What did you do to your truck today part III - Page 39 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pimpston65 · 05-09-2015, 04:21 PM

Bodywork ugg!!! These pieces are from my 65. I plan to finish ALL the bodywork, priming, wet sanding, then it's matte black time. Next week cab meets frame!!!

**_mg** · 05-09-2015, 04:32 PM

Finally got the steering arm loose, good weekend so far! Replacing studs next.

TJ's Chevy · 05-09-2015, 06:23 PM

Quote:

Originally Posted by 61K10

Looks nice TJ--Question--with the shifter that far back, what seat are going to use? Can you move the shifter forward? cool anyway.

According to one of the guys at Proformance powertrain you can use it all the way back there as long as a 3 inch forward shift lever is used. But yes, I can move it to the center if need be....its only another $400 for the stinkin shifter.

pimpston65 · 05-09-2015, 06:33 PM

just a 1/64 scale model, got all the pieces hanging beggin to be painted!!!

pimpston65 · 05-09-2015, 06:35 PM

check out my $20 hood rotissorie jig...

Hugh in NC · 05-09-2015, 09:14 PM

Washed the '63 Thursday evening. Friday, waxed and generally cleaned up real good for the Buggy Festival in Carthage, NC on Saturday, May 9. I thought my truck looked good until I saw some of the other trucks parked around me.

Hugh

Lugnutz65 · 05-09-2015, 10:44 PM

Quote:

Originally Posted by Hugh in NC

Washed the '63 Thursday evening. Friday, waxed and generally cleaned up real good for the Buggy Festival in Carthage, NC on Saturday, May 9. I thought my truck looked good until I saw some of the other trucks parked around me.

Hugh

Hugh,
That's one VERY SWEET lookin' truck you have and it can stand proud in any show. Hold your head high and be proud 'cause it's a great looking truck. Thanks for sharing.

Jeff La · 05-10-2015, 12:38 AM

Looks dang good to me

Pappyx3! · 05-10-2015, 10:19 AM

Quote:

Originally Posted by Hugh in NC

Washed the '63 Thursday evening. Friday, waxed and generally cleaned up real good for the Buggy Festival in Carthage, NC on Saturday, May 9. I thought my truck looked good until I saw some of the other trucks parked around me.

Hugh

Other trucks you took pics of look nice and no disrespect to their owners but I wouldn't take all 3 of them for that 63 of yours.... That's a sweet ride!
Posted via Mobile Device

Pappyx3! · 05-10-2015, 10:24 AM

I spent the day yesterday putting the engine and transmission back in the 62. Looks like I might have to modify the trans crossmember. Try to get some pics this afternoon.
Posted via Mobile Device

LVPhotos · 05-10-2015, 11:27 AM

Hey Pappy, I cut my original manual crossmember out. The old adage "when in doubt, weld alot" was used on my frame. 2 Sawzall blades and couple cut disks.
Been working out of town so making the list and trimmed fenders for ground attack.

Pappyx3! · 05-10-2015, 01:23 PM

Quote:

Originally Posted by LVPhotos

Hey Pappy, I cut my original manual crossmember out. The old adage "when in doubt, weld alot" was used on my frame. 2 Sawzall blades and couple cut disks.
Been working out of town so making the list and trimmed fenders for ground attack.

Man you slammed that one... Looks great! Got a build thread I'd like to see it if possible.
Someone has already taken the MT crossmember out when they put the v8 in. I changed the front crossmember, motor mounts to to an 81 for the disc brakes... Looks like the engine and trans are moved back about an inch or so. I have a cpp tubular crossmember that I'm thinking of using, but will have to see how it fits up.
Posted via Mobile Device

Pappyx3! · 05-12-2015, 08:16 AM

Here's a few pics of the engine/trans back in the 62, and first time it's been back on the floor with all the changes that have been made.

Pappyx4!

lowslow64 · 05-12-2015, 12:21 PM

Experimenting with Buick hinges

DLW · 05-12-2015, 03:03 PM

Got a break and finished fit checking the mild porterbuilt crossmember, DT headers, the LS3 and the CPP drop spindles and Baer brakes. Need to figure out the steering linkage and some bump stops next, pull it all back out and send for powder coating.

TJ's Chevy · 05-12-2015, 10:02 PM

More stuff!

pimpston65 · 05-12-2015, 11:05 PM

Quote:

Originally Posted by TJ's Chevy

More stuff!

hey i have the same systems, hot rod matte black is mine. what color did you choose?

TJ's Chevy · 05-12-2015, 11:46 PM

Quote:

Originally Posted by pimpston65

hey i have the same systems, hot rod matte black is mine. what color did you choose?

Boulevard black.

pimpston65 · 05-13-2015, 03:26 PM

Quote:

Originally Posted by TJ's Chevy

Boulevard black.

nice!!! i should be spraying by months end... also i got my 2 NOS front rubber brake parts in today!!!

wilbur46 · 05-13-2015, 09:57 PM

Finally!!
A ground wire to the body does wonders for my lights (Duh)
I need to rebop a stock steering column, which is a mix of stuff, into a 66 column.
Anyone have a pic of the entire assembly or a link to one?
The components I've got won't go together.
Thanks, W

TJ's Chevy · 05-13-2015, 11:36 PM

Pulled the bed off...getting ready to start the frame off.

TJ's Chevy · 05-14-2015, 04:26 PM

Tore more of it down today. Slowly but surely. Pictures later.

OldChevy61 · 05-14-2015, 05:45 PM

Got the radiator out, heater hoses out, will get the rest of the front off the weekend and motor ready to come out. Also crawled around under a truck in the junkyard and got me a T5 for the build back.

pimpston65 · 05-14-2015, 08:04 PM

Quote:

Originally Posted by OldChevy61

Got the radiator out, heater hoses out, will get the rest of the front off the weekend and motor ready to come out. Also crawled around under a truck in the junkyard and got me a T5 for the build back.

what kind of truck did the T5 come out of?

OldChevy61 · 05-14-2015, 08:12 PM

93,v6 S10.

05-09-2015, 04:21 PM	#951
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: What did you do to your truck today part III Bodywork ugg!!! These pieces are from my 65. I plan to finish ALL the bodywork, priming, wet sanding, then it's matte black time. Next week cab meets frame!!! Attached Images

05-09-2015, 04:32 PM	#952
_mg Active Member Join Date: Jul 2013 Location: Southeast MI Posts: 195	Re: What did you do to your truck today part III Finally got the steering arm loose, good weekend so far! Replacing studs next. Attached Images

05-09-2015, 06:33 PM	#954
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: What did you do to your truck today part III just a 1/64 scale model, got all the pieces hanging beggin to be painted!!! Attached Images

05-09-2015, 06:35 PM	#955
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: What did you do to your truck today part III check out my $20 hood rotissorie jig... Attached Images

05-09-2015, 09:14 PM	#956
Hugh in NC Registered User Join Date: Aug 2014 Location: My Recliner in Rockingham,North Carolina Posts: 102	Re: What did you do to your truck today part III Washed the '63 Thursday evening. Friday, waxed and generally cleaned up real good for the Buggy Festival in Carthage, NC on Saturday, May 9. I thought my truck looked good until I saw some of the other trucks parked around me. Hugh

05-10-2015, 12:38 AM	#958
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: What did you do to your truck today part III Looks dang good to me

05-10-2015, 10:24 AM	#960
Pappyx3! Registered User Join Date: Feb 2014 Location: Stephens City, VA Posts: 326	Re: What did you do to your truck today part III I spent the day yesterday putting the engine and transmission back in the 62. Looks like I might have to modify the trans crossmember. Try to get some pics this afternoon. Posted via Mobile Device

05-10-2015, 11:27 AM	#961
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: What did you do to your truck today part III Hey Pappy, I cut my original manual crossmember out. The old adage "when in doubt, weld alot" was used on my frame. 2 Sawzall blades and couple cut disks. Been working out of town so making the list and trimmed fenders for ground attack. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

05-12-2015, 08:16 AM	#963
Pappyx3! Registered User Join Date: Feb 2014 Location: Stephens City, VA Posts: 326	Re: What did you do to your truck today part III Here's a few pics of the engine/trans back in the 62, and first time it's been back on the floor with all the changes that have been made. Pappyx4! Attached Images __________________ 1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16

05-12-2015, 12:21 PM	#964
lowslow64 Registered User Join Date: Dec 2009 Location: Rockwall Texas Posts: 79	Re: What did you do to your truck today part III Experimenting with Buick hinges Attached Images

05-12-2015, 03:03 PM	#965
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: What did you do to your truck today part III Got a break and finished fit checking the mild porterbuilt crossmember, DT headers, the LS3 and the CPP drop spindles and Baer brakes. Need to figure out the steering linkage and some bump stops next, pull it all back out and send for powder coating.

05-12-2015, 10:02 PM	#966
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III More stuff! Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-13-2015, 09:57 PM	#970
wilbur46 Registered User Join Date: Mar 2015 Location: Sebastopol, Ca. Posts: 46	Re: What did you do to your truck today part III Finally!! A ground wire to the body does wonders for my lights (Duh) I need to rebop a stock steering column, which is a mix of stuff, into a 66 column. Anyone have a pic of the entire assembly or a link to one? The components I've got won't go together. Thanks, W

05-13-2015, 11:36 PM	#971
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Pulled the bed off...getting ready to start the frame off. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-14-2015, 04:26 PM	#972
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Tore more of it down today. Slowly but surely. Pictures later. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw



Register or Log In To remove these advertisements.

05-14-2015, 05:45 PM	#973
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III Got the radiator out, heater hoses out, will get the rest of the front off the weekend and motor ready to come out. Also crawled around under a truck in the junkyard and got me a T5 for the build back.

05-14-2015, 08:12 PM	#975
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III 93,v6 S10.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.