to have some POR-15 on the bottom this week.

chevy88 · 03-27-2012, 08:53 AM

Nice progress, those buckets look sharp in there.

raull · 03-27-2012, 08:56 AM

you are rolling !!!!!!!!!!!!! looks good

big_al_71 · 03-27-2012, 09:25 AM

Great work Mike!!!

67c10rustbuket · 03-27-2012, 06:36 PM

Seat install turned out nice Mike! So are those from a 67-72 truck? I thought they only had that buddy bucket option. I like that setup with the console better than the middle seat. must have been a rare option?

mcbassin · 03-27-2012, 11:36 PM

Quote:

Originally Posted by chevy88

Nice progress, those buckets look sharp in there.

Thanks.

Quote:

Originally Posted by raull

you are rolling !!!!!!!!!!!!! looks good

Thanks Rual.

Quote:

Originally Posted by big_al_71

Great work Mike!!!

Thanks Al.

Quote:

Originally Posted by 67c10rustbuket

Seat install turned out nice Mike! So are those from a 67-72 truck? I thought they only had that buddy bucket option. I like that setup with the console better than the middle seat. must have been a rare option?

Thanks Dan, Yes they are out of a 71-72 specifically. Notice the scrolls on the seat cover. The 69-70 has a wider single scroll right down the center instead (screaminchevypickup taught me that). And of course the 67-68 had the buddy buckets. I'm pretty sure any buckets were a rare option. I got lucky and found these local for a good price and they are in real good condition.

chevy71c10 · 03-28-2012, 12:34 AM

Nice job on relocating the seat mounting holes! I'll have to reference this thread when I get to that point as I'm wanting to put late model buckets in mine as well. Thanks for sharing!

LakeAnna · 03-28-2012, 05:06 AM

Looks good... those seats are gonna be nice! Your almost ready for some paint under there!

Bennett68C10 · 03-28-2012, 08:02 AM

Good work Mike, everything looks great

**screaminchevypickup** · 04-05-2012, 01:45 AM

Well anymore progress!!!
Posted via Mobile Device

mcbassin · 04-05-2012, 08:31 AM

Quote:

Originally Posted by chevy71c10

Nice job on relocating the seat mounting holes! I'll have to reference this thread when I get to that point as I'm wanting to put late model buckets in mine as well. Thanks for sharing!

Thanks, I think the buckets will work out good.

Quote:

Originally Posted by LakeAnna

Looks good... those seats are gonna be nice! Your almost ready for some paint under there!

Thanks, It is painted under there now. Pictures in the near future.

Quote:

Originally Posted by Bennett--G4L

Good work Mike, everything looks great

Thanks

Quote:

Originally Posted by screaminchevypickup

Well anymore progress!!!

Working on it Kyle. I actually started flinging mud at the firewall last night. I almost forgot how much I love the smell of filler.

**Dieselwrencher** · 04-05-2012, 06:15 PM

Great work and sweet idea on the drawer slides for support brackets! I might steal your idea if I can find some old slides.

Lower · 04-05-2012, 11:32 PM

Looking good!

smoknbarrels · 04-13-2012, 12:09 PM

went through most of the pages.. such a nice clean build! that cab is turning out great, even though the PO created a bit more work for ya.

JohnC · 04-13-2012, 01:37 PM

It's getting there man! Keep at it!

mcbassin · 04-15-2012, 09:17 PM

Quote:

Originally Posted by Dieselwrencher

Great work and sweet idea on the drawer slides for support brackets! I might steal your idea if I can find some old slides.

Thanks Ryan. I may have some extras if you need some.

Quote:

Originally Posted by Lower

Looking good!

Thanks Jon.

Quote:

Originally Posted by smoknbarrels

went through most of the pages.. such a nice clean build! that cab is turning out great, even though the PO created a bit more work for ya.

Thank you.

Quote:

Originally Posted by JohnC

It's getting there man! Keep at it!

Thanks John. Slow but sure.

mcbassin · 04-15-2012, 09:48 PM

Time for an overdue update. I have been working on the cab. But it has been slow going. This time of year really slows progress, a lot of other things going on.
On to the pictures.

Got the bottom of the cab painted with Por-15

Got the high hump painted and installed

Prepped under the dash for paint

Cut the firewall for the old style Vintage/air kit. I will be making a custom billet cover to keep it clean.

Made a mount for the DBW pedal. Notice the pedal arm had to be sectioned to get the angle close to the original.

Started bodywork on the firewall and epoxy primered

**screaminchevypickup** · 04-15-2012, 11:02 PM

Looks good mike!!!
Posted via Mobile Device

VA72C10 · 04-15-2012, 11:23 PM

Looking great! Especially the firewall!!

bjcaldwe · 04-15-2012, 11:42 PM

Nice progress.

jasonhall · 04-15-2012, 11:52 PM

Very nice
Posted via Mobile Device

67c10rustbuket · 04-16-2012, 07:35 AM

Looks great Mike, Good job on the pedal mount.

03-16-2012, 08:21 AM	#901
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 Short Wide Nice progress Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-16-2012, 11:55 PM	#902
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1969 Short Wide Keep at it Mike, you'll be cruising in it soon. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-27-2012, 08:46 AM	#904
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide A little update. Not a whole lot of progress but it is what it is. This time of year my fishing and golf kind of fills up the weekends. I got the last of the rust killed (I think). Then cut the high hump tranny cover hole in the floor. Then started fitting the buckets. I got some information about drilling the holes HERE. I made some braces from old ball bearing drawer slides. They are the same thickness and near the same shape as the OEM braces. Hope to have some POR-15 on the bottom this week. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-27-2012, 08:53 AM	#905
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: 1969 Short Wide Nice progress, those buckets look sharp in there. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

03-27-2012, 08:56 AM	#906
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1969 Short Wide you are rolling !!!!!!!!!!!!! looks good __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

03-27-2012, 09:25 AM	#907
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1969 Short Wide Great work Mike!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-27-2012, 06:36 PM	#908
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: 1969 Short Wide Seat install turned out nice Mike! So are those from a 67-72 truck? I thought they only had that buddy bucket option. I like that setup with the console better than the middle seat. must have been a rare option? __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

03-28-2012, 12:34 AM	#910
chevy71c10 Registered User Join Date: Oct 2009 Location: Panama City Beach, FL Posts: 228	Re: 1969 Short Wide Nice job on relocating the seat mounting holes! I'll have to reference this thread when I get to that point as I'm wanting to put late model buckets in mine as well. Thanks for sharing! __________________ Justin 71' C10 SWB 00' Dakota R/T 05' Z-71 Silverado 16' Z-71 Silverado Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=376904

03-28-2012, 05:06 AM	#911
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 1969 Short Wide Looks good... those seats are gonna be nice! Your almost ready for some paint under there! __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

03-28-2012, 08:02 AM	#912
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 Short Wide Good work Mike, everything looks great __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-05-2012, 01:45 AM	#913
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Well anymore progress!!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

04-05-2012, 06:15 PM	#915
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 Short Wide Great work and sweet idea on the drawer slides for support brackets! I might steal your idea if I can find some old slides. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-05-2012, 11:32 PM	#916
Lower Registered User Join Date: Feb 2012 Location: Depew, OK Posts: 204	Re: 1969 Short Wide Looking good! __________________ ~Jon Ol Green 1970 K10ish LWB,454/400/205, been in family since new. My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=516056

04-13-2012, 12:09 PM	#917
smoknbarrels Registered Mail Join Date: Jun 2006 Location: Alberta, Canada Posts: 513	Re: 1969 Short Wide went through most of the pages.. such a nice clean build! that cab is turning out great, even though the PO created a bit more work for ya. __________________ '67 chev 496, lwb to swb, bagged - pro street project

04-13-2012, 01:37 PM	#918
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1969 Short Wide It's getting there man! Keep at it!



Register or Log In To remove these advertisements.

04-15-2012, 09:48 PM	#920
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide Time for an overdue update. I have been working on the cab. But it has been slow going. This time of year really slows progress, a lot of other things going on. On to the pictures. Got the bottom of the cab painted with Por-15 Got the high hump painted and installed Prepped under the dash for paint Cut the firewall for the old style Vintage/air kit. I will be making a custom billet cover to keep it clean. Made a mount for the DBW pedal. Notice the pedal arm had to be sectioned to get the angle close to the original. Started bodywork on the firewall and epoxy primered __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 04-15-2012 at 09:54 PM.

04-15-2012, 11:02 PM	#921
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Looks good mike!!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

04-15-2012, 11:23 PM	#922
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1969 Short Wide Looking great! Especially the firewall!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-15-2012, 11:42 PM	#923
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 1969 Short Wide Nice progress. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

04-15-2012, 11:52 PM	#924
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 1969 Short Wide Very nice Posted via Mobile Device

04-16-2012, 07:35 AM	#925
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: 1969 Short Wide Looks great Mike, Good job on the pedal mount. __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.