my 1970 blazer build=4wd to 2wd - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrodhomi · 02-04-2009, 02:42 PM

Quote:

Originally Posted by toplesskayfiver

thanks to evryone who responded! here are some NON-dusty frame pics! enjoi!

question: do you all think i could flipp my blazer tub on one of its side quarter panels onto a matress without it getting damaged??? has anyone done this before?

]

You in the Sac area? I could get a few guys together to help.

toplesskayfiver · 02-04-2009, 05:16 PM

[quote=hotrodhomi;3124660]I would not flip my tub on the side to lay it down, mattress or not. especially without welding some braces in there to keep it straight. What are you trying to do? QUOTE]

Quote:

Originally Posted by Big J

I wouldn't. Too much of a chance for damage. Take a look at the last few posts in my thread. The engine crane picks it up just fine and you can go pretty high to get under if thats what your wanting to do.

Quote:

Originally Posted by hotrodhomi

You in the Sac area? I could get a few guys together to help.

big thanks 2 u homi but im in southern california.

i want to be able to clean the underbody easier standing instead of laying on a creeper, very uncomfortable, to me it doesnt seem like it would take on any damage what do you guys thing will flex or get damaged?

another question is how hard is it to just take the bed sides apart??

toplesskayfiver · 02-06-2009, 01:46 PM

....

toplesskayfiver · 02-06-2009, 01:50 PM

boy u guys were wrong this time...................................

and im a much younger member with a "non-real 2wd" wut do i know ahhaha

71jimmy · 02-06-2009, 08:29 PM

Hey, that looks awsome. Good job. But I wouldn't celebrate until I had it put back together.

OARNGESI · 02-06-2009, 09:09 PM

Hey careful you dont it want to fall over on you

toplesskayfiver · 02-08-2009, 07:08 AM

i know i got it all tied up to the framing ffo the walls and currentl working on building a couple of arms for the body roller to flip it and hopefully make it alott f*%$#@% safer

Big J · 02-08-2009, 09:39 AM

Not wrong really just leaning toward not damaging a nice tub or getting hurt in the process. Thats a lot of weight on that beside, matress or not. Just be cautious.

toplesskayfiver · 02-09-2009, 03:10 AM

i present to you "the blazer flipper"

Big J · 02-09-2009, 03:38 PM

Good job! That is the way to get it done. Ya got one fine lookin' flipper right there.

71jimmy · 02-09-2009, 03:46 PM

Now that's slick

Simple and functional. How bout some details, what you used, how long it took to make etc.

VA72C10 · 03-11-2009, 03:22 AM

Great work so far...good inspiration for me to one day tackle a 4wd to 2wd conversion.

VA72C10 · 03-23-2009, 12:20 PM

Any updates?

toplesskayfiver · 03-29-2009, 05:29 AM

yezzir! hey kev now your truck is a real work of art

just kidding but you get the picture

i hope u dont mind i shaved the sidemarkers, got peanut butter all over the interior, and gave it a nose job

toplesskayfiver · 04-10-2009, 02:49 PM

Quote:

Originally Posted by 71jimmy

Now that's slick

Simple and functional. How bout some details, what you used, how long it took to make etc.

the body roller was already made. it took 2 days to build the flipping arms between 2 guys, it wouldve be nice to have used some thicker metal square tubing, but it holds up just fine! once i put the frame back under the body tub this roller/flipper might be out for grabs???$$$$????

OARNGESI · 10-14-2009, 08:57 PM

Any progress

made2drag · 07-24-2012, 04:11 PM

ttt

toplesskayfiver · 11-27-2013, 12:03 AM

Sorry if I haven't been replying.. but u just signed back into my profile again.. need to figure out why chevy ls 5.3 2007 truck engine starts but shuts off?? Just finished swap and cranks perfectly

gringoloco · 11-27-2013, 12:53 AM

VATS- Vehicle Anti-Theft System. It will allow it to start, but not run. Must be programmed out of the PCM.

toplesskayfiver · 11-29-2013, 07:35 PM

Cool thanks. What we were thinking too. Going to have to get it flashed / programmed correct!? Lt1.com a good place to send the computer to?

02-06-2009, 01:46 PM	#78
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd .... Last edited by toplesskayfiver; 02-06-2009 at 01:51 PM.

02-06-2009, 01:50 PM	#79
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd boy u guys were wrong this time................................... and im a much younger member with a "non-real 2wd" wut do i know ahhaha

02-06-2009, 08:29 PM	#80
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Re: my 1970 blazer build=4wd to 2wd Hey, that looks awsome. Good job. But I wouldn't celebrate until I had it put back together. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

02-06-2009, 09:09 PM	#81
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: my 1970 blazer build=4wd to 2wd Hey careful you dont it want to fall over on you __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

02-08-2009, 07:08 AM	#82
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd i know i got it all tied up to the framing ffo the walls and currentl working on building a couple of arms for the body roller to flip it and hopefully make it alott f*%$#@% safer

02-08-2009, 09:39 AM	#83
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: my 1970 blazer build=4wd to 2wd Not wrong really just leaning toward not damaging a nice tub or getting hurt in the process. Thats a lot of weight on that beside, matress or not. Just be cautious. __________________ BAZINGA! My Build

02-09-2009, 03:10 AM	#84
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd i present to you "the blazer flipper"

02-09-2009, 03:38 PM	#85
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: my 1970 blazer build=4wd to 2wd Good job! That is the way to get it done. Ya got one fine lookin' flipper right there. __________________ BAZINGA! My Build

02-09-2009, 03:46 PM	#86
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Re: my 1970 blazer build=4wd to 2wd Now that's slick Simple and functional. How bout some details, what you used, how long it took to make etc. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

03-11-2009, 03:22 AM	#87
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: my 1970 blazer build=4wd to 2wd Great work so far...good inspiration for me to one day tackle a 4wd to 2wd conversion. __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-23-2009, 12:20 PM	#88
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: my 1970 blazer build=4wd to 2wd Any updates? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-29-2009, 05:29 AM	#89
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd yezzir! hey kev now your truck is a real work of art just kidding but you get the picture i hope u dont mind i shaved the sidemarkers, got peanut butter all over the interior, and gave it a nose job

10-14-2009, 08:57 PM	#91
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: my 1970 blazer build=4wd to 2wd Any progress __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

07-24-2012, 04:11 PM	#92
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: my 1970 blazer build=4wd to 2wd ttt __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

11-27-2013, 12:03 AM	#93
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd Sorry if I haven't been replying.. but u just signed back into my profile again.. need to figure out why chevy ls 5.3 2007 truck engine starts but shuts off?? Just finished swap and cranks perfectly



Register or Log In To remove these advertisements.

11-27-2013, 12:53 AM	#94
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: my 1970 blazer build=4wd to 2wd VATS- Vehicle Anti-Theft System. It will allow it to start, but not run. Must be programmed out of the PCM. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-29-2013, 07:35 PM	#95
toplesskayfiver K5-2WD=C5 Join Date: Dec 2006 Location: California Posts: 69	Re: my 1970 blazer build=4wd to 2wd Cool thanks. What we were thinking too. Going to have to get it flashed / programmed correct!? Lt1.com a good place to send the computer to?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.