Parting out 67 LWB AC Cab

[RoadRacer]

I just need the plate that holds the outer rubber seal up into the instrument cluster as shown in the circled area in the pic below; it attaches to the two threaded holes on the lower edge of the dashboard.

$12 for that and the washer nozzles is a done deal. PM me payment info for PayPal if you have it, or other payment info and I'll have it to you tonight.

Thanks.

[bills68panel]

jay , bill here I need those brackets I think you know what i'm looking for. you have my # please give me a call thanks.

[jayharrell]

I know what your talking about now. Fender support brakets. CLT has dibs on the core support, not sure if he wants those braces as well.

I'll get a pic of the washer nossel assmy to make sure its all you need.

[oldgold70c10]

IF CLTBurban passes on the core support, what would be shipping to 74059? Thanks!

[CLTBurban]

Jay:

I do want the radiator support, but I will not need the fender brackets. I'm good if you wish to sell those to someone else.

Thanks,
Scott

[RoadRacer]

Here's a couple of better pictures of the column bracket and the washer nozzles I'm looking for; let me know, thanks.

[jayharrell]

bill: how about 10 shipped for the brakets

roadracer: perfect, i pulled them last night i'll ship them out as soon as i can. PM sent.

thunder : gotta hit the chevy house this morning, i'll have pics of the trim after lunch.

hotfun: still have these panels.

[michael bustamante]

passanger fender condition and the guage cluster? 87121

[Lugnut64052]

How about the master/booster/proportioning valve/actuator rod to 64052?

Thanks in advance.

[RoadRacer]

Jay -

No PM received so far, but let me know and I'll PayPal the $.

[RoadRacer]

PayPal payment sent for the steering column plate and washer nozzles.

[jayharrell]

SOLD column plate and washer nozzles. Thanks roadracer. will ship out monday.

[jayharrell]

Sorry for the lapse in resonses. Had a little chainsaw and yellow jacket swarm incident yesterday morning. I'll catch up on everyones requests tonight for sure.

Thanks guys

[jayharrell]

mahanian : UPS will pick up the fender and grill tomorrow. Will PM you tracking #s.

thunder : got some pics, only 3 small dings on the rear window trim. 2 in the middle on the bottom, and on on the passenger around the top. This pic shows all 3 spots, almost hard to tell. All in all pretty good. Will get more pics if you need
http://i276.photobucket.com/albums/k...PICT0490-1.jpg
Hows $30 shipped sound??

cltburb : the wheel and spot will ship tomorrow. Heres my bucket of pics for the core. The core pics are the first 5 or 6 in the album. When i pulled the fender wells yesterday out the rust is a little more then i thought. But the passenger side under the batt is the only spot. Not rusted through on the driver or under the rad support bolts. Not terrible, fixable compared to a new one. Thinkin 60 +the ride? Looking into FedEx freight if you have a business addy. Could be under $20 if you do.
http://s276.photobucket.com/albums/k...ek/67%20Chevy/

jpttalor: I'll get some detailed pics after work on that hood.

roadracer: boxed up the bracket and nozzles, will ship USPS in the morning.

michael : fender and gauge cluster are already sold. Let me know if you need anything else.

lugnut : I'll pull the booster assmy and prop valve after work. Will get you some pricing on it along with pics.

Thanks to everyone. I'll get tracking info PMed for the stuff going out Monday, along with pics of whats up in the air.

Thanks again.

[Lugnut64052]

Ouchy-wawa.
Same thing happened to me one time-- loft full of musty old hay, was cleaning it out and buried a hayhook right into the nest. I think I got hit about seven or eight times.

Originally Posted by jayharrell

lugnut : I'll pull the booster assmy and prop valve after work. Will get you some pricing on it along with pics.

Thanks muchly. I can wait a day or two. Your hand is likely to be pretty sore tomorrow.

[CLTBurban]

Jay:
After looking at the photos, the radiator support is a little more rusty that I was expecting. Feel free to sell it to someone else. Many thanks for the wheel and spot. I can't wait to receive them.

Good luck with the bee stings! Sorry to hear of your mishap.
Scott

[jayharrell]

A little off the wall, but heres a pic of my hand. I was prepping some brush i cleared about a month ago for the chipper with the chainsaw, and didn't even notice the nest. got 5 hard yellow jacket stings on my left hand before i even knew what was going on, 3 on my pointer finger, 1 on my middle, and one right in the crease of my thumb. There was probably 20+ on the chainsaw motor. heres a pic of a days worth of deflation and many benadrill. Anyhow. I'll play my fiddle for some sympathy.

[mahanian]

Wow, That doesn't look like much fun! Sorry to hear about the yellow jacket encounter. Count your blessings that you aren't deathly allergic to them!


Thanks for the update. Put me in line for the rear window trim if it gets to me.

Thanks again!

[jayharrell]

mahanian: it'll take more then some bugs to put me down. But i didn't realize you were the billiet radio plate man untill the other day. Great work. Looks like its all going well for you. Congrats.

[nightmare]

Dang Jay, you know your not supposed to play with those nests. I'm glad you are doing ok, and I hope that your little one wasn't around for the excitement. How's he doing with that cat?

[mahanian]

Thanks, they take a lot of time but I think they look great in the end

[jayharrell]

clt: yeah, it was a little more wore out then i thought. Once i tried to break the inner fender loose it just tore to pieces. But the spot and wheel shipped today. Should have it this week.

mahanian : fender and grill were picked up around 5 today also. hope you enjoy.

nightmare: hank was inside at the time of the wasp ordeal. But his cat turned out to be a runaway from some people up the street who just moved in. They have some little ones too. So now we've struck up a relationship where we set around and talk about how nice our trucks would be if we didn't have kids. LOL

[bestchevyfan]

Hi, Is The Door Glass Factory Tint ? If So, What Would It Cost For Both Shipped To 35816 A Business Address.thanks,buddy

[mrh]

Jay, sent you a pm.

[mrh]

Originally Posted by mrh

Jay, sent you a pm.

oops guess I didnt follow the rules. I'm intersted in the hood and both doors. PM sent.