GA 72 cheyenne super parting - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 10-15-2011, 08:52 PM

kelly`s out on everything.

heavymetalchevy- your up on the heater control. add $10.95 for shipping if your still interested.

ttt for the rest

jessewebb · 10-15-2011, 09:07 PM

you still have all the a\c stuff?

**southern parts** · 10-15-2011, 09:40 PM

yes i do

*SILVER_WS6* · 10-15-2011, 09:51 PM

......

99-LS1-SS · 10-15-2011, 09:53 PM

southern parts, you have a PM.

HeavyMetalChevy · 10-16-2011, 12:40 AM

Quote:

Originally Posted by southern parts

kelly`s out on everything.

heavymetalchevy- your up on the heater control. add $10.95 for shipping if your still interested.

ttt for the rest

remimartin257@aol.com please refresh me....30 +ship???

ortegamotor · 10-16-2011, 09:55 AM

is the dash pad still available ? and if so , what is the condition and price? Tony

**southern parts** · 10-16-2011, 11:02 AM

A/C pics for jessewebb & 99-ls1-ss. a/c control with cables, all levers good, diverter is good but top piece to supply center vent has been glued to it , all 3 vents in good condition, S duct is cracked, i`m sure the heater core needs replaced, outer box housing in good condition, has a little rust on the bottom where it mounts to the firewall.

orange cab pics- a/c control has 1 lever broke, diverter and s duct condition unknown, driver side vent ?

not going to separate.

**southern parts** · 10-16-2011, 11:04 AM

ortegamotor- sorry the dash pad is cracked.

ortegamotor · 10-16-2011, 05:08 PM

Quote:

Originally Posted by southern parts

ortegamotor- sorry the dash pad is cracked.

cool , thanks for getting back to me. Good luck with the rest of your sale. Tony

**WIDESIDE72** · 10-16-2011, 05:12 PM

I didn't get the notification that you posted photos. Sorry to take so long to reply. All of them look good. I just don't know which one is right for the swap and small balancer. (It had a lwp nd large balancer when I bought it.)

I also need the two phillip head screws that hold the trim cover under the column on, as well as the ignition trim bezel if it is in good shape, and the rear axle brake lines if they aren't bent up or rusted.

McNugget · 10-16-2011, 05:23 PM

could you post a short list of what has sold?
I am interested in parts, but I don't wanna bug you about stuff you've already sold. And if no one has claimed the door panels I'd like them and I would part with the wood grain inserts as I see several people are wanting just those and I don't like the wood grain.

**southern parts** · 10-16-2011, 05:40 PM

wideside72- your balancer should be the same, long or short waterpump. do you have a pic of the front of your engine?

mcnugget- doorpanels are still available, $100 plus shipping

the only things sold are glove box door, vent and side windows, misc cables.

projectjimmie68 · 10-16-2011, 06:43 PM

Is thr radio still available with the bracket ? If so how much including shipping to zip 32136? Thanks

**WIDESIDE72** · 10-16-2011, 07:38 PM

Quote:

Originally Posted by southern parts

wideside72- your balancer should be the same, long or short waterpump. do you have a pic of the front of your engine?.

Actually, the balancers for LWP and SWP are different. LWP has the 8" balancer, which is too large for the SWP to fit because it is closer to the engine. I know because I had to buy a new 6 1/2" balancer when I went from LWP to SWP in order to get the WP to fit. I have the timing tab from the LWP set up, it is too far from the smaller balancer and I blieve the timing mark is different.

**southern parts** · 10-16-2011, 09:13 PM

my hollander shows the same balancer #6272222 from 70-76 on trucks. 73 up would be a long waterpump. here`s a pic of the engine i just pulled from this truck. 8" balancer swp.

**WIDESIDE72** · 10-17-2011, 12:23 AM

Quote:

Originally Posted by southern parts

my hollander shows the same balancer #6272222 from 70-76 on trucks. 73 up would be a long waterpump. here`s a pic of the engine i just pulled from this truck. 8" balancer swp.

All I can say is the 350 had an 8" balancer and a LWP. I pulled the LWP and tried to install a SWP I bought from NAPA for a 72 350 and it would not mate to the block, the balancer was too big, so I went back to NAPA and told them I needed a balancer for a 72 350 and he brought me the 6- 1/2" balancer.

I guess what I need to know from you is, do you have a timing tab from an engine with a 6 1/2" balancer?

**southern parts** · 10-22-2011, 12:16 PM

ttt

**southern parts** · 10-27-2011, 09:45 PM

one more time ttt

Becker67 · 11-01-2011, 09:51 PM

Do you still have the blue a/c vents still?

REEDS 72 · 11-02-2011, 06:37 PM

Hi looking for a good set of rear wheel tubs dings&scratchs not a big deal just need to have good flanges thanks.

**southern parts** · 11-02-2011, 07:02 PM

becker67- going to keep everything together for now. i may have some others. It will be a couple days before i can check.

reeds 72- the tubs in this truck have some pitting but are still solid. $75 plus shipping. i`ll get pics in a couple days if your interested

Becker67 · 11-02-2011, 07:06 PM

Quote:

Originally Posted by southern parts

becker67- going to keep everything together for now. i may have some others. It will be a couple days before i can check.

reeds 72- the tubs in this truck have some pitting but are still solid. $75 plus shipping. i`ll get pics in a couple days if your interested

Let me know what you find im looking for a set of the blue ones like that.

REEDS 72 · 11-02-2011, 07:09 PM

Yes i am interested just need the flanges to be good can work with rest all wait for some pics thanks for your time reed

Number98 · 11-02-2011, 09:43 PM

What kind of shape is the lower black/chrome trim in? What do you need for it or do you have any decent "driver condition" pieces laying around?

10-15-2011, 08:52 PM	#76
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting kelly`s out on everything. heavymetalchevy- your up on the heater control. add $10.95 for shipping if your still interested. ttt for the rest

10-15-2011, 09:07 PM	#77
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 72 cheyenne super parting you still have all the a\c stuff? __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

10-15-2011, 09:40 PM	#78
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting yes i do

10-15-2011, 09:51 PM	#79
SILVER_WS6 Account Suspended Join Date: May 2011 Location: 67-72 HQ Posts: 103	Re: 72 cheyenne super parting ......

10-15-2011, 09:53 PM	#80
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: 72 cheyenne super parting southern parts, you have a PM.

10-16-2011, 09:55 AM	#82
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: 72 cheyenne super parting is the dash pad still available ? and if so , what is the condition and price? Tony

10-16-2011, 11:02 AM	#83
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting A/C pics for jessewebb & 99-ls1-ss. a/c control with cables, all levers good, diverter is good but top piece to supply center vent has been glued to it , all 3 vents in good condition, S duct is cracked, i`m sure the heater core needs replaced, outer box housing in good condition, has a little rust on the bottom where it mounts to the firewall. orange cab pics- a/c control has 1 lever broke, diverter and s duct condition unknown, driver side vent ? not going to separate. Attached Images

10-16-2011, 11:04 AM	#84
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting ortegamotor- sorry the dash pad is cracked.

10-16-2011, 05:12 PM	#86
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 cheyenne super parting I didn't get the notification that you posted photos. Sorry to take so long to reply. All of them look good. I just don't know which one is right for the swap and small balancer. (It had a lwp nd large balancer when I bought it.) I also need the two phillip head screws that hold the trim cover under the column on, as well as the ignition trim bezel if it is in good shape, and the rear axle brake lines if they aren't bent up or rusted.

10-16-2011, 05:23 PM	#87
McNugget Registered User Join Date: Mar 2011 Location: Springfield, MO Posts: 42	Re: 72 cheyenne super parting could you post a short list of what has sold? I am interested in parts, but I don't wanna bug you about stuff you've already sold. And if no one has claimed the door panels I'd like them and I would part with the wood grain inserts as I see several people are wanting just those and I don't like the wood grain. __________________ 1971 Chevy Cheyenne 1972 Chevy Cheyenne 4x4

10-16-2011, 05:40 PM	#88
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting wideside72- your balancer should be the same, long or short waterpump. do you have a pic of the front of your engine? mcnugget- doorpanels are still available, $100 plus shipping the only things sold are glove box door, vent and side windows, misc cables.

10-16-2011, 06:43 PM	#89
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 72 cheyenne super parting Is thr radio still available with the bracket ? If so how much including shipping to zip 32136? Thanks

10-16-2011, 09:13 PM	#91
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting my hollander shows the same balancer #6272222 from 70-76 on trucks. 73 up would be a long waterpump. here`s a pic of the engine i just pulled from this truck. 8" balancer swp. Attached Images

10-22-2011, 12:16 PM	#93
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting ttt

10-27-2011, 09:45 PM	#94
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting one more time ttt



Register or Log In To remove these advertisements.

11-01-2011, 09:51 PM	#95
Becker67 Registered User Join Date: Jan 2009 Location: Pueblo West, Colorado Posts: 265	Re: 72 cheyenne super parting Do you still have the blue a/c vents still? __________________ Kevin 67 custom cab big window swb 350/700r4 4/6 drop tilt,a/c 69 custom/10 swb 350/350 4/6 drop tach,tilt 71 cheyenne super swb 454/700r4 4/6drop tach,tilt,a/c,bucket seats,speed warning 96 gmc swb

11-02-2011, 06:37 PM	#96
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 72 cheyenne super parting Hi looking for a good set of rear wheel tubs dings&scratchs not a big deal just need to have good flanges thanks.

11-02-2011, 07:02 PM	#97
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: 72 cheyenne super parting becker67- going to keep everything together for now. i may have some others. It will be a couple days before i can check. reeds 72- the tubs in this truck have some pitting but are still solid. $75 plus shipping. i`ll get pics in a couple days if your interested

11-02-2011, 07:09 PM	#99
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 72 cheyenne super parting Yes i am interested just need the flanges to be good can work with rest all wait for some pics thanks for your time reed

11-02-2011, 09:43 PM	#100
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: 72 cheyenne super parting What kind of shape is the lower black/chrome trim in? What do you need for it or do you have any decent "driver condition" pieces laying around?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.