GMC cab/clip - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblockorange · 08-27-2007, 03:48 PM

Thanks Jim for stopping to buy the other cab! I still have a lot of extra parts plus the cab/clip to sell! Rob

bigblockorange · 08-30-2007, 08:12 AM

I just added parts to the deal I will part the truck out!

msgross · 08-30-2007, 10:45 AM

Rob, I still need a nice pass door and tailgate....

*steveshow* · 08-30-2007, 02:01 PM

I need the clips that hold the eyebrows on. I can't find these being reproduced anywhere and all but one of mine are either rusted to pieces or broken. I also need some headlight adjusters (plastic insert).

short step · 08-30-2007, 03:04 PM

are the cab & doors in decent shape and how much for them? i dont need the frame or bed
bob

bigblockorange · 08-30-2007, 03:56 PM

Short step I'll let you know a price in a few days I've lined up sales for a lot of what I have, not sure how bad the rust is up your way for around here it is a nice project to me. I've redone worse!!!!!!!!! BBO

bigblockorange · 09-06-2007, 03:35 PM

Ttt

bigblockorange · 09-18-2007, 08:05 AM

I'm going to strip the cab for parts to take to Fall Carlisle anyone need anythig let me know. Rob

67-72williso · 09-18-2007, 09:45 PM

I think I saw that blue GMC in Enola. I hauled some dirt in for the guy right below you to fill in his bank.
Later, Willis

bigblockorange · 10-02-2007, 03:19 PM

I will be on the turnpike field this weekend at fall Carlisle!!!!!!!

bigblockorange · 10-08-2007, 08:18 AM

Last chance if you need anything off these cabs!

msgross · 10-08-2007, 10:32 AM

any luck at Carlisle?

I still need a driver side front fender and two good inner fenders... GMC fender should work if you have one...

bigblockorange · 10-08-2007, 01:42 PM

Hey Mike get a hold of me this week leave a message I'll be around Sat/Sun. Rob

billdo · 10-16-2007, 05:46 PM

hey hows the cab any of them good i nned one and live in newyork

70' GMC · 10-28-2007, 04:42 PM

do you still have the parts?

bigblockorange · 10-30-2007, 01:34 PM

Sorry guys I had to step out of town for a bit and just got to my emails I sent 2 trucks to the scrap yard last month I only have the GMC left to sell let me know if anyone needs anything off of it I will crush it soon. Rob

bigblockorange · 03-22-2008, 09:45 PM

Anyone need this stuff? Make offer.

msgross · 03-23-2008, 01:23 AM

what's left on it? I still need a driver fender, pass door, tailgate, front wood floor panel, better cab would be nice but I want to keep my VIN...

Im still in Alabama for another 3 weeks...

dknoth05 · 03-23-2008, 06:43 AM

I could use a good driver door, and driver bedside, and possibly a front bed panel for wood floor, if you have anything let me know. Thanks, Dan

***Josh*** · 03-24-2008, 12:38 AM

Quote:

Originally Posted by bigblockorange

Anyone need this stuff? Make offer.

Please Resubscribe in order to continue selling. This post is closed until you PM that you have resubscribed.

Josh

08-27-2007, 03:48 PM	#76
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Thanks Jim for stopping to buy the other cab! I still have a lot of extra parts plus the cab/clip to sell! Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

08-30-2007, 08:12 AM	#77
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I just added parts to the deal I will part the truck out! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

08-30-2007, 10:45 AM	#78
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: GMC cab/clip Rob, I still need a nice pass door and tailgate.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-30-2007, 02:01 PM	#79
steveshow Account Suspended Join Date: Aug 2007 Location: Austin, Tx Posts: 81	Re: GMC cab/clip I need the clips that hold the eyebrows on. I can't find these being reproduced anywhere and all but one of mine are either rusted to pieces or broken. I also need some headlight adjusters (plastic insert).

08-30-2007, 03:04 PM	#80
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: GMC cab/clip are the cab & doors in decent shape and how much for them? i dont need the frame or bed bob

08-30-2007, 03:56 PM	#81
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Short step I'll let you know a price in a few days I've lined up sales for a lot of what I have, not sure how bad the rust is up your way for around here it is a nice project to me. I've redone worse!!!!!!!!! BBO __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!! Last edited by bigblockorange; 08-30-2007 at 03:58 PM.

09-06-2007, 03:35 PM	#82
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Ttt __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

09-18-2007, 08:05 AM	#83
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I'm going to strip the cab for parts to take to Fall Carlisle anyone need anythig let me know. Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

09-18-2007, 09:45 PM	#84
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: GMC cab/clip I think I saw that blue GMC in Enola. I hauled some dirt in for the guy right below you to fill in his bank. Later, Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

10-02-2007, 03:19 PM	#85
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I will be on the turnpike field this weekend at fall Carlisle!!!!!!! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

10-08-2007, 08:18 AM	#86
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Last chance if you need anything off these cabs! __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

10-08-2007, 10:32 AM	#87
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: GMC cab/clip any luck at Carlisle? I still need a driver side front fender and two good inner fenders... GMC fender should work if you have one... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 10-08-2007 at 10:33 AM.

10-08-2007, 01:42 PM	#88
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Hey Mike get a hold of me this week leave a message I'll be around Sat/Sun. Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

10-16-2007, 05:46 PM	#89
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: GMC cab/clip hey hows the cab any of them good i nned one and live in newyork

10-28-2007, 04:42 PM	#90
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: GMC cab/clip do you still have the parts? __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!



Register or Log In To remove these advertisements.

10-30-2007, 01:34 PM	#91
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Sorry guys I had to step out of town for a bit and just got to my emails I sent 2 trucks to the scrap yard last month I only have the GMC left to sell let me know if anyone needs anything off of it I will crush it soon. Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

03-22-2008, 09:45 PM	#92
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Anyone need this stuff? Make offer. __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!

03-23-2008, 01:23 AM	#93
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: GMC cab/clip what's left on it? I still need a driver fender, pass door, tailgate, front wood floor panel, better cab would be nice but I want to keep my VIN... Im still in Alabama for another 3 weeks... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-23-2008, 06:43 AM	#94
dknoth05 Registered User Join Date: Dec 2007 Location: Vandalia, Ohio Posts: 13	Re: GMC cab/clip I could use a good driver door, and driver bedside, and possibly a front bed panel for wood floor, if you have anything let me know. Thanks, Dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.