Protrash Re-hash - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

protrash64 · 07-11-2009, 11:57 PM

Ok guys, another minor update. First up: at least it wasn't hot today when I decided to go work on the truck........

protrash64 · 07-12-2009, 12:11 AM

If you cant tell......its 110*. I also wanted to put out some general info that I discovered today. I bought power window regulators a couple years ago and I finally decided to scope 'em out. Looks cool and not too difficult at all....but here's what I found. I have the Electric Life kit for 64-66. You must drill to mount the motor assembly and it leaves 3 screws exposed thru the door!!!!. 2 will fall in the lower portion of the door and 1 falls in between the raised area and the door panel. I dont care that much, but I could see some people being very upset with it.

Decided to knock out the front clip with the 'bodymans palm pilot'

...used some 180 and went to town. My front clip is in good shape and will take the least amount of work so I just decided to hit it and quit! Need to do the corners, edges and small work but it was nice to get the majority knocked down in about 2 hours. I'm trying to keep up with shortbed 70

...not really. Put in some more effort on the doors and will be repairing the drivers door soon.

Also got to use the round Durablock as Alan suggested in the 'indent' of the door and it worked nicely. I'll probably go back over that area of the bed before primer gets stuck. Enjoy. (Notice my Craigslist find= 36'' Maxx Air fan)

joe231 · 07-12-2009, 12:29 AM

cool man, glad you seem to be having a cold front hanging around

that fan is a nice find

kyle4381 · 07-12-2009, 12:32 AM

You were outside today? You survived?

Looking good. I will come by and check out the progress. Maybe roast the new Michelins...

protrash64 · 07-12-2009, 12:46 AM

Quote:

Originally Posted by kyle4381

You were outside today? You survived?

Looking good. I will come by and check out the progress. Maybe roast the new Michelins...

Cool.......just do it in 4wd this time...you wont have to rotate the tires as much

.

**scotts62** · 07-12-2009, 12:45 PM

jgh64pkup · 07-12-2009, 01:42 PM

what kinda temps do you have at night in AZ

spr85gmc · 08-01-2009, 12:57 AM

Alots of good info in here how'd I miss this.

**ChiefRocka** · 08-01-2009, 09:26 AM

Quote:

Originally Posted by protrash64

...at least it wasn't hot today........

Quote:

Originally Posted by protrash64

......If you cant tell......its 110....

ya right....thats funny !!!

shortbed70 · 08-04-2009, 10:35 PM

Yours is looking good man at least you have all your sheetmetal...

shrunken66stroker · 08-14-2009, 12:00 AM

What's up with the re-hash. Too hot to work or what?

protrash64 · 08-14-2009, 06:48 PM

Quote:

Originally Posted by shrunken66stroker

What's up with the re-hash. Too hot to work or what?

Thanx for the inquiry....you're pretty much right on. I was laid off for nearly 6 mos and that is when I started the work out of boredom as I stated in the beginning. It was kinda a reverse psychology type thing; I knew if I started doing something that I really wanted to do, I would get a job......and sure as sh!t I got a job. I work for a solar electric company installing grid-tied photovoltaic systems. We start at 4:30am and its HOT

....sometimes I cant even eat dinner Ive been cooked so bad during the day. I dont have a lot of energy left for the truck lately. This is the worst couple of months in the Valley IMO and I probably wont resume anything major until temps moderate a bit. I have some neat stuff and changes coming up and I will post up when I get going on them.

Hope everybody else keeps on truckin' before winter; I'm waiting for winter to get something done.

shortbed70 · 08-15-2009, 02:18 PM

Well congrats on the new job and I understand about the heat thats why I haven't done anything with mine in two weeks but today I got board and primed the whole cab hopefully for the last time.

Strodder · 08-17-2009, 07:36 PM

Subscribed. Have to catch up now.

**scotts62** · 08-17-2009, 09:32 PM

but looks like we have to wait until winter to see any pics

Oh yeah and congrats on the new job

hAetWagon · 08-18-2009, 04:04 PM

The truck looks good. That palm sander may get you into trouble for body work though...lol

protrash64 · 08-18-2009, 05:19 PM

Quote:

Originally Posted by daverod

Ya jobs kinda suck,but they do give you money to buy cool stuff for your truck.

.....Yep, time to stimulate the economy!!!

Quote:

Originally Posted by hAetWagon

The truck looks good. That palm sander may get you into trouble for body work though...lol

A palm sander is not recommended for body work as it leaves little circles everywhere;

I used 180g paper just to knock the high build down and I will be covering it in another layer of high build. I know its not good but its the only power tool I have for sanding, not enough air capacity for a line sander at my house. It did a good job for what I needed done as I kept it moving and there is not any serious stuff to do on the front clip. If I spray on the primer as thick as the last batch, nothing will ever be seen

.

daverod · 08-18-2009, 05:30 PM

Here's what I use. It's orbital. Don't cost to much.

Dinos63 · 08-18-2009, 06:00 PM

JEFF I KNOW HOW YA FEEL, IT JUST NO FUN TO WORK ON STUFF WHEN YOU ARE BAKING

MacAttack · 08-19-2009, 09:24 AM

It may hit 78 here today.

jchav62 · 08-18-2009, 06:24 PM

I was born and raised in Henderson, NV, just outside of Las Vegas, not much cooler than Phoenix. I built my '62 there, mostly in the summer of 2001. Almost died a few times it was sooo hot. I was an impatient SOB. Then I moved here to NM, got an office job...really softened me up. If it's above 90 degrees, I can hardly hang... I have to stay inside by the fan..

MacAttack · 08-19-2009, 01:43 PM

Quote:

Originally Posted by jchav62

I was born and raised in Henderson, NV, just outside of Las Vegas, not much cooler than Phoenix.

Henderson, isn't that where the Pacific Engineering Production Company used to be?

Mac.

jchav62 · 08-19-2009, 03:38 PM

Quote:

Originally Posted by MacAttack

Henderson, isn't that where the Pacific Engineering Production Company used to be?

Mac.

Yeah...don't bring that blast up. I was 13 years old and it ruined me... I haven't slept right since... j/k

May 4, 1988... I was in the pizza line at lunch at Brown Junior High School... I remember it well. My Dad actually worked about a mile away at a lime plant when the blast happened. Scary stuff for a youngan...

shrunken66stroker · 08-19-2009, 08:58 PM

Quote:

Originally Posted by jchav62

Yeah...don't bring that blast up. I was 13 years old and it ruined me... I haven't slept right since... j/k

May 4, 1988... I was in the pizza line at lunch at Brown Junior High School... I remember it well. My Dad actually worked about a mile away at a lime plant when the blast happened. Scary stuff for a youngan...

I was just across town Joe. We evacuated and when we got outside we saw that mushroom cloud. I was sure the Russians had just bombed Vegas and we were done for. Too much cold war, Russian, Commie talk from my Grandpa during my childhood I guess.

ruffrida2005 · 08-19-2009, 09:02 PM

Quote:

Originally Posted by shrunken66stroker

I was just across town Joe. We evacuated and when we got outside we saw that mushroom cloud. I was sure the Russians had just bombed Vegas and we were done for. Too much cold war, Russian, Commie talk from my Grandpa during my childhood I guess.

I think someone watched Red Dawn too many times!!

07-11-2009, 11:57 PM	#1
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Protrash Re-hash Ok guys, another minor update. First up: at least it wasn't hot today when I decided to go work on the truck........ Attached Images __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-12-2009, 12:11 AM	#2
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Protrash Re-hash If you cant tell......its 110. I also wanted to put out some general info that I discovered today. I bought power window regulators a couple years ago and I finally decided to scope 'em out. Looks cool and not too difficult at all....but here's what I found. I have the Electric Life kit for 64-66. You must drill to mount the motor assembly and it leaves 3 screws exposed thru the door!!!!. 2 will fall in the lower portion of the door and 1 falls in between the raised area and the door panel. I dont care that much, but I could see some people being very upset with it. Decided to knock out the front clip with the 'bodymans palm pilot'...used some 180 and went to town. My front clip is in good shape and will take the least amount of work so I just decided to hit it and quit! Need to do the corners, edges and small work but it was nice to get the majority knocked down in about 2 hours. I'm trying to keep up with shortbed 70...not really. Put in some more effort on the doors and will be repairing the drivers door soon. Also got to use the round Durablock as Alan suggested in the 'indent' of the door and it worked nicely. I'll probably go back over that area of the bed before primer gets stuck. Enjoy. (Notice my Craigslist find= 36'' Maxx Air fan) Attached Images __________________ 64 CHEVY PICK-UP* > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-12-2009, 12:29 AM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Protrash Re-hash cool man, glad you seem to be having a cold front hanging around that fan is a nice find __________________ *CHEVY ONLY*

07-12-2009, 12:32 AM	#4
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: Protrash Re-hash You were outside today? You survived? Looking good. I will come by and check out the progress. Maybe roast the new Michelins...

07-12-2009, 12:45 PM	#6
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Protrash Re-hash __________________ Scott 93 crew cab build Project 62

07-12-2009, 01:42 PM	#7
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Protrash Re-hash what kinda temps do you have at night in AZ __________________ Gage 1967 C10 Shortbed Stepside

08-01-2009, 12:57 AM	#8
spr85gmc Registered User Join Date: Jul 2007 Location: san antonio Posts: 648	Re: Protrash Re-hash Alots of good info in here how'd I miss this.

08-04-2009, 10:35 PM	#10
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Protrash Re-hash Yours is looking good man at least you have all your sheetmetal... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-14-2009, 12:00 AM	#11
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Protrash Re-hash What's up with the re-hash. Too hot to work or what? __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

08-15-2009, 02:18 PM	#13
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Protrash Re-hash Well congrats on the new job and I understand about the heat thats why I haven't done anything with mine in two weeks but today I got board and primed the whole cab hopefully for the last time. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-17-2009, 07:36 PM	#14
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Protrash Re-hash Subscribed. Have to catch up now. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-17-2009, 09:32 PM	#15
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Protrash Re-hash but looks like we have to wait until winter to see any pics Oh yeah and congrats on the new job __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 08-17-2009 at 09:33 PM. Reason: Had to congradulate a home fri

08-18-2009, 04:04 PM	#16
hAetWagon Schlongbed MEMBER (heh)#15 Join Date: Jun 2005 Location: Sacramento Posts: 232	Re: Protrash Re-hash The truck looks good. That palm sander may get you into trouble for body work though...lol __________________ 82 Chevy Blazer 4wd.RIP 1965 Chevy C10,350V8 Get it reliable,then puttin' it in the weeds.. "Old truck, all new headaches."

08-18-2009, 05:30 PM	#18
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Protrash Re-hash Here's what I use. It's orbital. Don't cost to much. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-18-2009 at 05:30 PM.

08-18-2009, 06:00 PM	#19
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Protrash Re-hash JEFF I KNOW HOW YA FEEL, IT JUST NO FUN TO WORK ON STUFF WHEN YOU ARE BAKING __________________ CHEVY ONLY... Nothin Else !



Register or Log In To remove these advertisements.

08-19-2009, 09:24 AM	#20
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Protrash Re-hash It may hit 78 here today. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

08-18-2009, 06:24 PM	#21
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Protrash Re-hash I was born and raised in Henderson, NV, just outside of Las Vegas, not much cooler than Phoenix. I built my '62 there, mostly in the summer of 2001. Almost died a few times it was sooo hot. I was an impatient SOB. Then I moved here to NM, got an office job...really softened me up. If it's above 90 degrees, I can hardly hang... I have to stay inside by the fan.. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 08-18-2009 at 06:25 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.