AR WTB- Coy Wheel center cap spacers - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 05-25-2010, 04:25 PM

Quote:

Originally Posted by fatboys69

you will need to get longer mount screws as well. If I remember correctly I got #10-32 x 5/8 Socket Flat Head screws in Stainless steel.

Steve,
This is from page one. Not 100% sure on the size but it looks like the need to be about a 1/4" longer than the originals.

Zoomin · 05-25-2010, 09:58 PM

Umm, let's see... you used .250" stock, so bring the zero down, carry the 5... yup, that should about do it!

Got them today, they look great. Thanks again Mike & Keith!

mcbassin · 05-26-2010, 08:46 AM

your welcome Steve!

I still haven't heard from a few guys on this list. Let me know if you are still interested in your set. thanks

1)Jackyl9999 shipped
2)Lolife99 (2 sets) - shipped
3)Tim R shipped
4)Zoomin shipped
5)Skeeterbug shipped
6)big al 71
7)svgould shipped
8)Number98
9)bigarmzz
10)gmikkels (2sets) shipped

**lolife99** · 05-26-2010, 09:33 AM

Mike I would send out a PM to each person you haven't heard from.
You also might want to start a "For Sale" thread of your own, since you are a High Octane" vendor for a short period of time.

I'll see if I can find any more material tonight.

svgould · 05-26-2010, 09:58 AM

I sent paypal payment out a few days ago! Let me know if you did not recieve it.

Thanks,

Shane

Quote:

Originally Posted by mcbassin

your welcome Steve!

I still haven't heard from a few guys on this list. Let me know if you are still interested in your set. thanks

1)Jackyl9999 shipped
2)Lolife99 (2 sets) - shipped
3)Tim R shipped
4)Zoomin shipped
5)Skeeterbug shipped
6)big al 71
7)svgould
8)Number98
9)bigarmzz
10)gmikkels (2sets) shipped

mcbassin · 05-26-2010, 10:13 AM

Quote:

Originally Posted by lolife99

Mike I would send out a PM to each person you haven't heard from.
You also might want to start a "For Sale" thread of your own, since you are a High Octane" vendor for a short period of time.

I'll see if I can find any more material tonight.

Great idea, even though I'm not really trying to pimp these things.
Mike

mcbassin · 05-26-2010, 10:13 AM

Quote:

Originally Posted by svgould

I sent paypal payment out a few days ago! Let me know if you did not recieve it.

Thanks,

Shane

Shane,
You are good to go, my bad, you should get yours today.

big_al_71 · 05-26-2010, 10:23 AM

Mike pm sent!!!!

mcbassin · 05-26-2010, 01:24 PM

Updated list 5-26-10
1)Jackyl9999 shipped
2)Lolife99 (2 sets) - shipped
3)Tim R shipped
4)Zoomin shipped
5)Skeeterbug shipped
6)big al 71shipped
7)svgould shipped
8)Number98
9)bigarmzz
10)gmikkels (2sets) shipped
11)m6z

big_al_71 · 05-26-2010, 04:32 PM

Thanks Mike!!!!

svgould · 05-27-2010, 11:34 PM

Quote:

Originally Posted by mcbassin

Shane,
You are good to go, my bad, you should get yours today.

Got them! Haven't installed them yet, but they look good sitting on my desk! thanks again!

mcbassin · 05-28-2010, 12:00 AM

Your welcome guys!

Gonna runs some more next week pending material. Anyone else want a set or two?

**lolife99** · 05-28-2010, 01:13 AM

Mike I should be sending you some more material tomorrow.
Maybe enough for 15 pair of spacers.
I'll let you know for sure tomorrow.

**lolife99** · 05-28-2010, 06:54 AM

Mike,...
I found these on the internet.
These were custom machined for a set of Coys.
I wish you had a way to make these. (without the logo)

Hmmm,... what if I sent you some thicker material?

mcbassin · 05-28-2010, 07:47 AM

Looks like a piece of cake on one of our newer machines. Machining time would be more expensive though. The satin finish looks good too. Probably still need to be annodized or chromed to prevent corrosion.
After looking closer at the photos, I think that those may be made from stainless steel stock.....ouch! that would send the price through the roof!

big_al_71 · 05-28-2010, 10:46 AM

Quote:

Originally Posted by lolife99

Mike,...
I found these on the internet.
These were custom machined for a set of Coys.
I wish you had a way to make these. (without the logo)

Hmmm,... what if I sent you some thicker material?

Quote:

Originally Posted by mcbassin

Looks like a piece of cake on one of our newer machines. Machining time would be more expensive though. The satin finish looks good too. Probably still need to be annodized or chromed to prevent corrosion.
After looking closer at the photos, I think that those may be made from stainless steel stock.....ouch! that would send the price through the roof!

Keith those look great and black coys to boot....

Mike if you consider making some I would also be interested in buying a set would love to have them etched as well. so just in case add me to that list also ...thanks

big_al_71 · 05-28-2010, 04:45 PM

Mike I just received the spacers Thanks again!!!!!

Al

skeeterbug · 05-28-2010, 05:16 PM

got mine earlier this week, thanks again mcbassin

**Hart_Rod** · 05-28-2010, 05:21 PM

Quote:

Originally Posted by lolife99

Mike,...
I found these on the internet.
These were custom machined for a set of Coys.
I wish you had a way to make these. (without the logo)

Hmmm,... what if I sent you some thicker material?

I would be interested in a set of those, especially if you could personalize them a little...

**lolife99** · 05-28-2010, 05:33 PM

Quote:

Originally Posted by Hart_Rod

I would be interested in a set of those, especially if you could personalize them a little...

I think they take the Coys "up a notch".
The problem is finding thick enough 6061 aluminum material.
So if anyone has a source for 4" bar stock,... let me or Mike know.

Number98 · 05-28-2010, 08:25 PM

Quote:

Originally Posted by mcbassin

Your welcome guys!

Gonna runs some more next week pending material. Anyone else want a set or two?

PM sent today....

Tim R · 05-30-2010, 10:14 AM

Got mine spacers in and just wanted to say thanks they look great!!!!!!

Tim

mcbassin · 05-30-2010, 10:22 AM

Quote:

Originally Posted by Hart_Rod

I would be interested in a set of those, especially if you could personalize them a little...

I think if we go that far it will be no problem to "personlize" them a little.

**Hart_Rod** · 05-30-2010, 02:20 PM

Quote:

Originally Posted by mcbassin

I think if we go that far it will be no problem to "personlize" them a little.

Thanks!

Zoomin · 05-30-2010, 10:03 PM

Quote:

Originally Posted by lolife99

Mike I should be sending you some more material tomorrow.
Maybe enough for 15 pair of spacers.
I'll let you know for sure tomorrow.

Would it be possible to get some 1/8" or 3/16"? The 1/4" is a bit thick. I'll buy another set and be the guinea pig for them.

05-25-2010, 09:58 PM	#77
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: WTB- Coy Wheel center cap spacers Umm, let's see... you used .250" stock, so bring the zero down, carry the 5... yup, that should about do it! Got them today, they look great. Thanks again Mike & Keith!

05-26-2010, 08:46 AM	#78
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers your welcome Steve! I still haven't heard from a few guys on this list. Let me know if you are still interested in your set. thanks 1)Jackyl9999 shipped 2)Lolife99 (2 sets) - shipped 3)Tim R shipped 4)Zoomin shipped 5)Skeeterbug shipped 6)big al 71 7)svgould shipped 8)Number98 9)bigarmzz 10)gmikkels (2sets) shipped __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 05-26-2010 at 10:14 AM.

05-26-2010, 09:33 AM	#79
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: WTB- Coy Wheel center cap spacers Mike I would send out a PM to each person you haven't heard from. You also might want to start a "For Sale" thread of your own, since you are a High Octane" vendor for a short period of time. I'll see if I can find any more material tonight. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

05-26-2010, 10:23 AM	#83
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WTB- Coy Wheel center cap spacers Mike pm sent!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-26-2010, 01:24 PM	#84
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers Updated list 5-26-10 1)Jackyl9999 shipped 2)Lolife99 (2 sets) - shipped 3)Tim R shipped 4)Zoomin shipped 5)Skeeterbug shipped 6)big al 71shipped 7)svgould shipped 8)Number98 9)bigarmzz 10)gmikkels (2sets) shipped 11)m6z __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-26-2010, 04:32 PM	#85
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WTB- Coy Wheel center cap spacers Thanks Mike!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-28-2010, 12:00 AM	#87
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers Your welcome guys! Gonna runs some more next week pending material. Anyone else want a set or two? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 05-28-2010 at 12:01 AM.

05-28-2010, 01:13 AM	#88
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: WTB- Coy Wheel center cap spacers Mike I should be sending you some more material tomorrow. Maybe enough for 15 pair of spacers. I'll let you know for sure tomorrow. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

05-28-2010, 06:54 AM	#89
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: WTB- Coy Wheel center cap spacers Mike,... I found these on the internet. These were custom machined for a set of Coys. I wish you had a way to make these. (without the logo) Hmmm,... what if I sent you some thicker material? Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 05-28-2010 at 06:55 AM.

05-28-2010, 07:47 AM	#90
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB- Coy Wheel center cap spacers Looks like a piece of cake on one of our newer machines. Machining time would be more expensive though. The satin finish looks good too. Probably still need to be annodized or chromed to prevent corrosion. After looking closer at the photos, I think that those may be made from stainless steel stock.....ouch! that would send the price through the roof! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 05-28-2010 at 08:37 AM. Reason: looked closer at the pics

05-28-2010, 04:45 PM	#92
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: WTB- Coy Wheel center cap spacers Mike I just received the spacers Thanks again!!!!! Al __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-28-2010, 05:16 PM	#93
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: WTB- Coy Wheel center cap spacers got mine earlier this week, thanks again mcbassin __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

05-30-2010, 10:14 AM	#97
Tim R Registered User Join Date: Jan 2009 Location: bmt,tx Posts: 127	Re: WTB- Coy Wheel center cap spacers Got mine spacers in and just wanted to say thanks they look great!!!!!! Tim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.