Scotts 67-72 firewall - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 12-20-2008, 05:39 PM

Quote:

Originally Posted by Scottshotrods

On a side note we do have a bone stock truck out back we will have our
bolt in set for that truck in january 2009.We can post some pictures of these
when we get this closer.[/url]

Very interested in these!

Quote:

Originally Posted by Scottshotrods

We do not have a cowl panel that has our filler panel already installed
at this time.We will offer that only if we can get enough people who would want to buy one.Please post on here,on how much you guys would want to
spend to get one.
Justin
www.scottshotrods.com

$350-400 sounds fair to me...

Edit: Do you guys have any pics of your raised rear tubs?

12-20-2008, 07:32 PM

mark me down for a set of inner fenders! that'll cut down some fab time for me!!

Scottshotrods · 12-21-2008, 12:28 AM

Quote:

Originally Posted by sddwtcb

mark me down for a set of inner fenders! that'll cut down some fab time for me!!

how much would you want to pay for a set of our
custom fender wells.Give us some ideas
Justin
www.scottshotrods.com

n2billet · 12-21-2008, 01:01 AM

Quote:

Originally Posted by Scottshotrods

how much would you want to pay for a set of our
custom fender wells.Give us some ideas
Justin
www.scottshotrods.com

For me it depends on how they look and how they mount.......are you going to make them go all the way up to the lip of the fender? Are they going to be wheeled or just a simple brake? How will they mount to the core support or will they go that far?

Scottshotrods · 12-21-2008, 08:43 PM

Quote:

Originally Posted by n2billet

For me it depends on how they look and how they mount.......are you going to make them go all the way up to the lip of the fender? Are they going to be wheeled or just a simple brake? How will they mount to the core support or will they go that far?

on our custom fender wells we never do simple brakes
in them.We always wheel them so they have some shape
and they will tie into the top of fender and the core support
and the firewall.The first set we are doing are being built
to clear 22 inch wheels when the truck is layed out.
I would like to here what you guys would pay for some
of these fender wells.If the price is good we will produce
these for you guys.
Justin
www.scottshotrods.com

stunna · 12-22-2008, 01:36 PM

Quote:

Originally Posted by Scottshotrods

on our custom fender wells we never do simple brakes
in them.We always wheel them so they have some shape
and they will tie into the top of fender and the core support
and the firewall.The first set we are doing are being built
to clear 22 inch wheels when the truck is layed out.
I would like to here what you guys would pay for some
of these fender wells.If the price is good we will produce
these for you guys. .
Justin
www.scottshotrods.com

its hard for me to come up with a price because i don't have nuthin to compare them to. This is custom stuff.

Scottshotrods · 12-22-2008, 02:13 PM

Quote:

Originally Posted by stunna

its hard for me to come up with a price because i don't have nuthin to compare them to. This is custom stuff.

with that being said,how bad do you want a set put a price up here so we
can see if we are even on the same page.We have a idea where we will
be at but I will not put the price on here yet.We will once we see where
everybody mind is.
Justin

m6z · 12-22-2008, 02:28 PM

I would also be interested in the inner fenders. As far as price, it would depend on what they looked like and how they attached. $400-$600? I'd be willing to pay around that, maybe more.

gringoloco · 12-22-2008, 02:31 PM

I'll WAG $5-600, but without pics, it's hard to say...

VA72C10 · 12-22-2008, 03:48 PM

Maybe those who have done the fender mods with trailer fenders could chime in with how much they think it's worth time and materials....but I agree...pictures would help determine a value

Also, on the cowls, I was planning on fabricating one for myself and was going to make some to sell on here as well. I was thinking around the $400-450 range shipped with options for wipers/no wipers. How are you handling them...only with wipers, smooth only? And can you prouduce them and ship for $400 w/ the patches being 179? I know there is a ton of labor involved and have seen it quoted at $600 by a couple of guys

Scottshotrods · 12-23-2008, 12:14 AM

we will be posting some pictures of our inner fenderwells when we have them finished.We will then post the price we are going to be selling them for you.
I will say one thing is they
will be more than $500.00
a set.When we post them you guys can be the judge on them.

For the wheel tubs we will post them this week and have a price with them.

For smooth cowl panels we can do them with wipers or
all smooth with no wipers.
The price on these will be between $500-$600 PLUS
UPS.These cowl panels will be 100% metal finish.For all of you guys to know we have had over 100 calls since it came out in the magazine.The people we have been talking to on the
phone.They feel the price is
good for what they are getting.With that being said
we have 17 of them sold now.We are doing 25 of them now at the shop.
Justin
www.scottshotrods.com

stunna · 12-23-2008, 01:14 AM

Quote:

Originally Posted by Scottshotrods

we will be posting some pictures of our inner fenderwells when we have them finished.We will then post the price we are going to be selling them for you.
I will say one thing is they
will be more than $500.00
a set.When we post them you guys can be the judge on them.

For the wheel tubs we will post them this week and have a price with them.

For smooth cowl panels we can do them with wipers or
all smooth with no wipers.
The price on these will be between $500-$600 PLUS
UPS.These cowl panels will be 100% metal finish.For all of you guys to know we have had over 100 calls since it came out in the magazine.The people we have been talking to on the
phone.They feel the price is
good for what they are getting.With that being said
we have 17 of them sold now.We are doing 25 of them now at the shop.
Justin
www.scottshotrods.com

i can't wait to see those inner fenders! I will probably pass on the cowl, I have to choose between the 2 so i choose the fenders ( if i can afford them).

m6z · 02-21-2009, 07:36 PM

Quote:

Originally Posted by Scottshotrods

we will be posting some pictures of our inner fenderwells when we have them finished.We will then post the price we are going to be selling them for you.
I will say one thing is they
will be more than $500.00
a set.When we post them you guys can be the judge on them.

For the wheel tubs we will post them this week and have a price with them.

For smooth cowl panels we can do them with wipers or
all smooth with no wipers.
The price on these will be between $500-$600 PLUS
UPS.These cowl panels will be 100% metal finish.For all of you guys to know we have had over 100 calls since it came out in the magazine.The people we have been talking to on the
phone.They feel the price is
good for what they are getting.With that being said
we have 17 of them sold now.We are doing 25 of them now at the shop.
Justin
www.scottshotrods.com

Did the inner fenderwells die or have they been put on hold? I'd really like to see them.

Scottshotrods · 02-22-2009, 01:17 AM

sorry for the delay on the
inner fender wells.We have
been working on them.We
are almost done with them.
We will post them when they are ready.We been busy on other products at
the shop.
Justin
www.scottshotros.com

Tagg33 · 03-05-2009, 11:03 AM

For those interested in the cowl mod in Sport Truck Magazine, here is the link.
http://www.sporttruck.com/techarticl...owl/index.html

SierraMtns · 02-07-2017, 02:56 PM

It looks like this is Mike Finnegan's C10

https://www.youtube.com/watch?v=cy-7EDKbYiE

**Boog** · 02-07-2017, 04:31 PM

It is.

big_al_71 · 02-07-2017, 04:48 PM

Great parts as usual from scotts hot rods

12-20-2008, 07:32 PM	#77
sddwtcb Guest Posts: n/a	Re: Scotts 67-72 firewall mark me down for a set of inner fenders! that'll cut down some fab time for me!!

12-22-2008, 02:28 PM	#83
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Scotts 67-72 firewall I would also be interested in the inner fenders. As far as price, it would depend on what they looked like and how they attached. $400-$600? I'd be willing to pay around that, maybe more.

12-22-2008, 02:31 PM	#84
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Scotts 67-72 firewall I'll WAG $5-600, but without pics, it's hard to say... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-22-2008, 03:48 PM	#85
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Scotts 67-72 firewall Maybe those who have done the fender mods with trailer fenders could chime in with how much they think it's worth time and materials....but I agree...pictures would help determine a value Also, on the cowls, I was planning on fabricating one for myself and was going to make some to sell on here as well. I was thinking around the $400-450 range shipped with options for wipers/no wipers. How are you handling them...only with wipers, smooth only? And can you prouduce them and ship for $400 w/ the patches being 179? I know there is a ton of labor involved and have seen it quoted at $600 by a couple of guys __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-23-2008, 12:14 AM	#86
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scotts 67-72 firewall we will be posting some pictures of our inner fenderwells when we have them finished.We will then post the price we are going to be selling them for you. I will say one thing is they will be more than $500.00 a set.When we post them you guys can be the judge on them. For the wheel tubs we will post them this week and have a price with them. For smooth cowl panels we can do them with wipers or all smooth with no wipers. The price on these will be between $500-$600 PLUS UPS.These cowl panels will be 100% metal finish.For all of you guys to know we have had over 100 calls since it came out in the magazine.The people we have been talking to on the phone.They feel the price is good for what they are getting.With that being said we have 17 of them sold now.We are doing 25 of them now at the shop. Justin www.scottshotrods.com

02-22-2009, 01:17 AM	#89
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scotts 67-72 firewall sorry for the delay on the inner fender wells.We have been working on them.We are almost done with them. We will post them when they are ready.We been busy on other products at the shop. Justin www.scottshotros.com

03-05-2009, 11:03 AM	#90
Tagg33 Registered User Join Date: Mar 2007 Location: Denver, CO Posts: 247	Re: Scotts 67-72 firewall For those interested in the cowl mod in Sport Truck Magazine, here is the link. http://www.sporttruck.com/techarticl...owl/index.html __________________ Ryan 84 SWB, C4 IFS Crossmember, C4 IRS, RE7 bags, WCC 3pc 22"s My reBuild: http://67-72chevytrucks.com/vboard/s...d.php?t=346328

02-07-2017, 02:56 PM	#91
SierraMtns Registered User Join Date: Jun 2014 Location: Shingle Springs, CA Posts: 869	Re: Scotts 67-72 firewall It looks like this is Mike Finnegan's C10 https://www.youtube.com/watch?v=cy-7EDKbYiE

02-07-2017, 04:31 PM	#92
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: Scotts 67-72 firewall It is. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-07-2017, 04:48 PM	#93
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Scotts 67-72 firewall Great parts as usual from scotts hot rods __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.