My brides new ride - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

duallyjams · 12-23-2012, 12:57 PM

Quote:

Originally Posted by jb1016

Added a tach as well, nice work!

the tach is a repro

Quote:

Originally Posted by Bomp

Looks fantastic.
Posted via Mobile Device

thanks I wish I had you welding skils

Quote:

Originally Posted by Captainfab

Looks great

Did you paint the bezel or is it just bead blasted?

It's painted , I went through three different colors of silver , still not sure if I like the color.

61_FL_Apache · 12-23-2012, 11:30 PM

The new cluster looks great!

hemifalcon · 12-24-2012, 03:22 AM

Hey.. where did you get that tool for the vent window rivets??

duallyjams · 12-24-2012, 10:12 AM

Quote:

Originally Posted by 61_FL_Apache

The new cluster looks great!

thanks

Quote:

Originally Posted by hemifalcon

Hey.. where did you get that tool for the vent window rivets??

bought it from another board member it was kinda pricey not sure if I had to do it over again if I would buy one , look in the fact section Alan has a good write up on vent windows.

62 Barnfind · 12-24-2012, 11:31 AM

Quote:

Originally Posted by duallyjams

The vent windows there are a couple of threads on this one is in the fact section.
This is a 2 person job well it is easier with 2 people , again measure everything first and take pics.
I followed the direction in the write up that Allen did for pulling them apart. After getting everything apart and cleaned up ( I did not paint anything, wanted to keep the truck as is ) I out them together different then Allen did.
First I put the flat rubber in first using the rivet and tool that comes in the kitAttachment 976208
now I took out the bottom 2 rivet and pulled the frame up enough to get the other gasket in. I sprayed the back of the gasket with WD40 , you can feel it when it pops into place
Attachment 976209
I used the tool to put the bottom 2 rivet back and used it on the one vent window river.
Attachment 976210
I installed the vent window assembly back into the then I used window weld and put the glass in now i did it this way because when I pulled them apart i left the glass in , after replacing all the rubber with the old glass they worked great until I reinstalled the into the door then they would not close so I pulled the glass out installed them into the door then installed the glass and they work

Where did you buy the tool at? I will be doing vent windows soon.

theastronaut · 12-24-2012, 11:53 AM

Everything looks great James!
Posted via Mobile Device

duallyjams · 12-24-2012, 02:43 PM

Quote:

Originally Posted by 62 Barnfind

Where did you buy the tool at? I will be doing vent windows soon.

mikes bump & grind but be for warn they are no longer a vendor on here do to a lot of bad deals

Quote:

Originally Posted by theastronaut

Everything looks great James!
Posted via Mobile Device

Thanks , I start by reading through one of your threads to see how you did it.

duallyjams · 01-19-2013, 06:10 PM

Time to address the truck leaning to one side. The PO lowered the truck by heating the spring with a torch.
Name: IMG_1225.JPG
Views: 2097
Size: 70.5 KB

Name: IMG_1226.JPG
Views: 2094
Size: 79.8 KB

grinder , air chisel , little heat , rivets flying
Name: IMG_1227.jpg
Views: 2089
Size: 51.0 KB

cut the spring to get it out but you can still what happens when you heat it up
Name: IMG_1228.jpg
Views: 2087
Size: 44.5 KB

duallyjams · 01-19-2013, 06:18 PM

I bought everything from NoLimit ( board vender )3" drop spring , 2" lowering blocks , shock relocator and shocks , panhard bar
Name: IMG_1229.jpg
Views: 2270
Size: 44.8 KB

Name: IMG_1229.jpg
Views: 2270
Size: 44.8 KB

Name: IMG_1236.JPG
Views: 2238
Size: 93.2 KB

old verses new
Name: IMG_1237.jpg
Views: 2221
Size: 42.0 KB

Name: IMG_1253.jpg
Views: 2314
Size: 52.5 KB

This is some really nice stuff . The only problems that I had was me not paying attention. Thanks to Rob from taking time out of his busy day to answer my question and help me along. Went for a quick ride and it's a big difference in ride quality.

Here is a thread about NoLimit parts http://67-72chevytrucks.com/vboard/s...d.php?t=477839

shawno72 · 01-19-2013, 06:37 PM

Looking good man!!

Bomp · 01-19-2013, 06:45 PM

Lookin good Man!

likaroc13 · 01-19-2013, 06:57 PM

looks nice! gotta ride better for sure

duallyjams · 01-20-2013, 03:12 PM

Quote:

Originally Posted by shawno72

Looking good man!!

thanks

Quote:

Originally Posted by Bomp

Lookin good Man!

Quote:

Originally Posted by likaroc13

looks nice! gotta ride better for sure

definitely worth it

theastronaut · 01-20-2013, 03:28 PM

That looks really good. I like the shock placement and angles.
Posted via Mobile Device

duallyjams · 01-22-2013, 03:44 PM

Went over to a buddy of mine shop , he made up some tail pipes for me.The truck is super quite now.
Name: IMG_1254.jpg
Views: 2020
Size: 56.5 KB

62 short step · 01-22-2013, 05:14 PM

What mufflers you running?

duallyjams · 01-22-2013, 05:36 PM

Quote:

Originally Posted by 62 short step

What mufflers you running?

magnaflow / I can post a pic if you want

62 short step · 01-22-2013, 06:15 PM

That's cool. Sounds good?

duallyjams · 01-23-2013, 12:24 PM

Quote:

Originally Posted by duallyjams

magnaflow / I can post a pic if you want

Quote:

Originally Posted by 62 short step

That's cool. Sounds good?

not the best pic
Name: IMG_1256.jpg
Views: 1953
Size: 46.4 KB

Name: IMG_1257.jpg
Views: 1962
Size: 41.9 KB

duallyjams · 01-27-2013, 05:07 PM

The rear kit from Rob ( Nolimit ) leveled out the truck. Can't say enough about how much I like his rear set up.
Name: IMG_1259.jpg
Views: 1945
Size: 66.9 KB

duallyjams · 01-27-2013, 05:11 PM

Today I gave in and replaced the steering box with one from http://www.redheadsteeringgears.com/ super fast delivery and a great product.This truck steers so easy with a manual box (even the wife has no trouble ) I didn't see the need to upgrade to power steering
Name: IMG_1258.jpg
Views: 2006
Size: 61.3 KB

Name: IMG_1258.jpg
Views: 2006
Size: 61.3 KB

duallyjams · 01-27-2013, 05:18 PM

Doing something with the bed wood soon will be on the to do list.
Name: IMG_1261.jpg
Views: 1960
Size: 76.2 KB

HugoV · 01-27-2013, 06:48 PM

What did the new steering box run you?
Posted via Mobile Device

duallyjams · 01-28-2013, 09:40 AM

Quote:

Originally Posted by HugoV

What did the new steering box run you?
Posted via Mobile Device

call them for a quote

66redw/white · 02-21-2013, 01:03 AM

really diggin on this truck man. youve done all the perfect fixes.

12-23-2012, 11:30 PM	#77
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: My brides new ride The new cluster looks great! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

12-24-2012, 03:22 AM	#78
hemifalcon Registered User Join Date: Jan 2012 Location: Antioch, IL Posts: 418	Re: My brides new ride Hey.. where did you get that tool for the vent window rivets??

12-24-2012, 11:53 AM	#81
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: My brides new ride Everything looks great James! Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

01-19-2013, 06:10 PM	#83
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: My brides new ride Time to address the truck leaning to one side. The PO lowered the truck by heating the spring with a torch. grinder , air chisel , little heat , rivets flying cut the spring to get it out but you can still what happens when you heat it up __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-19-2013, 06:18 PM	#84
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: My brides new ride I bought everything from NoLimit ( board vender )3" drop spring , 2" lowering blocks , shock relocator and shocks , panhard bar old verses new This is some really nice stuff . The only problems that I had was me not paying attention. Thanks to Rob from taking time out of his busy day to answer my question and help me along. Went for a quick ride and it's a big difference in ride quality. Here is a thread about NoLimit parts http://67-72chevytrucks.com/vboard/s...d.php?t=477839 __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-19-2013, 06:37 PM	#85
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: My brides new ride Looking good man!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-19-2013, 06:45 PM	#86
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: My brides new ride Lookin good Man!

01-19-2013, 06:57 PM	#87
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: My brides new ride looks nice! gotta ride better for sure __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-20-2013, 03:28 PM	#89
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: My brides new ride That looks really good. I like the shock placement and angles. Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

01-22-2013, 03:44 PM	#90
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: My brides new ride Went over to a buddy of mine shop , he made up some tail pipes for me.The truck is super quite now. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-22-2013, 05:14 PM	#91
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: My brides new ride What mufflers you running? __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

01-22-2013, 06:15 PM	#93
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: My brides new ride That's cool. Sounds good? __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

01-27-2013, 05:07 PM	#95
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: My brides new ride The rear kit from Rob ( Nolimit ) leveled out the truck. Can't say enough about how much I like his rear set up. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-27-2013, 05:11 PM	#96
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: My brides new ride Today I gave in and replaced the steering box with one from http://www.redheadsteeringgears.com/ super fast delivery and a great product.This truck steers so easy with a manual box (even the wife has no trouble ) I didn't see the need to upgrade to power steering __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-27-2013, 05:18 PM	#97
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: My brides new ride Doing something with the bed wood soon will be on the to do list. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

01-27-2013, 06:48 PM	#98
HugoV Registered User Join Date: Sep 2012 Location: Seattle, WA Posts: 65	Re: My brides new ride What did the new steering box run you? Posted via Mobile Device

02-21-2013, 01:03 AM	#100
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: My brides new ride really diggin on this truck man. youve done all the perfect fixes. __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.