post latest 1/4 and 1/8 mile times and 60ft. - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod 80 · 01-06-2010, 04:03 PM

Quote:

Originally Posted by paul1969

dont feel bad i thought i done all the good on mine till i rolled the scales at baytown. i cried all the way back to the trailer. it weighed 3525 with me in it. so i say fatman fab a little fiberglass where you can.if that doesnt work then NOS fogger and pill it till you kill it.

Hey shoot me a PM next time you go im only 3 miles from the track . Anyway here is an action shot for ya .

paul1969 · 02-06-2010, 09:38 PM

hotrod sorry for not gettin back sooner i been back and forth with dr.s lately. that would be pretty cool if we could get a few together and go punish some vetts and mustangs.you ever go to hmp or lonestar ?

hotrod 80 · 02-11-2010, 10:35 PM

Yea , i like friday nights at HRP and im a sunday nighter at HMP when im off work . Im a few months out on mine , these guys dogged me so hard for the Luv , i had to build a full size

.

djracer · 02-12-2010, 12:41 AM

Quote:

Originally Posted by hotrod 80

Yea , i like friday nights at HRP and im a sunday nighter at HMP when im off work . Im a few months out on mine , these guys dogged me so hard for the Luv , i had to build a full size

.

I'm glad to here you are doing it! We need a build thread.

hotrod 80 · 02-14-2010, 08:15 PM

Quote:

Originally Posted by djracer

I'm glad to here you are doing it! We need a build thread.

Here ya go .
http://67-72chevytrucks.com/vboard/s...d.php?t=368137

71chevytruckguy · 03-01-2010, 03:14 PM

Went to the track for time of season, made a bunch of chassis changes and took a lot of wieght out. 8.000 @ 86.45mph. 1.62 60'. Its going 7's next weekend. Chris.

69trk · 03-01-2010, 11:09 PM

good job. I can't wait to get to the track...

team39763 · 03-02-2010, 03:14 PM

Quote:

Originally Posted by 71chevytruckguy

Went to the track for time of season, made a bunch of chassis changes and took a lot of wieght out. 8.000 @ 86.45mph. 1.62 60'. Its going 7's next weekend. Chris.

Congrats. Got any videos of it?

71chevytruckguy · 03-06-2010, 02:21 AM

Quote:

Originally Posted by team39763

Congrats. Got any videos of it?

Thanks man. Not yet, brought the camera with but was too busy gettin little issuses figured to get any. Headin back sunday and i'll be sure to get some once i hit the sevens! Chris.

71chevytruckguy · 03-20-2010, 07:48 PM

7.900 @ 87.427mph, 1.612 60', 5.049 330' Its still got more in it. Chris.

71chevytruckguy · 03-29-2010, 12:43 AM

7.807 @ 88.370, 1.607 60', 4.990 330' Keeps gettin faster! Chris.

5.7L JWL · 03-31-2010, 11:47 PM

No, It's not a FullSize but at least it's something to have fun in and I've got my flamesuit on so I'm ready for the remarks!

LET EM RIP.

'87 TOYOTA
GMPP Crate engine 383 Stroker
Ladder Bar
Neal Racing Transmissions Braket Glide
Neal Chance Converter
Precision Performance Products Shifter
2535#
Foot Braking for now!

Got a new PB for me as well as a TB for the Truck!

It's only my second time to the Track (Driving) and my 4th time down the Track in anything w/4 wheels.

R/T -.005
60' 1.582
330' 4.508
1/8th 7.03 @ 96.30 MPH

The previous best for the Truck was a 7.17 @ 96.?? MPH Step-Dad driving.

My old PB was 2nd time down the track
R/T .406
60' 1.682
330' 4.693
1/8th 7.24 @ 96.09 MPH

We are having a problem with the tires slipping on wheels so we are about to stud the wheels and practice leaving on the Trans brake next.

All previous runs have been Foot Braking.

Jay

Nick's81 · 05-15-2010, 11:44 PM

well here we go my best pass yet 64 c-10 327 w/babby heads (305 171 valve 68 cc) th350 shift kit 12blt 373 and 275/60/15
r/t .193
60' 2.186
330 6.151
1/8 9.462 @ 73.63
1000 12.380
1/4 hit brakes and broke out 14.941

shortbed70 · 05-29-2010, 01:22 AM

Friend of mine let me drive his tonight since I hauled it for him. Havent raced since I was a senior in high school 13 yrs ago. 74 chevy long bed\355\PG trans\4.10 gears\ 26-10.5 et drags.

-.035 rt
1.935 60ft
74.14 mph 8.952

1/8th mile

shortbed70 · 05-29-2010, 11:43 PM

Wll broke out first round and ran a 8.637 with 1.87 60 @ 75 mph. and the tires are 26-11.50-15 et drags 13psi.

BADGMC · 08-14-2010, 08:42 PM

Went 10.11@136.6 a couple weeks ago. The 1/8 was 6.54@109 and 60ft was 1.64. Track was greasy due to it being 90 degrees and rain the night prior so really not a bad day come to think of it. This was leaving on the footbrake with 0psi and 18 psi by the end of the track so there is still some left. Now I just switched to E85 so we'll see what happens next time.

69trk · 08-14-2010, 11:17 PM

nice times. Looks like there's more in it with that 60'.

BADGMC · 08-15-2010, 12:21 AM

Yeah, it has more all around in it. Usually the 60's are mid 1.5's. Best of 1.53 with a lot less power than I have now so it's just a matter of playing around with things. Going back to the track next weekend. Hopefully it will hook and I can bring the boost in quicker and then the et should fall nicely if that works. Should be interesting as with the E85 I can tell it has more power just driving around.

69trk · 08-15-2010, 12:30 AM

I have got to get me a turbo

kpeztruck · 09-30-2010, 09:42 AM

60' 1.34
1/8 5.50
130 mph
stock trailing arms w/coilovers, and anti-roll bar.
stock front suspension with moroso trick springs and QA1 single adjustable
shocks.
540 BBC 2 foggers total 400hp.

dougminton · 11-29-2010, 01:37 PM

Drove it to the track a few weeks ago

My best run was
60' 2.4
1/8 84 mph
1/4 13.46 @104

better than I expected with 3.08 gears (4.11s coming this winter)

3r!c84 · 12-19-2010, 12:21 AM

Quote:

Originally Posted by dougminton

Drove it to the track a few weeks ago

My best run was
60' 2.4
1/8 84 mph
1/4 13.46 @104

better than I expected with 3.08 gears (4.11s coming this winter)

tell us about the set up?

dougminton · 12-20-2010, 01:31 PM

.03 over 454 with big valve oval ports and a solid cam (.615 lift) TH400
open diff with 3.08s for now. 32 inch tall tires- went through the lights in second gear at 104.

3r!c84 · 12-20-2010, 02:01 PM

Any problem with traction
Posted via Mobile Device

dougminton · 12-20-2010, 02:50 PM

It spun just a little. I think my trailing arms being a foot shorter than stock helps it plant the tires (used to be a longbed leaf spring truck)

02-06-2010, 09:38 PM	#77
paul1969 Registered User Join Date: Jul 2009 Location: spring,tx Posts: 17	Re: post latest 1/4 and 1/8 mile times and 60ft. hotrod sorry for not gettin back sooner i been back and forth with dr.s lately. that would be pretty cool if we could get a few together and go punish some vetts and mustangs.you ever go to hmp or lonestar ? __________________ 69 stepside 489ci 60ft---- 1.46 660ft--- 6.570@105.95 1320ft-- 10.37@127.01

02-11-2010, 10:35 PM	#78
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: post latest 1/4 and 1/8 mile times and 60ft. Yea , i like friday nights at HRP and im a sunday nighter at HMP when im off work . Im a few months out on mine , these guys dogged me so hard for the Luv , i had to build a full size . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

03-01-2010, 03:14 PM	#81
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: post latest 1/4 and 1/8 mile times and 60ft. Went to the track for time of season, made a bunch of chassis changes and took a lot of wieght out. 8.000 @ 86.45mph. 1.62 60'. Its going 7's next weekend. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

03-01-2010, 11:09 PM	#82
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: post latest 1/4 and 1/8 mile times and 60ft. good job. I can't wait to get to the track... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

03-20-2010, 07:48 PM	#85
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: post latest 1/4 and 1/8 mile times and 60ft. 7.900 @ 87.427mph, 1.612 60', 5.049 330' Its still got more in it. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's Last edited by 71chevytruckguy; 03-20-2010 at 07:48 PM.

03-29-2010, 12:43 AM	#86
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: post latest 1/4 and 1/8 mile times and 60ft. 7.807 @ 88.370, 1.607 60', 4.990 330' Keeps gettin faster! Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

03-31-2010, 11:47 PM	#87
5.7L JWL Registered User Join Date: Dec 2006 Location: Atlanta Posts: 96	Re: post latest 1/4 and 1/8 mile times and 60ft. No, It's not a FullSize but at least it's something to have fun in and I've got my flamesuit on so I'm ready for the remarks! LET EM RIP. '87 TOYOTA GMPP Crate engine 383 Stroker Ladder Bar Neal Racing Transmissions Braket Glide Neal Chance Converter Precision Performance Products Shifter 2535# Foot Braking for now! Got a new PB for me as well as a TB for the Truck! It's only my second time to the Track (Driving) and my 4th time down the Track in anything w/4 wheels. R/T -.005 60' 1.582 330' 4.508 1/8th 7.03 @ 96.30 MPH The previous best for the Truck was a 7.17 @ 96.?? MPH Step-Dad driving. My old PB was 2nd time down the track R/T .406 60' 1.682 330' 4.693 1/8th 7.24 @ 96.09 MPH We are having a problem with the tires slipping on wheels so we are about to stud the wheels and practice leaving on the Trans brake next. All previous runs have been Foot Braking. Jay __________________ '98 C-1500 ECSB 5.7L Edelbrock shorty headers Ceramic, Stage 8 locking header bolts, Magnaflow S/S y-pipe w/converters, Magnaflow S/S Cat-Back Exhaust (DI 2.5" / SO 3.5" w/ 4" Tip.) Synthetic Fluids throughout. Polished TB with Blade removed, ASP Pullies, Performance Distributors "Vortec Firepower" Ign. Kit, BlackBearPerformance Tuned PCM '84 Kawasaki KX-80 "Mint" Last edited by 5.7L JWL; 04-01-2010 at 12:01 AM.

05-15-2010, 11:44 PM	#88
Nick's81 Registered User Join Date: Jan 2010 Location: Medford Or. Posts: 78	Re: post latest 1/4 and 1/8 mile times and 60ft. well here we go my best pass yet 64 c-10 327 w/babby heads (305 171 valve 68 cc) th350 shift kit 12blt 373 and 275/60/15 r/t .193 60' 2.186 330 6.151 1/8 9.462 @ 73.63 1000 12.380 1/4 hit brakes and broke out 14.941

05-29-2010, 01:22 AM	#89
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: post latest 1/4 and 1/8 mile times and 60ft. Friend of mine let me drive his tonight since I hauled it for him. Havent raced since I was a senior in high school 13 yrs ago. 74 chevy long bed\355\PG trans\4.10 gears\ 26-10.5 et drags. -.035 rt 1.935 60ft 74.14 mph 8.952 1/8th mile __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 05-29-2010 at 01:26 AM.

05-29-2010, 11:43 PM	#90
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: post latest 1/4 and 1/8 mile times and 60ft. Wll broke out first round and ran a 8.637 with 1.87 60 @ 75 mph. and the tires are 26-11.50-15 et drags 13psi. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-14-2010, 08:42 PM	#91
BADGMC Registered User Join Date: Jan 2004 Location: Duluth, Mn Posts: 162	Re: post latest 1/4 and 1/8 mile times and 60ft. Went 10.11@136.6 a couple weeks ago. The 1/8 was 6.54@109 and 60ft was 1.64. Track was greasy due to it being 90 degrees and rain the night prior so really not a bad day come to think of it. This was leaving on the footbrake with 0psi and 18 psi by the end of the track so there is still some left. Now I just switched to E85 so we'll see what happens next time. __________________ 85 GMC 1/2 ton LWB 4150lbs. 383 SBC with Twin MPT70 Turbos 850 CSU carb TH375 3.70 gears Ultimate 10" Converter 10.11@136.6 with 1.64 60ft. on 10.5-31-15W Last edited by BADGMC; 08-14-2010 at 09:10 PM.

08-14-2010, 11:17 PM	#92
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: post latest 1/4 and 1/8 mile times and 60ft. nice times. Looks like there's more in it with that 60'. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

08-15-2010, 12:21 AM	#93
BADGMC Registered User Join Date: Jan 2004 Location: Duluth, Mn Posts: 162	Re: post latest 1/4 and 1/8 mile times and 60ft. Yeah, it has more all around in it. Usually the 60's are mid 1.5's. Best of 1.53 with a lot less power than I have now so it's just a matter of playing around with things. Going back to the track next weekend. Hopefully it will hook and I can bring the boost in quicker and then the et should fall nicely if that works. Should be interesting as with the E85 I can tell it has more power just driving around. __________________ 85 GMC 1/2 ton LWB 4150lbs. 383 SBC with Twin MPT70 Turbos 850 CSU carb TH375 3.70 gears Ultimate 10" Converter 10.11@136.6 with 1.64 60ft. on 10.5-31-15W

08-15-2010, 12:30 AM	#94
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: post latest 1/4 and 1/8 mile times and 60ft. I have got to get me a turbo __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

09-30-2010, 09:42 AM	#95
kpeztruck Registered User Join Date: Sep 2010 Location: Canton, GA Posts: 229	Re: post latest 1/4 and 1/8 mile times and 60ft. 60' 1.34 1/8 5.50 130 mph stock trailing arms w/coilovers, and anti-roll bar. stock front suspension with moroso trick springs and QA1 single adjustable shocks. 540 BBC 2 foggers total 400hp.



Register or Log In To remove these advertisements.

11-29-2010, 01:37 PM	#96
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: post latest 1/4 and 1/8 mile times and 60ft. Drove it to the track a few weeks ago My best run was 60' 2.4 1/8 84 mph 1/4 13.46 @104 better than I expected with 3.08 gears (4.11s coming this winter) __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

12-20-2010, 01:31 PM	#98
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: post latest 1/4 and 1/8 mile times and 60ft. .03 over 454 with big valve oval ports and a solid cam (.615 lift) TH400 open diff with 3.08s for now. 32 inch tall tires- went through the lights in second gear at 104. __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

12-20-2010, 02:01 PM	#99
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: post latest 1/4 and 1/8 mile times and 60ft. Any problem with traction Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

12-20-2010, 02:50 PM	#100
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: post latest 1/4 and 1/8 mile times and 60ft. It spun just a little. I think my trailing arms being a foot shorter than stock helps it plant the tires (used to be a longbed leaf spring truck) __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.