Do you need '64-'66 Chevy Truck Parts? - Page 38 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spr85gmc · 11-19-2009, 12:17 AM

Quote:

Originally Posted by LILRED66

I have a factory GMC gauge cluster with the factory speedo, tach, oil pressure, air pressure, ammeter & fuel. It is in very good condition and complete. If you are interested, I will take some pictures and post here or e-mail them to you.

Thanks for your interest and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

please do

*LILRED66* · 11-19-2009, 02:22 AM

Quote:

Originally Posted by aggie91

Thanks, Tony

15" wheels, no clips. Wheels have bumps to hold a 10 1/8" dia cap. Mine where factory painted white on my 65 when I got it. I was to young to know better when I got it to save them for the future...

Karl:

Thanks for the inquiry, but I sold the last set of non-clip factory dog dish hub caps. They were a little rough, so they may not have worked for your application. I come across them from time-to-time, so I will keep my eyes open for a good, quality set painted or chrome.

blemaire · 11-19-2009, 09:49 PM

Tony
Im looking to price out a cab for a small window '64 stepside. Im in wichita, ks so a short drive up would save me on the shipping. Do you have any that are fairly solid?
thanks Bruce

aggie91 · 11-20-2009, 10:14 AM

Quote:

Originally Posted by LILRED66

Karl:

Thanks for the inquiry, but I sold the last set of non-clip factory dog dish hub caps. They were a little rough, so they may not have worked for your application. I come across them from time-to-time, so I will keep my eyes open for a good, quality set painted or chrome.

Thanks, Tony.

leadsled · 11-20-2009, 11:57 AM

how much for fenders

Charles Ellott · 11-20-2009, 10:07 PM

tony
have any custom cab trim sails for a 65?

Bennydog · 11-20-2009, 10:45 PM

Hello Do you have any good original steering wheels? I have an original wheel trim but need the wheel thanks!

*LILRED66* · 11-21-2009, 04:23 AM

Quote:

Originally Posted by blemaire

Tony
Im looking to price out a cab for a small window '64 stepside. Im in wichita, ks so a short drive up would save me on the shipping. Do you have any that are fairly solid?
thanks Bruce

The best cab I currently have is a 4-5-6 GMC cab, that has been media-blasted and is in red oxide primer. It is a small back window with a low hump. It needs some work on the floorboards, kick panels cab corners & rockers, but very fixable. I can do this work for the cost of patch panels and the labor to install them or sell it, as is. Here are a few pictures.

I have a good Chevy dash for it, that is not shown in the photos. Also, I believe I have a good VIN and title, but I can't remember, for sure. Let me know if you are interested and we can chat on the phone. I have a few other cabs, but I believe this is the best one.

*LILRED66* · 11-21-2009, 04:28 AM

Quote:

Originally Posted by leadsled

how much for fenders

Thanks for the inquiry. I sell good, used, rust-free, dent-free front fenders for $175.00 each, plus shipping, usually around $45.00, via UPS-Ground.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

*LILRED66* · 11-21-2009, 04:30 AM

Quote:

Originally Posted by Charles Ellott

tony
have any custom cab trim sails for a 65?

I have several nice sets of Custom Cab sails for a 4-5-6 Chevy truck. They go for $40.00 per pair, plus shipping, via USPS-Priority Mail.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

*LILRED66* · 11-21-2009, 04:33 AM

Quote:

Originally Posted by Bennydog

Hello Do you have any good original steering wheels? I have an original wheel trim but need the wheel thanks!

I have '60-'65 standard steering wheels, '60-'65 Custom steering wheels, '66 standard steering wheels & '66 Custom steering wheels. What year do you need and what quality?

Please let me know and I will reply accordingly with photos, description and price. Thanks for the opportunity and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future.

*LILRED66* · 11-21-2009, 04:35 AM

Quote:

Originally Posted by spr85gmc

please do

I didn't forget about you. I made myself a note to take a few photos and post them. I will do it on Sunday, when I am at the shop. Thanks for your patience and sorry for my delay.

Bennydog · 11-21-2009, 11:24 AM

I just need a 65 custom cab wheel in good quality Let me know how much shipped to 92883.. Thanks So much!

*LILRED66* · 11-21-2009, 12:52 PM

Quote:

Originally Posted by Bennydog

I just need a 65 custom cab wheel in good quality Let me know how much shipped to 92883.. Thanks So much!

Thanks for the clarification. I need to see if I have a Custom steering wheel, without a chrome horn ring assembly. If so, I will sell it. If not, I don't want to seperate one. I will let you know and thanks for the opportunity.

*LILRED66* · 11-22-2009, 11:34 AM

Quote:

Originally Posted by Bennydog

Hello Do you have any good original steering wheels? I have an original wheel trim but need the wheel thanks!

Bennydog:

I do have a bare Custom steering wheel, without the chrome horn ring assembly. I will take photos of it today and post here on the thread. Thanks for your patience and sorry for the delay.

*LILRED66* · 11-22-2009, 11:36 AM

Quote:

Originally Posted by spr85gmc

please do

Here is what I have, so please let me know if this is what you are looking for.

ironhorse1973 · 11-23-2009, 04:50 PM

I need a Flow Control Valve Spring for a power steering pump. Anybody have one?

Thanks,

Chris V
ironhorse1973@comcast.net

*LILRED66* · 11-23-2009, 07:02 PM

Quote:

Originally Posted by ironhorse1973

I need a Flow Control Valve Spring for a power steering pump. Anybody have one?

Thanks,

Chris V
ironhorse1973@comcast.net

I don't have one of these. Sorry I couldn't help.

**nbrfd007** · 11-23-2009, 09:24 PM

Tony,
Do you have the custom windshield trim for my 62 suburban.
Thanks,
Tim

blemaire · 11-24-2009, 03:42 PM

Quote:

Originally Posted by LILRED66

The best cab I currently have is a 4-5-6 GMC cab, that has been media-blasted and is in red oxide primer. It is a small back window with a low hump. It needs some work on the floorboards, kick panels cab corners & rockers, but very fixable. I can do this work for the cost of patch panels and the labor to install them or sell it, as is. Here are a few pictures.

I have a good Chevy dash for it, that is not shown in the photos. Also, I believe I have a good VIN and title, but I can't remember, for sure. Let me know if you are interested and we can chat on the phone. I have a few other cabs, but I believe this is the best one.

what are you looking to get for the cab as is. I just have this gut feeling that when i blast my current cab its going to fall apart. it has some pretty big patches done to it already and they were done by KS state mechanics.

*LILRED66* · 11-25-2009, 02:41 AM

Quote:

Originally Posted by nbrfd007

Tony,
Do you have the custom windshield trim for my 62 suburban.
Thanks,
Tim

Hey Tim. Good to hear from you. I was wondering if you had gotten to work on that '62. I checked my inventory and the only stainless steel windshield trim I have is for the 4-5-6 Chevy/GMC trucks.

Sorry I couldn't help you with this item, but I sure would like to see some updated pictures of the burb and I am sure the forum members would, as well.

Happy Thanksgiving.

*LILRED66* · 11-25-2009, 02:42 AM

Quote:

Originally Posted by blemaire

what are you looking to get for the cab as is. I just have this gut feeling that when i blast my current cab its going to fall apart. it has some pretty big patches done to it already and they were done by KS state mechanics.

Thanks for your interest. If you want to chat over the phone, give me a call or PM your phone number. I am sure we can work out some type of deal, that works for both of us.

Happy Thanksgiving.

Byronic · 11-25-2009, 08:17 AM

Tony, Do you have a 66 grille? If so how much shipped to 32405? thanks

*LILRED66* · 11-25-2009, 11:57 AM

Quote:

Originally Posted by Byronic

Tony, Do you have a 66 grille? If so how much shipped to 32405? thanks

Painted steel or factory anodized aluminum? Grille shell or complete grille assembly, including mounting brackets, buckets, trim rings, lamps, bezels & harness?

I have all of the above, but I want to make sure I am pricing what you need.

Byronic · 11-25-2009, 02:52 PM

Quote:

Originally Posted by LILRED66

Painted steel or factory anodized aluminum? Grille shell or complete grille assembly, including mounting brackets, buckets, trim rings, lamps, bezels & harness?

I have all of the above, but I want to make sure I am pricing what you need.

Just the painted steel shell.
Thanks

11-19-2009, 09:49 PM	#928
blemaire Registered User Join Date: Nov 2009 Location: Wichita , KS Posts: 13	Re: Do you need '64-'66 Chevy Truck Parts? Tony Im looking to price out a cab for a small window '64 stepside. Im in wichita, ks so a short drive up would save me on the shipping. Do you have any that are fairly solid? thanks Bruce

11-20-2009, 11:57 AM	#930
leadsled Registered User Join Date: Jul 2009 Location: Pottsville Pa Posts: 19	Re: Do you need '64-'66 Chevy Truck Parts? how much for fenders

11-20-2009, 10:07 PM	#931
Charles Ellott Registered User Join Date: Nov 2009 Location: birmingham al Posts: 3	Re: Do you need '64-'66 Chevy Truck Parts? tony have any custom cab trim sails for a 65?

11-20-2009, 10:45 PM	#932
Bennydog Registered User Join Date: Jun 2009 Location: Corona Ca Posts: 94	Re: Do you need '64-'66 Chevy Truck Parts? Hello Do you have any good original steering wheels? I have an original wheel trim but need the wheel thanks! __________________ Grandpas and Dads and now my 1965 C-10 1975 SWB C-10

11-21-2009, 11:24 AM	#938
Bennydog Registered User Join Date: Jun 2009 Location: Corona Ca Posts: 94	Re: Do you need '64-'66 Chevy Truck Parts? I just need a 65 custom cab wheel in good quality Let me know how much shipped to 92883.. Thanks So much! __________________ Grandpas and Dads and now my 1965 C-10 1975 SWB C-10

11-23-2009, 04:50 PM	#942
ironhorse1973 Registered User Join Date: Nov 2009 Location: Fox lake, IL Posts: 8	Re: Do you need '64-'66 Chevy Truck Parts? I need a Flow Control Valve Spring for a power steering pump. Anybody have one? Thanks, Chris V ironhorse1973@comcast.net

11-23-2009, 09:24 PM	#944
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: Do you need '64-'66 Chevy Truck Parts? Tony, Do you have the custom windshield trim for my 62 suburban. Thanks, Tim

11-25-2009, 08:17 AM	#948
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: Do you need '64-'66 Chevy Truck Parts? Tony, Do you have a 66 grille? If so how much shipped to 32405? thanks __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.