2" Drop Trailing arms - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lowdownstar · 08-29-2009, 01:05 PM

Sorry Nate I didn't mean to talk about your BALLS in public

Hey Nathan how will these trailing arms work with my setup? Would i be able to get rid of the lowering blocks? I also need some rear shocks from you and some air fittings. I'll call you some time next week. Any time better then another?

Thanks Ray

PBFAB.COM · 08-29-2009, 01:15 PM

Quote:

Originally Posted by SCOTI

Sweet. I've been looking for alternatives on the PHB bushings this week. Any you recommend off the top of your head?

Yes, just switch to the fully adjustable pan-hard bar I will making!

SCOTI · 08-29-2009, 01:18 PM

Quote:

Originally Posted by porterbuilt

Yes, just switch to the fully adjustable pan-hard bar I will making!

Put it in the box w/my arms for field testing & consider it done

. Seriously.... We discussed some opportunities so if you're ready, give me a shout.

SCOTTMO · 08-29-2009, 02:07 PM

Quote:

Originally Posted by lowdownstar

these are what i am talking about. I am not trying to say anything bad about Nathans welding at all, as a matter fax i think hes better than a robot! This is normal stuff, i just didn't like them after PC was done> i thought i would save you from going threw it. Maybe i am just to picky. That is why i went with Porter built stuff in the first place, i am picky. Sorry if i had hurt anyones feelings, not my intent.

Ray

As a powdercoater if i get a customer that brings me a part that looks real bad [lots of slag] I telll them i can clean this up or leave it,it only takes a minute or two to hit it with a 3m disc.

lowdownstar · 08-29-2009, 02:29 PM

My PC just forget to tell the young kid to clean them up before they coated them. I forgot i didn't do them till i got to the PC shop. I like to clean everything up before a paint, coat, or polish anything! I am taking my time to even polish the shafts for the A-arms as well as all the bolts. It's just me.
That is why they call it a sickness, and I am one sick SOB!

Ray

SCOTTMO · 08-29-2009, 04:33 PM

Attension to detail and alittle extra effort makes the whole job that much better and noticed in the positive way

LUV2XCLR8 · 08-29-2009, 04:47 PM

I'm building mine to drive, so road rash and some character is a welcome
addition to my ride

(I can hear people gasping through my monitor)

5150 · 08-29-2009, 05:55 PM

Quote:

You just now getting yours? I had a set last week.

Oh, did I say that out loud....

__________________

Ken, what are you putting your set on?

**67cheby** · 09-01-2009, 12:48 PM

i am sure someone else has asked but, what is that in porterbuilts avatar ??

**67cheby** · 09-01-2009, 12:50 PM

i clicked on it now i see , its a freakin awesome weld. WOW

joe231 · 09-01-2009, 02:10 PM

so....any plans to adapt this set up to the 73-up frame?

I have been kicking around the idea of swapping a '72-earlier trailing arm suspension into my '80....

Frizzle Fry · 09-01-2009, 03:08 PM

Quote:

Originally Posted by 67cheby

i am sure someone else has asked but, what is that in porterbuilts avatar ??

Quote:

Originally Posted by 67cheby

i clicked on it now i see , its a freakin awesome weld. WOW

Those are the PB line of tig'ed paper weights. I've got one

There's another company working on a knock-off already, but Nate is ahead of the game with v2.3 almost ready for launch

LUV2XCLR8 · 09-01-2009, 05:01 PM

Got the cross member in, going to put the rear springs on
and then soon as the u-bolts get here she will be rolling!

LUV2XCLR8 · 09-07-2009, 09:52 PM

Psssst, Hey Nate, the Holiday is over

PBFAB.COM · 09-08-2009, 01:18 AM

Quote:

Originally Posted by LUV2XCLR8

Psssst, Hey Nate, the Holiday is over

I guess the holiday really delayed the shipping. PM sent with tracking info.

stunna · 09-08-2009, 02:15 PM

Quote:

Originally Posted by porterbuilt

I guess the holiday really delayed the shipping. PM sent with tracking info.

what about me nate? james?

PBFAB.COM · 09-08-2009, 02:24 PM

Quote:

Originally Posted by stunna

what about me nate? james?

Just sent you an e-mail. You will be the first with the complete rear kit package!

LUV2XCLR8 · 09-08-2009, 02:30 PM

Quote:

Originally Posted by porterbuilt

I guess the holiday really delayed the shipping. PM sent with tracking info.

Got your PM

stunna · 09-09-2009, 10:45 PM

Quote:

Originally Posted by porterbuilt

Just sent you an e-mail. You will be the first with the complete rear kit package!

You rock man

**N2TRUX** · 09-09-2009, 11:17 PM

Quote:

Originally Posted by 5150

Ken, what are you putting your set on?

Nothing.....yet...

Actually I was just messing with Craig and Scoti. I know they have been waiting eagerly and it seemed like a good opportunity to give them a poke in the ribs. Unfortunately they didn't fall for it.....

**67cheby** · 09-10-2009, 09:03 AM

I just want to know who will be first for the hood hinges how about MIKE LOSH, come on down you are the next contestant !!!!!

SCOTI · 09-10-2009, 10:08 AM

Quote:

Originally Posted by N2TRUX

Nothing.....yet...

Actually I was just messing with Craig and Scoti. I know they have been waiting eagerly and it seemed like a good opportunity to give them a poke in the ribs. Unfortunately they didn't fall for it.....

I knew better. I'm still waiting but I'll get some pics up once I have them.

stunna · 09-10-2009, 11:05 AM

Quote:

Originally Posted by 67cheby

I just want to know who will be first for the hood hinges how about MIKE LOSH, come on down you are the next contestant !!!!!

i cant wait to see those!!

LUV2XCLR8 · 09-13-2009, 09:10 AM

Lots of Pictures Tuesday

shifty · 09-13-2009, 10:41 PM

I already purchased ECE's extreme drop crossmember, but my trailing arms ... they're just ugly. I like this better, and it saves me from making blocks.

Questions:

- How long till the panhard bar will be released?

- Is there any other option in the meantime (for panhard bar)?

- Any e-brake provisions?

- Will the geometry be much different...I mean to say, if I've laready drilled for my bags using the ECE center crossmember and the stock trailing arms, will I be re-drilling anything because of differences (either the framerail holes or the CPP C-Notch plate where bags mount)?

- Are these powdercoated, are there diff't prices for PC'd versus non-PC'd?

- Do you have any plans for shock relocation to this, or is this a n00b question?

- What is average pay-to-ship time?

I'm trying to get my frame, etc. in for powdercoating by Oct 1st. After looking at my trailing arms this weekend, they're good, but man ... meh. This is nicer and more inline with what I want.

08-29-2009, 01:05 PM	#76
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: 2" Drop Trailing arms Sorry Nate I didn't mean to talk about your BALLS in public Hey Nathan how will these trailing arms work with my setup? Would i be able to get rid of the lowering blocks? I also need some rear shocks from you and some air fittings. I'll call you some time next week. Any time better then another? Thanks Ray

08-29-2009, 02:29 PM	#80
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: 2" Drop Trailing arms My PC just forget to tell the young kid to clean them up before they coated them. I forgot i didn't do them till i got to the PC shop. I like to clean everything up before a paint, coat, or polish anything! I am taking my time to even polish the shafts for the A-arms as well as all the bolts. It's just me. That is why they call it a sickness, and I am one sick SOB! Ray

08-29-2009, 04:33 PM	#81
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: 2" Drop Trailing arms Attension to detail and alittle extra effort makes the whole job that much better and noticed in the positive way

08-29-2009, 04:47 PM	#82
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 2" Drop Trailing arms I'm building mine to drive, so road rash and some character is a welcome addition to my ride (I can hear people gasping through my monitor) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-01-2009, 12:48 PM	#84
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 2" Drop Trailing arms i am sure someone else has asked but, what is that in porterbuilts avatar ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-01-2009, 12:50 PM	#85
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 2" Drop Trailing arms i clicked on it now i see , its a freakin awesome weld. WOW __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-01-2009, 02:10 PM	#86
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 2" Drop Trailing arms so....any plans to adapt this set up to the 73-up frame? I have been kicking around the idea of swapping a '72-earlier trailing arm suspension into my '80.... __________________ *CHEVY ONLY*

09-01-2009, 05:01 PM	#88
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 2" Drop Trailing arms Got the cross member in, going to put the rear springs on and then soon as the u-bolts get here she will be rolling! __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-07-2009, 09:52 PM	#89
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 2" Drop Trailing arms Psssst, Hey Nate, the Holiday is over __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-10-2009, 09:03 AM	#96
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 2" Drop Trailing arms I just want to know who will be first for the hood hinges how about MIKE LOSH, come on down you are the next contestant !!!!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-13-2009, 09:10 AM	#99
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 2" Drop Trailing arms Lots of Pictures Tuesday __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-13-2009, 10:41 PM	#100
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: 2" Drop Trailing arms I already purchased ECE's extreme drop crossmember, but my trailing arms ... they're just ugly. I like this better, and it saves me from making blocks. Questions: - How long till the panhard bar will be released? - Is there any other option in the meantime (for panhard bar)? - Any e-brake provisions? - Will the geometry be much different...I mean to say, if I've laready drilled for my bags using the ECE center crossmember and the stock trailing arms, will I be re-drilling anything because of differences (either the framerail holes or the CPP C-Notch plate where bags mount)? - Are these powdercoated, are there diff't prices for PC'd versus non-PC'd? - Do you have any plans for shock relocation to this, or is this a n00b question? - What is average pay-to-ship time? I'm trying to get my frame, etc. in for powdercoating by Oct 1st. After looking at my trailing arms this weekend, they're good, but man ... meh. This is nicer and more inline with what I want. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.